Salice Excentra S 3 Cam Self-Close 5/8" Overlay Face-Frame Hinges Nickel, 106° Dowel - CSR3599XR

Salice Excentra Hinge For 5/8 Inch Overlay Doors

Salice Excentra S 3 cam face frame hinge is a concealed cabinet hinge designed for face-frame cabinets with 5/8 inch overlay doors, so it supports typical framed-kitchen layouts while keeping hardware hidden. This hinge opens 106 degrees, giving doors a wide swing that helps during access without over-rotating the door. The hinge uses a dowel mounting style, which creates a stable, repeatable connection in the door for consistent alignment over multiple installations. As a self-close hinge, it pulls the door shut, which helps cabinets stay closed without separate catches. Being part of the Salice Series S face frame hinges, it is designed to provide perfect closing to any kind of door within its stated thickness range. As a concealed face frame hinge in nickel finish, it fits applications where a clean exterior and protected hardware are important on completed cabinetry.

Practical Details That Support Cabinet Projects

• This 3-cam adjustable hinge provides side-to-side adjustment, so installers can fine-tune butt door gaps and resolve interference after the doors are hung.
• The all steel one piece construction gives a solid hinge body, which supports long-term stability of the door movement under normal cabinet use.
• Nickel plating on the hinge resists corrosion, so hinge function and appearance are supported in typical kitchen and bath environments.
• A cup depth of only 11 mm lets this hinge be used on most door styles, which helps when working with thinner panel constructions or existing door bores.
• Hinge cup edge drilling distance of 2.5 mm defines the boring layout, helping doors line up consistently across a run of cabinets.

Hinge Overlay, Range, And Adjustment In Use

Salice face frame hinge 5/8 overlay is specified for 5/8 inch overlay doors, so the door covers that amount of the face frame for a planned reveal. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which covers many standard residential cabinet doors. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm lets the door move in and out relative to the cabinet, which helps flush the door to neighboring fronts. Cam lateral adjustment from plus 3.0 mm to minus 2 mm shifts the door side-to-side, which is useful for centering reveals and solving butt door problems. Slotted screw hole height adjustment of plus or minus 2 mm allows small vertical moves, which helps align top and bottom edges across a bank of doors.

Using This Concealed Face Frame Hinge In Workflows

Where This Salice Excentra Hinge Performs Best

Salice Excentra concealed cabinet hinge belongs to the concealed face frame hinges category, so it is intended for framed cabinet constructions where the frame remains visible and the hardware is hidden. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, which allows the door to open without projecting into the cabinet opening, supporting scenarios like interior pull-out usage in the same opening. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it suits many stock and custom door builds within that thickness. All hinges are self-closing design, so they draw the door shut at the end of travel, which helps maintain consistent closing behavior across a kitchen or project. As part of the Salice Series S face frame hinges, this model provides perfect closing to any kind of door within the stated parameters, which is useful when mixing different door styles on the same job.

Adjustment Range That Supports Clean Results

This 3-cam adjustable cabinet hinge offers cam depth adjustment from plus 2.8 mm to minus 0.5 mm, letting installers set how far the door sits from the face frame for flush alignment across neighboring doors. Cam lateral adjustment from plus 3.0 mm to minus 2 mm provides generous side-to-side movement, which is valuable for resolving butt door problems where doors touch or bind. Slotted screw hole height adjustment of plus or minus 2 mm supports small vertical tweaks, so top reveals and bottom lines can be matched after doors are hung. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft-closing function can be added using those devices while the hinge supplies the main articulation. The all steel one piece construction with nickel plating supports this adjustment system by providing a sturdy, corrosion-resistant platform that holds settings during typical cabinet use.

Common Salice Series S Excentra Hinge Questions

Selecting This Hinge For Face Frame Projects

Salice face frame hinge 5/8 overlay combines concealed mounting, 106 degree opening, and a 3-cam adjustment system, so it supports precise alignment on framed cabinets with 5/8 inch overlay doors. The all steel one piece construction with nickel plating provides a robust, corrosion-resistant hinge body for normal cabinet environments. With an 11 mm cup depth, 2.5 mm cup edge drilling distance, and door thickness capacity up to 3/4 inch, it fits a wide range of door preparations. For projects using Salice Type U soft-close devices, this hinge supplies the core articulation while the device manages closing speed. Choose this model when a concealed, self-closing face frame hinge with generous adjustment and zero door protrusion at 1/2 inch and greater overlays is important to the layout.