Salice Excentra S face frame hinge is a concealed cabinet hinge designed for face frame construction, so doors sit correctly while hardware stays hidden during daily use. This hinge has self-closing design, so doors pull themselves shut at the end of travel, which helps reduce door bounce and improves day-to-day cabinet function. The hinge opens to 106 degrees, giving good access into the cabinet without over-swing that can stress adjacent doors or frames. It provides 1-5/16 inch overlay on the face frame, so the door covers that amount of frame and creates a consistent reveal when used with matching layouts. A cup depth of only 11 mm allows this hinge to be used on most door styles, which helps when working with thinner or profiled doors where deeper cups would be risky. The concealed face frame design keeps hardware out of sight, supporting a clean, finished cabinet appearance.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it matches common kitchen, bath, and built-in cabinet door stock without special construction. A cup depth of only 11 mm allows this hinge to be used on most door styles, which simplifies retrofits where existing doors cannot accept deeper cups. Hinge cup edge drilling distance is 2.5 mm, providing a predictable layout point for production boring or jig-based drilling in the shop or on site. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so you can pair this hinge with the matching soft-close solution when a damped closing action is desired. The 106 degree opening angle supports normal cabinet access while keeping hinge motion controlled around neighboring cabinets, trim, and appliances.
Salice Excentra S face frame hinge is part of the Salice Series S face frame hinges, which provide perfect closing to any kind of door by combining self-closing action with precise cam adjustments. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it fits standard residential and light commercial cabinet doors in kitchens, bathrooms, and storage built-ins that use typical panel stock. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so cabinets with face frames and interior pull-outs benefit from doors that open without projecting into the cabinet cavity. The 1-5/16 inch overlay allows this hinge to be used where a larger overlay is needed across the face frame, which helps cover wider frames or achieve a particular reveal pattern in multi-cabinet runs.
This 3-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, so banks of doors can be tuned after installation instead of rebuilding. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm lets you control how far the door sits from the frame, which is critical when lining up doors across a long run or dealing with slightly out-of-square cases. Cam lateral adjustment from plus 3.0 mm to minus 2 mm and slotted screw hole height adjustment of plus or minus 2 mm work together to give three-way adjustability, so installers can dial in gaps and reveals with standard tools. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion, which supports long service life in typical cabinet environments. All hinges are self-closing design, so doors are pulled into the closed position consistently, supporting clean alignment with adjacent fronts.
The Salice Excentra S face frame hinge is designed for face frame cabinets, so the hinge mounts to the frame while keeping the hardware concealed when the door is closed.
The hinge provides a 1-5/16 inch overlay, so the door covers that amount of the face frame and helps establish consistent reveals in overlay cabinet layouts.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common cabinet door construction so standard door stock can be used.
The 3-cam adjustable hinge provides depth, lateral, and height adjustment, so doors can be shifted in three directions to correct butt door problems and refine reveals without rebuilding.
On overlays of 1/2 inch and greater, zero door protrusion means the open door stays within the cabinet profile, which helps when using interior pull-outs or adjacent doors.
Salice Excentra face frame hinges have all steel one piece construction with nickel plating, which resists corrosion and supports long-term performance in cabinet environments.
Salice Excentra S face frame hinge offers 1-5/16 inch overlay, 106 degree opening, and three-way cam adjustment, so it supports precise alignment on face frame cabinets. The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common door stock. All hinges are self-closing design, so doors are pulled shut consistently for a finished look. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion, supporting long-term service in typical cabinet installations.
Sold In: 1 Each
