Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S 3 cam self close hinge is a concealed face frame hinge from Salice America designed for 9/16 inch overlay cabinet doors. This hinge is part of the Salice Series S face frame hinges, so it is built specifically to provide perfect closing to any kind of door in a face frame application. The hinge offers a 106 degree opening angle, giving doors a wide, practical swing for everyday cabinet access. All hinges are self-closing design, so the door is pulled shut at the end of travel, which keeps doors consistently closed without relying on magnetic catches. This hinge is designed to work with cabinet doors up to 3/4 inch thick, covering the common range of framed kitchen and bath doors. The product belongs to the concealed cabinet hinges class, so it stays out of sight when the door is closed, giving a clean, finished look on face frame installations.
The hinge is described as screw-on, so it is intended to be fastened to the cabinet and door with screws during installation, which suits typical shop tools and methods. The cup depth of only 11 mm allows this hinge to be used on most door styles, so even thinner or profiled doors have enough material left after boring. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, meaning the open door does not project into the interior opening, which helps when using interior pull-outs or drawers. The hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning with standard framed cabinet construction. Hinge cup edge drilling distance of 2.5 mm gives a specific boring reference from the edge, so repeat drilling patterns can be set up on line borers or jigs for consistent fit.
The hinge is a concealed face frame hinge in the Salice Series S line, so it is aimed at framed cabinet construction where a hidden hinge is preferred. A 9/16 inch overlay Face-Frame configuration means the door overlays the face frame by roughly that amount, which matches many standard overlay layouts in kitchen, bath, and utility cabinets. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it suits common rail-and-stile or slab doors in residential and light commercial shops. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so they can be paired with those devices when a soft-close action is desired in the same opening. All hinges are self-closing design, so doors are drawn shut for a consistent finished appearance in runs of upper or base cabinets.
This 3-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, which is especially useful on long runs where small drilling variations can compound into visible misalignment. Excentra, three cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, allowing the door to be moved toward or away from the cabinet box to flush up faces or balance reveal lines after hanging. Cam lateral adjustment from plus 3.0 mm to minus 2 mm shifts the door left or right without re-drilling, so gaps between doors and end panels can be dialed in quickly during install or service work. Slotted screw hole height adjustment of plus or minus 2 mm lets the door move up or down slightly, helping align top edges and bottom rails across multiple openings. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, which keeps the open door from blocking roll-out trays or interior organizers, improving day-to-day cabinet function. All steel one piece construction with nickel plating to resist corrosion gives the hinge a solid body and a protective finish suited to typical kitchen, bath, and shop environments. The hinge has a lifetime warranty, which signals that it is built for long-term performance in repeated open-close cycles on frequently used cabinets.
The hinge is a Salice Series S face frame hinge, so it is intended for framed cabinet construction where the door overlays the face frame.
The product is described as a 9/16 inch overlay face frame hinge, so it is suited to doors that overlay the face frame by approximately 9/16 inch.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, which covers most standard residential cabinet door builds.
The hinge provides a 106 degree opening angle, giving a wide swing that helps access cabinet interiors during daily use.
The Excentra hinge offers cam depth, cam lateral, and slotted screw hole height adjustment, allowing in-out, side-to-side, and vertical fine tuning of the mounted door.
Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so open doors do not project into the opening where pull-outs travel.
The Salice CSP3699XR concealed cabinet hinge combines a 9/16 inch overlay face frame configuration with a 3-cam adjustable design, so it supports precise alignment on framed cabinets. All steel one piece construction with nickel plating to resist corrosion offers a robust hinge body ready for kitchen, bath, or shop environments. With a 106 degree opening angle, self-closing action, and compatibility with Salice Type U soft-close devices, this hinge suits both standard and upgraded cabinet projects. Select this Salice Series S hinge when a concealed, highly adjustable face frame solution is needed for doors up to 3/4 inch thick.
Sold In: 1 Each
