Doellken PVC Edgebanding 1 5/16" x 3 mm, 2431 Slate Grey, 328', 2431 2103 1

PVC Edgebanding 3mm 1-5/16 Slate Gray Use

PVC edgebanding 3mm 1-5/16 Slate Gray describes a Doellken Woodtape edge banding roll that finishes exposed board edges with a Slate Gray color. The 3mm thickness creates a substantial edge profile, which helps match thicker laminated tops or doors visually. The 1-5/16 inch width covers typical panel thickness plus a trim allowance, so edges can be flushed off cleanly after bonding. The 328 foot roll length supports longer runs or multiple jobs before changing rolls, which reduces downtime between cabinets or fixture sections. The Slate Gray tone is identified as color 2431, which ties directly to common laminate design numbers when matching fronts and edges. As a PVC product in the Edgebanding & Surfacing category, this material is designed to coordinate with laminate and surfacing work in cabinet and casework production.

Slate Gray PVC Edgebanding Job Advantages

• The 3mm thick edge banding builds a more robust edge profile, which supports a heavier visual line on doors, drawer fronts, and tops where a thicker edge detail is desired.
• The 1-5/16 inch strip width gives coverage across standard board thickness with extra material for trimming, which allows clean flush trimming without exposing the core material.
• The 328 foot roll length provides extended continuous footage, which supports efficient edging on larger projects or repeated production runs without frequent roll changes.
• The Slate Gray color identified as 2431 is formulated to coordinate with specific decorative surfaces, which helps maintain a consistent appearance between flat laminate faces and banded edges.
• The Doellken Woodtape brand designation places this product within a recognized edge banding line, which supports consistent color naming and part-number-based reordering.

Edge Banding Dimensions For Accurate Application

The 1-5/16 inch width on this PVC edgebanding leaves working room beyond standard panel thickness, which supports precise trimming without risking edge blow-through. The 3mm thickness builds a noticeable edge that can align with heavier laminate or design requirements, especially on fronts where the edge becomes a design line. The 328 foot roll length simplifies planning of linear footage on shop drawings because one roll can cover a substantial run of cabinet parts or shelves. The defined Slate Gray color 2431 aligns with common surfacing colors, which streamlines layout when planning which edges will receive this specific tone in a project.

Using This 2431-2103-1 Edge Banding Roll

Where Slate Gray PVC Edgebanding Performs Best

This PVC Edgebanding, Color 2431 Slate Gray, fits directly into projects using coordinating surfacing from brands identified in the web description. The listing notes color match to Arborite S-508 Cordova Brown, which lets fabricators carry that tone onto exposed board edges. It also notes match to Arclin U637 Slate, supporting use wherever that decorative surface appears on cabinet cases or panels. Formica 837 Graphite in Matte finish is referenced, connecting this banding to installations where that pattern runs across worktops or vertical faces. Matches to Lamitech 2174 Graphite and Nevamar S6014 Black Pearl in Textured finish allow the same edge material to serve across multiple laminate lines in a shop. References to Pionite SG228 Slate in Suede finish, Pluswood 95S Slate Gray, Roucke Slate, Thermo Pressed TFL-006 Charcoal, and Wilsonart D91 Slate Grey extend use to additional laminate and TFL programs that share this Slate-toned palette.

Why Dimensions And Color Match Support Results

The 3mm thickness interacts well with the wide list of Slate-oriented laminates in the description because the stronger edge line visually anchors darker or graphite patterns. The 1-5/16 inch width provides enough coverage for boards clad with those named laminates, which lets fabricators trim edges flush without showing raw core next to Wilsonart D91 Slate Grey or similar tones. The 328 foot roll length supports consistent color all along casework lined with Arborite S-508 Cordova Brown or Arclin U637 Slate, since pulls come from a single production roll. The Doellken Woodtape manufacturer identity linked to part number 2431-2103-1 gives shops a precise reference when standardizing Slate Gray edges across multiple laminate brands. Positioning this product in the Edgebanding, PVC class defines it as part of the surfacing workflow, tying edge finishing directly to the laminate design selections in the job schedule.

Common Questions About Slate Gray PVC Edgebanding

Select This 2431 Slate Gray Banding For Projects

This PVC Edgebanding, Color 2431 Slate Gray, 3mm Thick 1-5/16 x 328 foot Roll from Doellken Woodtape ties edge treatment directly to specific laminate design numbers. When a project uses these named Slate and graphite tones, this roll gives a defined way to carry that color onto every exposed panel edge.