KV8350 16" 3/4 Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8350B 16

Knape And Vogt 16 Inch Drawer Slide Use

Knape and Vogt 16 inch drawer slide delivers a 3/4 extension slide that lets the drawer open far enough for access while keeping some support inside the cabinet, which helps the drawer feel controlled on everyday use. The KV Model 8350 3/4 extension slide is made in the USA, giving shops and installers a consistent source when repeating jobs or matching existing runs. This side mount drawer slide uses ball bearing movement, so drawers travel along the slide with a smooth, guided action that benefits fitted cabinet work. The slide is described as a 16 inch length side mount unit, so it suits applications built around that nominal drawer depth. As a non-handed slide, the same member can be used on either side of the drawer, which simplifies layout, inventory, and installation steps on multi-drawer projects.

Key Drawer Slide Details For Projects

• The 3/4 extension slide design allows the drawer to open partway while leaving support inside the cabinet, which helps the drawer stay tracked during use on storage or utility drawers.
• The side clearance of 1/2 inch plus or minus 1/32 inch on each side defines the drawer-to-cabinet gap, guiding builders when sizing drawer boxes to fit this slide without guesswork.
• The 1-3/8 inch height gives a fixed rail size to work around, which matters when stacking drawers vertically or coordinating with face-frame layouts and clearances.
• The 32mm pattern noted for this slide lines up with system boring patterns, helping shops that drill on 32mm centers set up repeatable, measured mounting holes.
• The non-handed design lets the same slide model work on both left and right sides, which simplifies ordering and reduces part mixing during installation on job sites.
• The quick disconnect lever feature allows the drawer member to be separated from the cabinet member, which helps during drawer box installation, adjustment, or removal in tight cabinet interiors.

Side Mount Drawer Slide Fit And Setup

This 8350B 16 side mount drawer slide specifies 1/2 inch side clearance plus or minus 1/32 inch for each side, so the cabinet opening and drawer width can be planned to that tolerance when building or modifying boxes. The slide height of 1-3/8 inch sets how much vertical space the hardware occupies, which affects where to position the slide in relation to the drawer bottom or any internal dividers. With a 16 inch length, this ball bearing drawer slide matches drawer depths built around that measurement, supporting layouts that follow standard case depths. The recommended fasteners are #7 x 1/2 inch Phillips pan head, so installers can match that screw style during mounting to maintain the intended hold and fit.

Why This KV 8350 Slide Fits Real Jobs

Where The 16 Inch 3/4 Extension Slide Works

The KV Model 8350 3/4 extension slide at 16 inch length suits drawer openings that are dimensioned around a 16 inch slide, matching typical cabinet depths in many shop and residential builds. With side mount configuration, the slide runs along the drawer sides, which aligns with common carcass construction and existing cabinets already drilled for side mount hardware. The specified side clearance of 1/2 inch plus or minus 1/32 inch each side guides drawer box sizing, so shops can standardize on that gap for repeat runs. The 1-3/8 inch slide height allows this ball bearing drawer slide to sit along the drawer side while leaving room above and below for clearances or additional hardware, which matters when stacking drawers or working under a face frame. Because the slide is non-handed, a single 8350B 16 model fits both left and right sides, so installers can move from one cabinet to another without sorting handed parts.

Details That Support Consistent Drawer Performance

This Knape and Vogt 16 inch drawer slide is part of the KV Model 8350 line and uses ball bearing action, which supports a smoother travel path for the drawer under load compared to friction-only guides. The 3/4 extension design lets the drawer open a substantial distance while still retaining some slide length inside the cabinet, which contributes to stability during access. The 32mm pattern noted for this drawer slide matches system boring practices, giving production shops an easy way to align mounting holes with line-bored cases. With a quick disconnect lever, the drawer member can be separated from the cabinet member, which helps during finishing, transport, or later service where removing the drawer box gives better access. The slide is made in the USA, aligning this 8350B 16 model with domestic production runs that value consistent sourcing tied to a known manufacturer.

Common Questions About The KV 8350B 16 Slide

Selecting This 16 Inch Slide For Your Build

The KV Model 8350 3/4 extension slide in 16 inch length combines a side clearance of 1/2 inch plus or minus 1/32 inch with a 1-3/8 inch height, giving clear parameters for drawer box sizing. With ball bearing action, a non-handed layout, and a quick disconnect lever, this Knape and Vogt 16 inch drawer slide aligns well with cabinet and woodworking projects that rely on repeatable mounting and straightforward drawer removal. For projects matching these dimensions and style, this 8350B 16 side mount drawer slide is a practical choice to standardize on.