Doellken PVC Edgebanding 15/16" x 0.018", 2428 Shadow, 600', 2428 1518 1

PVC Edgebanding 2428 Shadow For Clean Panel Edges

PVC edgebanding 2428 Shadow is a Doellken Woodtape edge banding designed to finish and protect exposed panel edges in a consistent Shadow tone, which helps bring laminate and board faces and edges into visual alignment on completed work.

This PVC edgebanding is 0.018 inch thick, so it adds a slim, controlled layer to the substrate edge while keeping profiles tight and minimizing transition between face material and edge for a more uniform look.

The 15/16 inch width gives coverage across standard 3/4 inch panels with allowance for trim, so installers can route or trim back to a crisp, straight line without risking reveal of the core material during finishing.

The 600 foot roll length supports longer production runs or multiple jobs from a single roll, which reduces changeover during fabrication and helps keep edge-banding operations moving efficiently in the shop.

The color 2428 Shadow is specified to visually coordinate with Shadow and greige laminate tones, so edges can track closely with popular gray-based surfaces across cabinets, fixtures, and other casework.

Key PVC Edgebanding Details For Shadow Finishes

• The Doellken Woodtape brand provides a defined PVC edgebanding source, which supports consistent appearance when projects repeat the same color and thickness across different runs.
• The 0.018 inch thickness sets a light-duty profile that is easy to trim and scrape, which is useful where a thin edge is preferred to keep corners from looking bulky on finished components.
• The 15/16 inch width allows slight overhang on typical 3/4 inch material, which gives installers room to align and trim edges flush while covering minor panel-size variation.
• The 600 foot roll length reduces roll changes on edging equipment, which helps maintain pacing on shop lines and supports small production batches from the same color run.
• The 2428 Shadow color targets Shadow and greige tones, which helps designers and builders hold a coordinated gray scheme between face laminates and edges on cabinetry and furniture.

Edgebanding Size And Color Match In Installation

The 0.018 inch thickness works well where a slim PVC edge is desired because it keeps the transition at the panel perimeter subtle, which is helpful when matching flat matte finishes on cabinet and casework faces.

The 15/16 inch width interacts well with standard machining because it allows slight tolerance during application, which lets installers position the banding confidently before routing or trimming back to the finished dimension.

The 600 foot roll length supports uninterrupted edging on long cabinet runs or multiple units, which helps maintain color continuity from piece to piece when every part is drawn from the same roll.

The 2428 Shadow tone is aligned with Shadow-style grey colors, so when it is paired with similar laminates the edge can visually recede, which keeps attention on the overall panel surface rather than the seam line.

Shadow Grey PVC Edgebanding In Real Projects

Where This Doellken Woodtape Edgebanding Fits

This PVC edgebanding, in color 2428 Shadow, is suited to projects built around Shadow grey and greige laminate schemes, because its tone is specified to visually coordinate with those families on finished cabinets and fixtures.

The color match reference to Arclin U636 Shadow Grey at a good level means this banding is configured to track closely with that laminate shade, which helps when casework or panels are specified in that Arclin color.

The match callout to Pionite SG210 Greige N_Suede at a good rating indicates the PVC tone is tuned for that greige surface, which supports building entire runs of panels and doors with that laminate and this edge in one coordinated system.

The good match to Wilsonart D96 Shadow in 60_Matte signals that this edgebanding color is calibrated for that matte Shadow grey laminate, which matters when building kitchens, offices, or fixtures that rely on that Wilsonart reference.

The Doellken Woodtape brand positioning in edge banding means this product is designed specifically as PVC edgebanding, so it integrates naturally into standard shop workflows dedicated to edging laminated or coated wood-based panels.

Why These Shadow Color Matches Support Results

The stated good color match to Arclin U636 Shadow Grey helps reduce visible shift between face and edge when panels are edged, which supports tight visual alignment on doors, drawer fronts, and cabinet sides built around that laminate.

The good match to Pionite SG210 Greige N_Suede allows the edge to read as part of the same greige family rather than a separate tone, which keeps installations from showing distracting contrast lines at seams and door perimeters.

The good match to Wilsonart D96 Shadow in a 60_Matte finish means the edge color can follow that specific matte Shadow shade, which helps fixture builders and millwork shops keep large installations visually consistent across many components.

The combination of 0.018 inch thickness and 15/16 inch width pairs a slim edge with workable coverage, which lets fabricators process this roll on typical edge-banding equipment while holding fine visual lines on finished cabinet parts.

The 600 foot roll length means multiple cabinets or an entire small project can be run from one coil, which helps all visible edges stay within the same color batch for more uniform Shadow or greige presentation.

The manufacturer part number 2428-1518-1 uniquely identifies this Shadow PVC edgebanding specification, which helps shops reorder the exact same color, width, and thickness when they repeat jobs or expand an existing installation.

Common Questions About 2428 Shadow PVC Edgebanding

Select 2428 Shadow Edgebanding For Coordinated Work

The 2428 Shadow PVC edgebanding from Doellken Woodtape combines a 0.018 inch thickness, 15/16 inch width, and 600 foot roll length with documented good color matches to Arclin U636 Shadow Grey, Pionite SG210 Greige N_Suede, and Wilsonart D96 Shadow 60_Matte, so it supports running Shadow-toned projects with consistent edges. For work that specifies those laminate references or similar Shadow and greige tones, this roll lets shops align face materials and edges while maintaining repeatable dimensions and color across cabinet and fixture components.