Edgebanding 2428, Shadow 1mm Thick x 15/16" Width

Edgebanding 2428 Shadow 1mm For Laminate Work

Edgebanding 2428 Shadow 1mm gives you a PVC edge banding option in a Shadow color tone for finishing laminate and board edges on cabinets, fixtures, and similar casework. The 1mm thickness of this Doellken Woodtape product adds a noticeable edge profile that helps visually match typical laminate build while covering the raw substrate. The 15/16 inch width works with common panel thicknesses, giving you enough coverage over the edge and a small trim allowance along both faces. As an edge banding from the Edgebanding, PVC class, it is suited for projects where a PVC solution is preferred alongside laminate surfaces. The product identity and format support runs where a consistent Shadow appearance is needed along exposed edges in a shop or onsite installation workflow.

Shadow Edge Banding Details That Support Workflow

• The 1mm thick construction provides a sturdy PVC edge that can be trimmed and flushed, which supports clean edges along cabinet and fixture components.
• The 15/16 inch width gives modest overhang on standard panels, which helps during banding and final trimming for a tight visual line with the face laminate.
• The Shadow color tone is identified for matching, which supports projects where edge color needs to coordinate closely with Shadow-oriented laminate designs.
• Being part of the Edgebanding, PVC category defines it as a PVC option, which matters when aligning edge materials with PVC-focused shop processes.
• The product is presented as edge banding for casework and similar applications, which fits workflows where exposed board edges must be closed off and visually tied to the laminate field.

Shadow Edge Banding Size And Fit Considerations

The 15/16 inch width on this Edgebanding 2428 Shadow 1mm product gives fabricators working room over typical 3/4 inch panels, allowing the band to fully cover the edge before trimming. The 1mm thickness presents a solid PVC edge that responds well to standard trimming tools, helping maintain straight lines along doors, drawer fronts, and carcass parts. As Doellken Woodtape edge banding in PVC form, it fits into workflows that rely on established PVC banding equipment and methods for bonding to laminates and composite cores. The defined Shadow color supports building consistent runs wherever matching Shadow edges are part of the finished design.

Where This Shadow Edge Banding Works Best

Shadow Grey Edges For Matching Laminate Designs

This Doellken Woodtape edge banding is specified with a Shadow color identity that aligns with popular laminate shades, which helps create a continuous look between the panel face and the edge. The web description states a color match to Arclin U636 Shadow Grey with a Good rating, which ties the edge visually to that laminate line in Shadow Grey projects. It also notes a Good color match to Pionite SG210 Greige in a Suede finish, allowing the same 1mm Shadow band to support projects using that Pionite decor. In addition, a Good match is specified to Wilsonart D96 Shadow in a 60 Matte finish, so the same banding can serve Shadow-oriented Wilsonart work. These stated color match relationships help shops run coordinated jobs across multiple laminate brands while keeping a single Shadow edge solution in stock.

Dimensions And Details That Support Consistent Results

The 1mm thickness on Edgebanding 2428 Shadow 1mm provides a balanced edge depth that is thicker than very thin tape yet manageable on common banders, supporting repeatable cutting and flushing. The 15/16 inch width gives a bit of extra coverage beyond standard panel thickness, which helps account for slight panel variation and trimming tolerances while still landing a clean line with the face surface. As an Edgebanding, PVC product, it is designed for the types of adhesive and equipment typically used with PVC edges, supporting a steady workflow in commercial cabinet and fixture shops. The manufacturer part number 2428-1540-1 clearly defines this Shadow, 1mm thick, 15/16 inch width configuration so shops can reorder the exact same banding and keep visual results consistent across repeat jobs and field service replacements.

Common Questions About Edgebanding 2428 Shadow 1mm

Select Edgebanding 2428 Shadow 1mm For Shadow Runs

Choose Edgebanding 2428 Shadow 1mm when a Shadow-toned PVC edge is required to coordinate with Shadow Grey and similar laminate colors on cabinets, fixtures, or casework. The defined 1mm thickness and 15/16 inch width support consistent trimming and alignment, keeping edges visually tied to the face laminates. The documented Good color relationships to Arclin U636 Shadow Grey, Pionite SG210 Greige Suede, and Wilsonart D96 Shadow 60 Matte help align this single banding with multiple laminate programs. Using the exact manufacturer part number 2428-1540-1 allows shops to match past work and maintain uniform Shadow edges across new production and follow-up projects.