
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge designed for face frame applications where a clean exterior is important. This hinge is part of the Salice Series S line, which is engineered to provide perfect closing to any kind of door, so doors return consistently to the same position. The hinge has a self-closing design, so the mechanism pulls the door shut at the end of travel, which keeps doors from sitting partially open. A 106 degree opening angle lets the door swing wide enough for comfortable cabinet access while still controlling the arc of the door in tight layouts. The hinge is designed for a 1-1/4 inch overlay on a face frame, so it sets the door position accurately relative to the frame edge. This hinge is built as a concealed solution, which keeps hardware hidden while the door is in use.
The hinge is designed as a face frame hinge, so it mounts to a framed cabinet construction rather than a frameless box. It uses a 1-1/4 inch overlay configuration, which positions the door to cover more of the face frame for a specific visual layout. A hinge cup edge drilling distance of 2.5 mm gives a reference from the door edge to the cup, helping drilling jigs and CNC programs place the cup consistently. Dowel mounting on the cup side provides a repeatable method of fixing the hinge to the door, which supports production workflows. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so standard kitchen or bath door constructions fall within its range.
This hinge is a concealed cabinet hinge in the Salice Series S family, so it is suited for installations where visible hardware on the cabinet face is not desired. As a face frame hinge, it matches cabinets built with a front frame, commonly used in many kitchen and bath layouts, which ties directly into typical North American cabinetry. The 1-1/4 inch overlay design means it works where doors are intended to overlap the frame significantly, which affects the reveal pattern across a bank of doors and drawers. Because the hinge is designed for doors up to 3/4 inch thick, it fits common panel and five-piece door constructions, which keeps door material selection flexible within that thickness. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so installers can add a compatible soft-close component to control closing speed. All hinges in this line are self-closing, so the spring action draws doors shut at the end, helping doors seat fully against the frame.
The hinge uses a three cam adjustment design, which means depth, lateral, and height adjustments are built into the hardware to fine-tune the door position. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm changes how far the door sits from the face frame, allowing clearances around the door to be set precisely. Lateral cam adjustment from plus 3.0 mm to minus 2 mm shifts the door side to side on the opening, which is useful for correcting butt door problems where two doors meet at the center. Slotted screw hole height adjustment of plus or minus 2 mm permits small vertical moves, so the top and bottom edges of multiple doors can be lined up cleanly. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so on suitable overlays the open door does not project past the cabinet side, which can help when pulling out interior roll-outs or drawers. A 106 degree opening angle offers enough swing for access while helping the door stay within a predictable arc, which is helpful in tight runs or near walls. The all steel one-piece nickel plated construction supports durability of the cams and moving parts, so repeated adjustments remain effective over time.
The hinge is a face frame hinge, so it is made for cabinets that use a front frame rather than frameless box construction.
The hinge is designed for a 1-1/4 inch overlay, setting the door to cover that amount of the cabinet face frame on the hinged side.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, fitting common kitchen and bath door constructions.
The three cam adjustments allow depth, lateral, and height tuning, so the door position can be refined without redrilling hinge locations.
Zero door protrusion means that on overlays of 1/2 inch or more, the fully opened door does not extend past the cabinet side line.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing controlled closing when those devices are used.
The Salice CSR3A99NR hinge combines a 1-1/4 inch overlay design with 106 degree opening, so it serves many face frame cabinet layouts. Its three cam adjustments, 11 mm cup depth, and design for doors up to 3/4 inch thick give installers control over alignment on real jobs. The all steel one-piece nickel plated construction and self-closing function support long-term door performance in everyday cabinet use. For projects needing concealed hinges with precise adjustment on face frame cabinets, this Salice Excentra S face frame hinge offers a focused solution.
Sold In: 1 Each