PVC Edgebanding, Color 2425 Fog Gray, 3mm Thick 15/16" x 328' Roll

PVC Edgebanding 3mm 15/16 Fog Gray For Casework

PVC edgebanding 3mm 15/16 Fog Gray describes this Doellken Woodtape edge banding that finishes panel edges in a neutral grey tone, so cabinets, fixtures, and partitions match the specified board color across exposed edges. The 3mm thick PVC construction builds a substantial edge, which helps create a solid visual profile on doors, drawer fronts, and work surfaces. The 15/16 inch width is sized for common 3/4 inch panels, giving extra trim margin for a clean, straight final edge. The 328 foot roll length supports longer runs of cabinets or commercial casework, reducing roll changes on repetitive jobs. Color 2425 Fog Gray is designed to coordinate with fog grey and opti grey board tones, helping projects keep a consistent face and edge color relationship. This edge banding serves as part of the edgebanding and surfacing system for laminate and TFL-based constructions.

Fog Gray PVC Edge Banding Jobsite Advantages

• The 3mm thick PVC edge banding builds a pronounced edge profile, which supports impact-resistant-looking edges and hides core transitions on doors and panels.
• The 15/16 inch width on this edge banding provides coverage past 3/4 inch panels, giving trimming room for flush, chip-free edges along cabinet runs.
• The 328 foot roll length keeps more continuous footage on hand for production, which reduces changeover interruptions on shops running repeated fog grey components.
• The Doellken Woodtape brand identifies this product as a PVC edgebanding line, aligning it with professional edgebanding and surfacing workflows in woodworking shops.
• The PVC material classifies this product within edgebanding and surfacing, fitting typical panel processing steps for laminate, TFL, and composite board edges.

Dimensions And Color Matching In Installation

The 15/16 inch width on this Doellken Woodtape PVC edgebanding gives installers extra edge to trim, helping achieve clean, straight edges on standard thickness casework. The 3mm thickness creates a durable edge banding profile that visually masks the substrate edge during installation and in service. Color 2425 Fog Gray is referenced as a color match to Arauco Prism SF213 Fog Grey Suede with a rating of 2425 Good, supporting use on that decorative panel when a coordinated edge is required. The same 2425 color is rated Good or Close against multiple gray decorative surfaces, so installers can align edge color with a range of fog and opti grey faces across different laminate and TFL product lines.

Where Fog Gray PVC Edgebanding Works Best

PVC Edgebanding For Fog And Opti Grey Panels

This PVC edge banding in color 2425 Fog Gray is labeled as a color match to Arauco Prism SF213 Fog Grey Suede with a Good rating, so it suits casework and fixtures made from that specific fog grey TFL. It is also referenced as Good against Arclin U212 Fog Grey, KML KMD722 Fog Grey Classic, Panolam S551 Fog Grey Satin, Roseburg Duramine 022 London Grey S_Suede, Tafisa L201 Autumn Shadows Crystalite, Uniboard 168 Canadian Grey Dolomite, and Wilsonart Opti-Grey, aligning the edge tone closely with these board and laminate faces. Additional references list this same 2425 color as Close for Arclin U7668 Opti Grey, Formica 961 Fog 58_Matte, Lamitech 2108 Fog, Pionite SG213 Opti Grey N_Suede, Thermo Pressed TFL-003 Fog, and Timber Products Opti Grey, so it can be used where a Close relationship between face and edge color is acceptable in the design intent.

Edgebanding Details That Support Consistent Results

The 3mm thickness of this Doellken Woodtape PVC edgebanding creates a substantial edge, which supports consistent visual lines along cabinet doors and work surfaces when applied across an entire project. The 15/16 inch width paired with that thickness allows installers to process standard panel edges while trimming slightly oversize material, helping maintain straight, repeatable edge reveals. The 328 foot roll format supplies enough length to run multiple cabinets or a full bank of casework from a single roll, supporting consistent color and lot appearance across all edges using color 2425 Fog Gray. The manufacturer part number 2425-1503-1 uniquely identifies this specific combination of color, thickness, width, and roll length, which helps shops reorder the exact same edge banding for future phases or repeat jobs.

Common Questions About 2425 Fog Gray Edgebanding

Select PVC Edgebanding 3mm 15/16 Fog Gray Today

This Doellken Woodtape PVC edgebanding, 3mm thick and 15/16 inch wide in color 2425 Fog Gray, supports fog and opti grey projects that require coordinated edges. The 328 foot roll format fits production runs of cabinets and casework matching these gray decorative surfaces.