Salice Excentra S face frame hinge is a concealed cabinet hinge from Salice America designed for face frame cabinets using an overlay door. The hinge provides perfect closing to any kind of door, which helps installers deliver consistent, even door alignment across a full run of cabinets. A self-closing design pulls the door shut once it is near the frame, reducing the need for magnetic catches on standard cabinet applications. The hinge offers a 106 degree opening angle, giving good access into the cabinet while still controlling the door swing in tight layouts. All steel one piece construction, combined with nickel plating to resist corrosion, creates a robust hinge body suited to long-term cabinet use. A lifetime warranty from the manufacturer supports long service expectations on new installations and replacements.
The hinge is part of the Salice Series S face frame hinges, so it is intended for cabinets built with a face frame construction rather than frameless boxes. Excentra face frame hinges are designed to work with cabinet doors up to 3/4 inch thick, which suits common kitchen and bath door materials. The hinge is specified as a 1-7/16 inch overlay model, so the door overlays the face frame by that dimension when properly installed. Hinge cup edge drilling distance is 2.5 mm, which sets the cup bore near the edge of the door and supports the listed overlay geometry. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so the open door does not project into the cabinet interior, which helps when sliding out trays or storage.
This Salice CSR3D99NR hinge is a concealed face frame hinge in the Salice Series S line, suited to face frame cabinets that require a 1-7/16 inch overlay and a 106 degree opening. Because it is designed to work with cabinet doors up to 3/4 inch thick, it matches common residential and light commercial cabinet door builds. A cup depth of only 11 mm means it can be used on most door styles, including doors where deep boring might weaken the panel. The hinge cup edge drilling distance of 2.5 mm ties the bore location to the stated overlay, helping achieve consistent reveals across multiple doors. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so installers can add soft-close functionality using the matching devices without changing the hinge layout.
The 3-cam adjustable hinge provides precise depth, lateral, and height tuning on the door, which supports quick field corrections after doors are hung. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm changes how far the door sits from the face frame, helping align door faces on runs of cabinets. Cam lateral adjustment from plus 3.0 mm to minus 2 mm lets the installer move the door side to side, which is especially useful to resolve butt door problems where paired doors touch or leave uneven gaps. Slotted screw hole height adjustment of plus or minus 2 mm shifts the door up or down on the frame side, allowing fast correction of misaligned top lines or bottom reveals. All steel one piece construction adds rigidity to the hinge body, supporting stable alignment under normal opening and closing cycles. Nickel plating to resist corrosion protects hinge surfaces, helping the mechanism operate smoothly in typical kitchen, bath, or shop cabinet environments. The self-closing design pulls doors shut from the last few degrees, contributing to consistent closing behavior across all doors on a project.
The hinge is part of Salice Series S face frame hinges, so it is intended for cabinets built with a face frame rather than frameless cabinet boxes.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning with common kitchen and bath door materials and simplifying door selection.
The hinge is specified as a 1-7/16 inch overlay model, so the mounted door overlaps the face frame by 1-7/16 inch when bored and positioned to the given drilling distance.
The hinge provides a 106 degree opening angle, giving good interior access while keeping the door swing controlled for typical cabinet installations.
The hinge offers cam depth, lateral, and slotted height adjustments, which let installers fine-tune door position after mounting to correct reveals and butt door contact.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing soft-close performance using the matching Salice components.
Choose the Salice Excentra S face frame hinge when a concealed hinge is needed for 1-7/16 inch overlay doors on face frame cabinets with doors up to 3/4 inch thick. The 3-cam adjustable design with depth, lateral, and height adjustment supports precise on-site tuning for clean reveals. All steel one piece construction with nickel plating to resist corrosion offers a solid hinge body for long-term cabinet projects. The self-closing feature and 106 degree opening angle add everyday practicality to kitchens, baths, and similar installations where consistent door action is important.
Sold In: 1 Each