Doellken PVC Edgebanding 15/16" x 1 mm, 2425 Fog Grey, 300', 2425 1540 1

PVC Edgebanding 1mm 15/16 x 300 For Matching Panels

PVC edgebanding 1mm 15/16 x 300 describes a Doellken Woodtape edge banding roll that covers raw board edges with a consistent Fog Gray surface, which helps transition sheet goods to finished cabinet parts in one continuous color. The 1mm thickness creates a defined edge profile along doors, drawer fronts, and casework, which supports a substantial look compared to thinner tape. The 15/16 inch width works with common 3/4 inch panels while allowing trim allowance, which supports tight visual lines after trimming and flushing. The 300 foot roll length keeps the material continuous on larger runs, which reduces roll changes during production. The color designation Fog Gray 2425 ties the strip to a coordinated finish tone, which matters when running work that must visually align with Fog Gray laminate or TFL programs.

Key Fog Gray 2425 Color Match Advantages

• The color match note to Arauco Prism SF213 Fog Grey Suede 2425 Good ties this PVC edgebanding to a specific TFL program, which helps maintain a consistent face and edge appearance on cabinet parts using that board.
• Listing Arclin U212 Fog Grey 2425 Good and KML KMD722 Fog Grey Classic 2425 Good connects the same 2425 tone across different board suppliers, which supports mixed-vendor projects where edges still need to read as one coordinated color.
• The 2425 Close rating for Formica 961 Fog 58_Matte and Lamitech 2108 Fog gives a near tone relationship, which helps when edging laminate casework where a close visual match is acceptable on edges versus faces.
• The 2425 Good match callout for Roseburg Duramine 022 London Grey S_Suede and Tafisa L201 Autumn Shadows Crystalite supports tying PVC edges to those decorative surfaces, which keeps doors and panels visually aligned on gray programs.
• Referencing Nevamar S6012 Neutral Gray T_Textured and Panolam S551 Fog Grey Satin with 2425 Good notes shows that this single PVC color can serve multiple HPL lines, which simplifies inventory when different gray laminates share jobs.
• Calling out Uniboard 168 Canadian Grey Dolomite 2425 Good and Pionite SG213 Opti Grey N_Suede 2425 Close connects this edge banding to additional panel lines, which helps shops standardize on one Fog Gray PVC for varied specifications.

Edgebanding Dimensions That Support Clean Installation

The 15/16 inch width on this PVC edgebanding, Color 2425 Fog Gray, 1mm Thick 15/16 x 300 roll gives coverage beyond a 3/4 inch core, which leaves trimming allowance for flush routing and scraping. That extra width supports hiding slight panel size variation while still finishing to a clean line. The 1mm thickness indicated in the product name creates a more substantial edge than ultra-thin tapes, which can help the profile read crisply after trimming. This Doellken Woodtape edge banding is specified as a PVC material in the category Edgebanding, PVC, which supports typical machining and trimming workflows used with PVC on edgebanders.

Where Fog Gray 2425 Edgebanding Fits Your Work

Using 2425 Fog Gray With Specific Board Programs

The color match listing to Arauco Prism SF213 Fog Grey Suede 2425 Good positions this PVC edgebanding as a direct edge option when that TFL sets the job standard, which keeps door and case edges in the same Fog Grey family. The match notes for Funder 128 Fog #4_Suede 2425 Good and Thermo Pressed TFL-003 Fog 2425 Close extend that role to additional TFL producers, which allows similar gray programs to share a single edge color. Calling out Timber Products Opti Grey 2425 Close links the same roll to that panel option, which matters when a project is specified around Opti Grey tones that still need compatible edges. The ties to Uniboard 168 Canadian Grey Dolomite 2425 Good and Wilsonart Opti-Grey 2425 Good show that Fog Gray 2425 is positioned as a common thread across these decorative lines, which lets a shop run coordinated gray casework even when the core boards or laminates come from different brands.

Why 1mm Doellken PVC Helps Consistent Results

The PVC Edgebanding, Color 2425 Fog Gray, 1mm Thick 15/16 x 300 roll uses a 1mm thickness that gives the edge profile some body, which helps the finished edge stand up visually along doors and cabinet parts compared to thinner PVC films. Being part of the Edgebanding, PVC category at Wurth Baer Supply places this product in the standard PVC processing family, which aligns with common hot-melt and trimming setups used in woodworking shops. The 300 foot roll length noted in the name supports longer production runs of Fog Gray components, which reduces changeovers and helps maintain color continuity across multiple cabinets or full jobs. Identifying the brand as Doellken Woodtape connects the roll to a dedicated edge banding manufacturer, which supports consistent material behavior when applying, trimming, and finishing Fog Gray edges across repeat orders.

Common Questions About Fog Gray 2425 Edgebanding

Select Fog Gray 2425 Edgebanding For Coordinated Jobs

The PVC Edgebanding, Color 2425 Fog Gray, 1mm Thick 15/16 x 300 roll ties directly to multiple TFL and HPL colors noted as 2425 Good or 2425 Close, which supports unified gray casework programs. The 1mm thickness and 15/16 inch width provide a practical edge profile for common panel dimensions, which fits cabinet and fixture components using Fog Gray designs. For projects referencing Arauco Prism SF213 Fog Grey Suede, Roseburg Duramine 022 London Grey, or similar 2425-related colors, this Doellken Woodtape PVC roll offers a defined, coordinated edge solution.