Salice Excentra S face frame hinge is a concealed cabinet hinge designed for 1-1/4 inch overlay face-frame doors, giving a clean exterior line while keeping the hardware hidden in use. The hinge provides perfect closing to any kind of door, so doors return consistently to the same position. All hinges are self-closing design, which pulls the door shut for a controlled close on everyday cabinet use. A 106 degree opening angle allows wide access into the cabinet while keeping the door movement within a practical swing range. The hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning directly with common face-frame construction. The hinge cup edge drilling distance is 2.5 mm, so the cup layout follows a repeatable drilling reference on the door. A cup depth of only 11 mm allows this hinge to be used on most door styles without over-boring into thinner door profiles.
This Salice Excentra 3 cam hinge uses a screw-on fixing method, so the hinge mounts securely to the door and face frame using screws through the slotted and standard holes. The 3-cam adjustable hinge layout separates depth, lateral, and height adjustments, allowing each movement to be dialed in independently after mounting. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm shifts the door closer or farther from the face frame, which helps straighten doors that appear twisted against the cabinet. Cam lateral adjustment from plus 3.0 mm to minus 2 mm moves the door side to side relative to the frame edge, making it easier to correct rubbing doors. Slotted screw hole height adjustment of plus or minus 2 mm moves the door up or down, helping align rails and match reveals across a bank of cabinets.
This Salice self close face frame hinge is designed for 1-1/4 inch overlay on face-frame cabinets, so the door overlays the frame by that amount while the hinge stays concealed inside. The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common kitchen, bath, and casework door construction. A cup depth of only 11 mm means the hinge cup bore stays relatively shallow, which helps when working with thinner door profiles or routed panels. The hinge cup edge drilling distance of 2.5 mm gives a precise reference from the edge of the door, supporting consistent boring on multi-door runs. A 106 degree opening angle offers wide access inside the cabinet for everyday use while controlling the swing so adjacent doors or walls are easier to plan around. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, letting the open door sit fully outside the cabinet interior for better clearance of interior fixtures.
The 3-cam adjustable hinge provides the best side to side adjustment in the industry, which directly helps resolve butt door problems where meeting doors bind or gap unevenly. Cam lateral adjustment from plus 3.0 mm to minus 2 mm delivers generous side-to-side travel, so gaps between doors and face frames can be tuned without shifting the case. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm lets the door move closer or farther from the cabinet, helping correct doors that appear proud or recessed relative to neighboring fronts. Slotted screw hole height adjustment of plus or minus 2 mm adds vertical movement, which is useful for aligning top rails and bottom edges after all doors are hung. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, giving the option to pair this self-closing hinge with a separate soft-close device when a softer close is desired. All hinges are self-closing design, so even without added devices the hinge draws the door shut into the correct final position. The all steel one piece construction with nickel plating resists corrosion, supporting repeatable motion and cam function over long service life. Salice Series S face frame hinges provide perfect closing to any kind of door, giving consistent closure across mixed door sizes on the same job. A lifetime warranty on the hinge supports long-term use in demanding cabinet installations.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching typical kitchen and bath door construction for straightforward layout.
The 106 degree opening angle allows the door to swing wide for access, while keeping movement controlled for planning against walls or adjacent cabinets.
The 3-cam adjustable hinge offers cam lateral, depth, and height adjustments, so butt door problems like rubbing or uneven gaps can be corrected at the hinge.
This hinge is designed for 1-1/4 inch overlay, and Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion for better interior clearance.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing a self-closing hinge to be paired with separate soft-close control.
The hinge has all steel one piece construction with nickel plating, which resists corrosion and supports long-term function in typical cabinet environments.
Choose the Salice Excentra S face frame hinge when a 1-1/4 inch overlay concealed hinge with extensive cam adjustment is needed for face-frame cabinets. The hinge combines a 106 degree opening angle, self-closing design, and zero door protrusion on overlays of 1/2 inch and greater. The 11 mm cup depth and 2.5 mm cup edge drilling distance support consistent boring across multiple doors. All steel one piece construction with nickel plating and a lifetime warranty deliver a hinge built for long-term cabinet use.
Sold In: 1 Each
