Salice Excentra S face frame hinge is a concealed cabinet hinge designed to provide perfect closing to any kind of door, so doors pull in consistently and give built-in furniture a clean, uninterrupted look. This Salice Excentra S face frame hinge delivers 106 degree opening, which provides generous access to cabinet interiors while still controlling the door swing for typical kitchen or shop layouts. The hinge uses all steel one piece construction with nickel plating to resist corrosion, helping the hardware stay stable in everyday woodworking environments. A cup depth of only 11 mm allows this hinge to be used on most door styles, which helps standardize boring setups across a run of fronts. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so common door builds in kitchens, baths, and casework fall inside its working range. All hinges are self-closing design, pulling doors shut without separate closing components.
Salice 1-3-8 overlay hinge is designed for face frame cabinets where the door overlays the frame by 1-3/8 inch, which helps match common overlay layouts in kitchen and bath runs. Hinge cup edge drilling distance is 2.5 mm, giving a known reference from the door edge that streamlines CNC or line-boring programs. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so installers can use typical door constructions without adjusting for unusual thickness limits. A cup depth of only 11 mm allows this hinge to be used on most door styles, which reduces the risk of boring through thin panel sections or routed profiles during machining. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so shops can add controlled closing using matching components without changing boring patterns.
Salice CSR3C99NR hinge sits in the concealed cabinet hinges class and is built for face frame applications, so it suits installations where hardware should stay hidden when the door is closed. The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common rail-and-stile and slab constructions in residential kitchens and shop-built casework. A cup depth of only 11 mm allows this hinge to be used on most door styles, which helps when profiles or thinner center panels limit boring depth. Hinge cup edge drilling distance is 2.5 mm, offering a precise reference from the door edge that fits standard hinge boring jigs or CNC setups in production or serious DIY shops. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, allowing doors to open without projecting into the cabinet opening, which is useful around interior pull-outs, trays, or equipment.
This 3-cam adjustable hinge provides the best side to side adjustment in the industry, so installers can address butt door problems directly at the hinge by shifting doors relative to each other after hanging. Excentra, three cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, which moves the door in or out relative to the face frame to tighten gaps or align planes across a run. The same hardware provides cam lateral adjustment from plus 3.0 mm to minus 2 mm, giving room to correct uneven reveals between doors or between a door and a finished panel without remounting the cup. Slotted screw hole height adjustment of plus or minus 2 mm lets the door move up or down slightly, which is valuable when stacking several doors in a tall cabinet and aligning rails. All hinges are self-closing design, so once alignment is dialed in, the hinge continues to pull the door to the frame consistently. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, providing a path to add soft closing while keeping the existing adjustment range and hinge geometry.
The hinge is a concealed cabinet hinge for face frame cabinets, so it mounts to a face frame and keeps hardware out of sight when the door is closed.
The hinge is a 1-3/8 inch overlay face frame hinge, so the door overlays the face frame by 1-3/8 inch, which fits layouts calling for that overlay dimension.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, so typical kitchen and bath door builds stay within its operating range.
The Excentra hinge provides cam depth, lateral, and height adjustments, allowing fine-tuning of reveals and alignment without altering door or frame machining.
The hinge uses an 11 mm cup depth and a 2.5 mm hinge cup edge drilling distance, so boring operations reference those values for consistent hinge cup placement.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft closing can be added using matching Salice components.
Salice 106 degree concealed hinge design gives a controlled, wide opening that suits everyday cabinet access. The hinge is a 1-3/8 inch overlay face frame hinge, matching layouts that call for that overlay on framed cabinets. This 3-cam adjustable hinge provides depth, lateral, and height adjustments, which help dial in tight reveals instead of revisiting machining. All hinges are self-closing design, pulling doors to the frame in a repeatable way across a run. For projects using cabinet doors up to 3/4 inch thick and a 2.5 mm cup edge drilling distance, this Salice CSR3C99NR hinge offers a concealed, adjustable hardware option ready for production or serious shop work.
Sold In: 1 Each