Salice Excentra S face frame hinge is a concealed cabinet hinge that provides perfect closing to any kind of door, so doors pull in consistently for a clean, face-frame-ready look. This Salice Excentra S face frame hinge is a self-closing design, so the hinge actively brings the door shut, which helps doors stay closed without relying on catches. The 106 degree opening angle lets doors swing wide enough for access while keeping movement controlled for typical cabinet applications. Being part of the Salice Series S face frame hinges means the hinge is engineered specifically for face-frame construction, so the geometry matches how professional shops build framed cabinets. As a concealed cabinet hinge, it sits inside the door and frame, so hardware stays hidden and the exterior of the cabinet remains uninterrupted.
This 3-cam adjustable hinge uses cam depth adjustment of plus 2.8 mm to minus 0.5 mm, so the door can move in and out relative to the face frame to flush doors and correct reveals. The cam lateral adjustment of plus 3.0 mm to minus 2 mm lets the door shift side to side, which is critical for aligning butt doors and dialing in consistent spacing along runs. A slotted screw hole height adjustment of plus or minus 2 mm allows vertical movement, so doors can be nudged up or down without reboring holes. The hinge is designed as a face frame hinge, so its mounting layout is tailored to frame construction, supporting repeatable alignment across multiple openings.
Salice Series S face frame hinges provide perfect closing to any kind of door, so they work across a range of residential or shop-built cabinet styles where consistent closing is important. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so typical kitchen, bath, and utility doors fit within the intended door thickness without special construction. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so they suit layouts that use larger overlays while keeping the door clear of interior hardware and organizers. A cup depth of only 11 mm allows this hinge to be used on most door styles, which is useful on doors with thinner profiles, decorative routing, or limited material for boring. As a concealed cabinet hinge in the concealed face frame hinges category, it is suited to visible furniture-grade installations where exposed hardware is not desired.
Excentra three cam adjustment hinges provide cam depth adjustment of plus 2.8 mm to minus 0.5 mm, cam lateral adjustment of plus 3.0 mm to minus 2 mm, and slotted screw hole height adjustment of plus or minus 2 mm, so installers can correct misalignment in three directions without reboring or replacing doors. This 3-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, giving extra lateral range when two doors meet over a shared opening. All steel one piece construction with nickel plating to resist corrosion gives a rigid hinge body with a protective finish, which is important for long-term use in typical cabinet environments. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so the hinge geometry is matched to those dampers when a soft-close solution is needed. All hinges are self-closing design, which helps doors seat fully against the frame so reveals stay as set after adjustment. The hinge sits within the concealed cabinet hinges product class, supporting clean cabinet faces that highlight door material and finish rather than exposed hinge hardware.
The hinge is a Salice Series S face frame hinge, so it is intended for cabinets built with a face frame where the hinge mounts to the frame rather than frameless sides.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, so standard residential cabinet door thicknesses fall within the intended range.
Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, which helps when larger overlays are used and interior hardware needs clear door clearance.
The Excentra three cam system provides depth, lateral, and height adjustment, allowing the door position to be tuned in all directions to correct gaps and alignment.
The hinge uses a cup depth of only 11 mm and a hinge cup edge drilling distance of 2.5 mm, so boring stays shallow and referenced close to the door edge.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so the hinge layout matches these devices when soft-close function is required.
The Salice CSR3699XR cabinet hinge combines 106 degree concealed operation, 3-cam adjustment, and face frame geometry, so it aligns well with professional cabinet construction. With capacity for doors up to 3/4 inch thick, shallow 11 mm cup depth, and zero door protrusion at 1/2 inch and greater overlay, it supports common residential cabinet layouts. All steel one piece construction with nickel plating to resist corrosion and a self-closing design round out a hinge built for repeatable results. Use this Salice Excentra S 2 cam self-close hinge when a face frame concealed hinge with precise adjustment and defined drilling references fits your next cabinet run.
Sold In: 1 Each
