Omega National ST Series Tambour Hardware Pack 36"W x D, Plastic - ST-2-36-AL

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPST2A-36 to RSST2A-36.

Omega National ST Series Tambour Hardware Pack Use

Omega National ST Series Tambour Hardware Pack is a spring tension hardware system designed to control a vertical tambour door on a face frame cabinet opening. The spring tension hardware assists in opening the door, so the door movement starts smoothly rather than snapping, which helps with controlled operation on appliance garages and similar tambour door applications. The system is designed for face frame applications only, so it works specifically with cabinets built with a traditional face frame construction. It is engineered to control tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, which defines the operating range and helps align the hardware choice with door size. The hardware pack is identified as model ST-2-36-AL, which ties directly to this almond-colored tambour track configuration from Omega National Products.

Key Tambour Door Hardware Details In Practice

• The spring tension hardware will assist in opening the door, which helps the door start upward movement with less effort and creates a more controlled feel during operation.
• The system controls tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, so the hardware performance is matched to a specific range of door dimensions for predictable movement.
• Dowels can be trimmed for narrower door widths, which lets the same hardware kit adapt to smaller openings by adjusting the dowel length to the cabinet size.
• The door is easily controlled from top to bottom and glides smoothly, so the tambour travels along the guides without jerky motion, helping maintain consistent movement through the full stroke.
• The hardware is designed for face frame applications only, so the mounting approach is geared to cabinets built with a front frame, aligning the components with that construction style.
• The track is described as almond, which sets the visible color tone of the plastic guide rails and helps coordinate the hardware appearance with surrounding cabinet finishes.

Face Frame Tambour Track Mounting And Setup

The Omega National tambour hardware is designed for face frame applications only, so the layout centers on anchoring components to the back of a framed cabinet opening. The plastic guide rails for tambour doors define the travel path, so once aligned to the face frame opening, the door rides in a controlled vertical arc. The system is easily stapled to the back of the face frame, which simplifies attachment by using common fastening tools against the rear of the frame. Dowels can be trimmed for narrower door widths, so the wood dowel length is cut to fit the actual cabinet opening, keeping the spring assembly centered for the final width. Together, these details support a straightforward mounting process tailored to face frame cabinet construction.

Tambour Door Hardware In Real Cabinet Use

Where This ST-2-36-AL Tambour System Fits

The Omega National ST-2-36-AL tambour hardware system controls tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, so it aligns with small appliance garages and similar upper cabinet openings framed around those dimensions. Because the system is designed for face frame applications only, it fits cabinets built with a front frame, such as traditional kitchen wall cabinets that receive a vertical tambour door closure. The plastic guide rails for tambour doors define both sides of the travel path, so once fixed to the back of the face frame, they guide the door from counter level up into the cabinet interior. The almond description of the tambour track gives the rails a light, neutral color, which matters wherever the track edges remain visible around the moving door in the cabinet opening.

Why Spring Tension And Trimmed Dowels Matter

The spring tension hardware will assist in opening the door and allow assisted movement when opening, so the stored spring force helps the tambour door rise more easily and keeps movement smoother than a non-assisted track. This spring support reduces the effort needed at the start of travel, which is useful on appliance garage doors that are opened repeatedly throughout the day. The door is easily controlled from top to bottom and glides smoothly, so the combination of spring tension and plastic guide rails keeps movement steady along the full path, reducing sudden drops or stalls. Dowels can be trimmed for narrower door widths, so the same wood dowel and tension spring layout can be cut down to match different opening widths within the 36 inch limit, which helps apply the same hardware format across several cabinet sizes. The system description as Spring Tension hardware and plastic guide rails for tambour doors highlights that both force control and guided tracking are working together, which supports repeatable results when the door is moved through frequent daily cycles.

Common Questions About This Tambour Hardware

Selecting This Tambour Track For Your Opening

The Omega National ST Series Tambour Hardware Pack ST-2-36-AL is described as Spring Tension hardware that will assist in opening the door and allow assisted movement when opening, which supports smoother action on a vertical tambour. It is designed for face frame applications only and controls tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, so its operating window matches framed openings in that size range. With dowels that can be trimmed for narrower door widths and plastic guide rails for tambour doors that help the door glide smoothly, this almond tambour track offers a defined, size-specific solution for managing a vertical tambour door on a framed cabinet.