Omega National Tambour Hardware Pack 30"W x D, Plastic - ST-2-30-AL

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPST2A-30 to RSST2A-30.

Omega National Tambour Hardware Pack For Smooth Door Travel

Omega National tambour hardware pack is a spring tension tambour tracking system designed to control appliance garage and tambour doors in face frame cabinetry. The system uses spring tension hardware to assist in opening the door, so the door movement is supported instead of relying only on manual force. That assistance makes repeated daily operation easier in busy kitchen or shop environments. The hardware is designed for face frame applications only, which focuses its use on common cabinet construction in many kitchens. Plastic guide rails manage the path of the tambour door, keeping travel aligned within the track. This control helps the door glide smoothly from top to bottom, reducing binding points and improving user feel. The system is designed for tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, matching many appliance garage door sizes.

Key Tambour Tracking Details For Daily Cabinet Use

• The spring tension hardware assists opening the door, so the tambour lifts with less effort during regular cabinet access.
• The system allows assisted movement when opening, which helps provide a more controlled door motion as it starts moving.
• The hardware is designed for face frame applications only, focusing installation on typical framed cabinet construction.
• Plastic guide rails control tambour doors, guiding the slats so the door travels in a consistent track.
• The system controls tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, matching many appliance garage dimensions.
• Dowels can be trimmed for narrower door widths, so the same system can adapt to various cabinet openings.
• The door is easily controlled from top to bottom, supporting smooth operation through the full opening and closing cycle.
• The guide rails can be stapled to the back of the face frame, providing a straightforward fastening approach in wood cabinetry.

Face Frame Tambour Door Installation And Tracking

This tambour tracking system is designed for face frame applications only, so it aligns with cabinets built around a framed opening. The guide rails are plastic, and they can be stapled to the back of the face frame, giving a direct mounting surface for the track. Once installed, the plastic guide rails provide a path that controls the tambour door from top to bottom, helping it avoid side-to-side play. The system is specified to control tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, which helps define suitable cabinet openings. Dowels in the system can be trimmed for narrower door widths, allowing the hardware to adapt when the opening is less than 36 inches.

How This Tambour Tracking System Works In Cabinets

Where The Tambour Tracking System Is Applied

This tambour tracking system is in the product class of appliance garages and tambour doors, so it is suited to cabinet openings where a roll-style door is desired. The hardware is designed for face frame applications only, focusing its use on framed cabinet layouts commonly found in kitchen wall or counter cabinetry. The system uses plastic guide rails for tambour doors, so the rails sit directly behind the face frame and define the travel path. Because the system controls tambour doors up to 36 inches wide, 19 inches high, and 7/32 inch thick, it addresses many standard appliance garage door sizes without needing multiple different systems for similar openings.

Why The Spring Tension And Adjustability Matter

The spring tension hardware will assist in opening the door, so the tambour starts upward travel with added force from the spring rather than only from the user. That assistance can make repeated openings feel more controlled, especially where the door height reaches up to 19 inches. The system also allows assisted movement when opening, which supports smoother initial motion as the tambour transitions from closed to moving in the track. The door is easily controlled from top to bottom, because the plastic guide rails and tracking system keep the slats following a guided path. Dowels can be trimmed for narrower door widths, so a single 30 inch wide system can be cut down to fit smaller openings while keeping the same tension and control components.

Common Questions About Omega National Tambour Hardware

Select This Tambour Tracking System For Face Frames

The Omega National tambour hardware pack ST-2-30-AL combines spring tension hardware, plastic guide rails, and trim-to-fit dowels to control a tambour door in a face frame cabinet. For appliance garage or similar tambour openings within the stated size range, this system provides assisted opening and guided travel from top to bottom. The ability to trim the dowels for narrower widths lets the same hardware layout adapt to smaller framed openings. When a project calls for a controlled tambour action in face frame cabinetry, this tambour tracking system provides a defined solution based on its specified dimensions and application.