Salice Excentra S face frame hinge is a concealed cabinet hinge designed for face frame cabinets, so doors close cleanly while the hardware stays hidden. This hinge is part of the Salice Series S face frame hinges, which are stated to provide perfect closing to any kind of door, helping installers deliver consistent cabinet alignment. A 1-3/8 inch overlay design lets this hinge position the door over the face frame for that specific overlay application. The hinge operates at 106 degrees, giving a workable opening angle for everyday cabinet access without overextending the door. This model is self-closing, so the hinge pulls the door shut at the end of travel, which reduces door bounce and leaves doors resting fully closed.
Salice 1-3/8 overlay hinge is designed for face frame cabinets where the door overlays the frame by 1-3/8 inch, so layout and boring can follow that stated overlay dimension. A cup depth of only 11 mm allows this hinge to be used on most door styles, which gives flexibility when working with thinner door profiles that cannot accept deeper cups. The hinge cup edge drilling distance of 2.5 mm provides a fixed boring reference from the door edge, supporting consistent positioning from door to door. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which covers common kitchen and bath door thicknesses and supports standard material selections.
Salice 106 degree face frame hinge belongs to the concealed face frame hinge class, so it is used where a hidden hinge look is required on face frame cabinets. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which matches typical residential cabinet doors used in kitchens, baths, and built-ins. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, meaning the door does not project into the cabinet opening when fully open, which helps when interior pull-outs or roll-outs need a clear opening. This specific model uses a 1-3/8 inch overlay, placing it in the group of overlays at or above 1/2 inch that benefit from that zero protrusion behavior. The self-closing design on all Excentra face frame hinges means the hinge actively draws doors shut, which is useful in high-use areas where doors should return to the closed position consistently.
Salice 3 cam adjustable hinge uses a three cam adjustment system that covers depth, lateral, and height ranges, so most alignment issues can be corrected at the hinge rather than at the door or frame. The cam depth adjustment from plus 2.8 mm to minus 0.5 mm lets installers move doors closer to or farther from the face frame, which helps when face frames are not perfectly planar. Lateral adjustment from plus 3.0 mm to minus 2 mm is described as providing the best side to side adjustment in the industry, giving enough travel to resolve butt door problems where two doors meet in the middle. Slotted screw hole height adjustment of plus or minus 2 mm offers a small but useful range for raising or lowering doors, reducing the need to reposition mounting plates for minor corrections. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing projects to add separate soft-close action while retaining the same hinge geometry.
This hinge uses a 1-3/8 inch overlay, so it positions the door to cover the face frame by that amount, which is important when laying out cabinet fronts and clearances.
This Salice Excentra face frame hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning with common kitchen and bath door constructions.
The hinge operates at 106 degrees, providing a usable opening angle that allows good access into the cabinet while keeping the door movement controlled.
The three cam system provides depth, lateral, and height adjustment ranges, so installers can fine tune reveals, correct butt door issues, and align doors without altering the cabinet.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing projects to add soft-close action using those dedicated components.
The cup depth is 11 mm, so the hinge can be used on most door styles, which is useful when working with thinner doors that cannot accept deeper cup drillings.
Salice CSP3C99NR hinge combines a 1-3/8 inch overlay, 106 degree opening, and three cam adjustment in a concealed face frame hinge, giving installers a workable balance of access and adjustability. The 11 mm cup depth and door capacity up to 3/4 inch thick support use on most standard cabinet doors. All steel one piece construction with nickel plating is designed to resist corrosion, supporting long-term service in finished cabinetry. When a concealed, self-closing face frame hinge with zero door protrusion at larger overlays is needed, this Salice Excentra S model offers a defined set of dimensions and adjustments to work from.
Sold In: 1 Each
