
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge that provides perfect closing to any kind of door, so you can deliver clean, modern face-frame installations without exposed hardware. This 3-cam adjustable hinge offers the best side to side adjustment in the industry, helping resolve butt door problems where reveals are tight or doors meet in the middle of a cabinet. A 106 degree opening angle lets doors swing wide enough for access while still controlling the door arc for typical kitchen and bath layouts. The hinge supports an overlay of 1-7/16 inch, so it suits projects calling for that specific overlay dimension on face-frame cabinets. All hinges use a self-closing design that pulls the door shut at the end of travel, which helps doors stay closed in everyday use. Salice Excentra face frame hinges are part of the Salice Excentra line, so they match other Excentra components in function and adjustment behavior.
The hinge uses a cup depth of only 11 mm, so it can be used on most door styles that may not have enough material for deeper cup drilling. A hinge cup edge drilling distance of 2.5 mm sets the relationship between the cup and the door edge, which simplifies layout when repeating the same door overlay across a project. Salice 106 degree self close hinge operation keeps the opening movement smooth while the self-closing feature completes the last part of the swing, which is important for consistent door position in daily use. Excentra face frame hinges with overlays of 1/2 inch and greater provide zero door protrusion, keeping the open door inside the cabinet width for drawer and rollout clearance. The hinge is designed to work with Salice Type U soft-close devices, so you can add soft-close performance while keeping the same hinge geometry and adjustments.
This concealed cabinet hinge belongs to the Salice Series S face frame hinges category, positioning it for face-frame cabinets that call for a clean exterior appearance. The hinge supports an overlay of 1-7/16 inch on cabinet doors up to 3/4 inch thick, making it suitable where that overlay dimension is part of the design or replacement requirement. A cup depth of only 11 mm allows this hinge to be used on most door styles, which is helpful on thinner or profiled doors where deeper boring could weaken the panel. The hinge cup edge drilling distance of 2.5 mm defines the drilling pattern, so once that pattern is set up, boring and installation can be repeated quickly across multiple doors. Excentra hinges with overlays of 1/2 inch and greater offer zero door protrusion, so doors do not extend past the cabinet side when open, which benefits installations with interior drawers or rollout shelves.
This 3-cam adjustable hinge provides the best side to side adjustment in the industry, which helps resolve butt door problems on cabinets where paired doors share a center reveal. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm lets you move the door closer to or farther from the face frame, which helps align the door plane when frames or doors vary slightly. Cam lateral adjustment from plus 3.0 mm to minus 2 mm supplies ample horizontal travel, allowing you to fine-tune reveals between doors and cabinet sides without re-drilling. Slotted screw hole height adjustment of plus or minus 2 mm adds vertical tuning, so door tops and bottoms line up cleanly across a bank of cabinets. All hinges are self-closing design, so once adjusted, the hinge action helps pull each door into the same closed position, reinforcing uniform gaps. Salice Excentra face frame hinges are designed to work with Salice Type U soft-close devices, keeping the same three-cam adjustments in play even when soft-close is added.
The Salice Excentra S face frame hinge is designed for face-frame cabinets, so the hardware mounts to the frame while the cup bores into the cabinet door.
This hinge is designed to work with cabinet doors up to 3/4 inch thick, matching the common thickness used in many kitchen and bath door constructions.
The hinge uses a cup depth of only 11 mm, so the boring depth is shallow enough for most door styles while still seating the cup securely.
The hinge cup edge drilling distance is 2.5 mm, which sets the cup position from the door edge and supports a consistent overlay layout.
The 3-cam system provides depth, lateral, and height adjustments, so you can correct butt door problems, adjust reveals, and align doors after the hinges are mounted.
Salice Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing soft-close operation while keeping the same hinge geometry.
This Salice 1-7/16 overlay hinge combines a 106 degree opening angle, self-closing function, and three cam adjustments, giving precise control over door position in face-frame cabinet work. All steel one piece construction with nickel plating resists corrosion, supporting long service life in typical residential and commercial cabinet spaces. A cup depth of only 11 mm and a 2.5 mm cup edge drilling distance streamline boring and layout, especially when repeating the same overlay across multiple doors. With design support for doors up to 3/4 inch thick and overlays of 1/2 inch and greater offering zero door protrusion, this hinge aligns well with many kitchen, bath, and built-in cabinet applications. Use this CSP3D99NR concealed cabinet hinge when a Salice Series S face frame solution with strong adjustment range and clean concealed appearance is required.
Sold In: 1 Each