
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
PVC edgebanding slate gray from Doellken Woodtape provides a finished edge solution in Color 2431 Slate Gray, so cabinet and fixture projects gain a consistent, uniform look along exposed board edges. The 1mm thickness gives the edge a substantial profile, supporting everyday use on casework, shelving, and similar components. The 15/16 inch width suits common panel thicknesses where a slight overhang can be trimmed flush for a clean, professional line. A 300 foot roll format supports longer production runs or multiple cabinets without frequent changeover, helping installers and shops keep workflow moving. As an edge banding product in the Edgebanding & Surfacing category, it is designed to visually coordinate with specified laminates, so door and panel faces transition smoothly to their edges in the same slate gray tone.
This 15/16 inch x 1mm PVC edge banding is sized so installers can run it slightly proud of the panel and then trim flush, supporting tight seams on straight cabinet edges. The slate gray color is specified as Color 2431 Slate Gray, so it visually supports slate-toned laminate layouts across doors, drawer fronts, and end panels. The 300 foot roll format keeps a single color reference available through multiple pieces on the same project, helping maintain a consistent tone from base cabinets through wall units. As edge banding within the Edgebanding & Surfacing category, it plays the role of finishing exposed board edges so the substrate is covered and only the slate gray finish is seen in the completed installation.
The Color 2431 Slate Gray tone is described with color match references such as Arborite S-508 Cordova Brown CA_Cashmer, Arclin U637 Slate, and Formica 837 Graphite 58_Matte, which indicates its role in coordinating with dark, slate-inspired laminates. Additional references like Lamitech 2174 Graphite, Nevamar S6014 Black Pearl T_Textured, and Pionite SG228 Slate N_Suede show that this edge banding is positioned for use alongside multiple graphite and slate laminate families. Mentions of Pluswood 95S Slate Gray, Roucke Slate, Thermo Pressed TFL-006 Charcoal, and Wilsonart D91 Slate Grey connect this roll to a broad slate gray palette across different laminate and TFL product lines. In practice, these references let shops align the 2431 Slate Gray edge with faces sourced from various brands, so cabinet runs, counters, or fixtures present a coordinated slate look from surface through the edge.
The 1mm thickness on this Doellken Woodtape edge banding gives installers material to work with when trimming, so cutting flush to the panel can produce a sharp transition from face to edge. The 15/16 inch width provides coverage beyond the typical board thickness, which supports accurate trimming on both faces and minimizes exposed substrate after finishing. Identifying this product by manufacturer part number 2431-1540-1 creates a clear reference when matching roll stock to laminate color charts, so repeat orders bring the same slate gray tone back to the shop. Being categorized as PVC edgebanding within Edgebanding & Surfacing ties it directly to laminate and surfacing workflows, where a consistent edge color helps maintain design intent across doors, partitions, and shelving components.
This PVC edgebanding measures 15/16 inch wide and 1mm thick, giving coverage for typical panel edges with enough material for clean trimming and a defined finished profile.
The Doellken Woodtape PVC edgebanding roll is 300 feet long, supporting multiple cabinets or casework runs while keeping the slate gray color consistent across the project.
This edge banding references finishes such as Wilsonart D91 Slate Grey, Formica 837 Graphite, Pionite SG228 Slate, Pluswood 95S Slate Gray, and other slate and graphite tones.
This roll is PVC edge banding from Doellken Woodtape, classified under Edgebanding & Surfacing in the Edge Banding product class for laminate and surfacing projects.
This slate gray edge banding is identified by manufacturer part number 2431-1540-1 and the description 15/16X1MM EB, SLATE GREY 300FT/RL.
Color 2431 Slate Gray lets the edge visually coordinate with slate and graphite laminate faces, so exposed board edges present a continuous slate gray appearance.
This 15/16 inch x 1mm PVC edgebanding in Color 2431 Slate Gray gives shops and installers a defined way to finish slate-toned laminate projects with a coordinated edge. The 300 foot roll length supports full cabinet or fixture runs under one color reference, helping maintain a consistent visual line from panel faces to edges. With Doellken Woodtape branding and manufacturer part number 2431-1540-1, it provides a clear, repeatable option when specifying slate gray edging for current jobs and future repeat work.
Sold In: 300 Lineal Ft
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 600 Lineal Ft | WT9375-18-2431 Mfr# 2431-1518-1 | PVC Edgebanding, Color 2431 Slate Gray, 0.018" Thick 15/16" x 600' Roll | ||||
Sold in: 328 Lineal Ft | WT9375-118-2431 Mfr# 2431-1503-1 | PVC Edgebanding, Color 2431 Slate Gray, 3mm Thick 15/16" x 328' Roll | ||||
Sold in: 600 Lineal Ft | WT13125-20-2431 Mfr# 2431-2120-1 | PVC Edgebanding, Color 2431 Slate Gray, 0.018" Thick 1-5/16" x 600' Roll | ||||
Sold in: 328 Lineal Ft | WT13125-118-2431 Mfr# 2431-2103-1 | PVC Edgebanding, Color 2431 Slate Gray, 3mm Thick 1-5/16" x 328' Roll |