Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge designed for face frame cabinets, so doors stay clean-lined while hardware stays hidden during daily use. The hinge is part of the Salice Series S face frame hinges, which are described as providing perfect closing to any kind of door, so installers can use one hinge family across mixed door runs. This hinge is specified for a 3/4 inch overlay, so it positions the door to overlap the face frame by that amount, which is common in kitchen and bath layouts. A 106 degree opening angle lets the door swing wide enough for access while staying within normal cabinet clearances. The hinge operates as a self-closing design, so doors are pulled shut at the end of travel, helping doors stay closed without separate catches. As a concealed cabinet hinge, it supports a clean front appearance on finished jobs.
This Salice Excentra S face frame hinge is described as a screw-on style, so it mounts to the cabinet with screws through the hinge, supporting straightforward installation on face frame rails. The hinge is designed for 3/4 inch overlay doors, so layout and boring can be planned around that overlay dimension when designing the cabinet fronts. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it covers most standard residential door thicknesses without special components. Being a concealed face frame hinge, it fits the hinge cup into a bored hole in the door while the frame side mounts to the face frame, which simplifies alignment on traditional framed cabinets. The 106 degree opening angle also supports normal access without overextending into neighboring cabinets.
This product is categorized as a concealed face frame hinge in the concealed cabinet hinges class, so it is suited to framed cabinet construction where hidden hardware is preferred. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it can be applied on many kitchen, bath, and utility doors that use that standard thickness. With a 3/4 inch overlay rating, the hinge supports layouts where the door overlaps the face frame significantly, which is typical for full-look face frame assemblies. The specified 106 degree opening angle lets doors open wide for access to the cabinet interior while still working within installations where doors are near walls or appliances. The nickel finish on the hinge, provided by nickel plating, offers resistance to corrosion, which helps the hinge maintain appearance and function in normal indoor cabinet environments. The product is identified by manufacturer part number CSP3499XR, which can help match specifications or reorder the same hinge across multiple jobs.
The hinge is described as a 3-cam adjustable hinge, providing depth, lateral, and height adjustments through cam and slotted features, so alignment can be dialed in at the hinge without planing doors. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm allows the door to move closer to or away from the cabinet, which helps balance overlays and keep doors flush across a bank. Cam lateral adjustment from plus 3.0 mm to minus 2 mm lets the door shift side to side, which is particularly important for resolving butt door problems where doors meet along a vertical joint. Slotted screw hole height adjustment of plus or minus 2 mm allows minor up-and-down movement, which is useful when aligning door tops under a crown or along the bottom line over a toe kick. The hinge is described as self-closing, so the mechanism pulls the door shut at the end of travel, which helps doors stay fully closed and reduces the chance of partially open doors in daily use. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft-close dampers can be added in the system for controlled closing action. The hinge construction is listed as all steel one piece construction with nickel plating, which supports strength at the hinge points while resisting corrosion over the life of the cabinet.
The Salice Excentra S face frame hinge is designed for face frame cabinets, so it mounts to the face frame while the cup sits concealed in the door.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, allowing it to cover many standard residential cabinet door builds.
The hinge has a 106 degree opening angle, giving ample access into the cabinet while keeping motion within typical kitchen and bath layouts.
This Salice Excentra S hinge is specified for 3/4 inch overlay doors, so it positions the door to overlap the face frame by that dimension.
The hinge offers cam depth adjustment, cam lateral adjustment, and slotted screw hole height adjustment, so installers can fine-tune door position in three directions.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing soft-close functionality to be added within the same hinge system.
The Salice Excentra S face frame hinge with 3/4 inch overlay and 106 degree opening brings concealed hardware, self-closing action, and three-directional cam adjustment to framed cabinets, so alignment and door motion can be controlled precisely. Its all steel one piece construction with nickel plating provides strength and corrosion resistance, supporting long-term cabinet performance. The hinge is designed to work with doors up to 3/4 inch thick and can integrate with Salice Type U soft-close devices, so it suits many residential cabinet projects. For projects built around face frame construction where precise overlay and fine adjustment matter, this Salice CSP3499XR hinge offers a consistent solution.
Sold In: 1 Each
