Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Salice Excentra S face frame hinge is a concealed cabinet hinge from Salice America designed for 1 inch overlay face-frame doors, so it lets you build full overlay face-frame cabinets while keeping the hardware hidden. This Salice CSP3299NR hinge offers 106 degree opening, which gives doors a wide swing while keeping movement controlled around adjacent cabinets. The hinge is a self-closing design, so doors are pulled shut at the end of travel for consistent closing on every use. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so you can pair this hinge with those devices when you need soft-closing action. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which covers common kitchen and bath door constructions. A cup depth of only 11 mm allows this hinge to be used on most door styles, so you can run thinner profiles without changing your boring setup.
A cup depth of only 11 mm allows this hinge to be used on most door styles, which simplifies boring because you can stay shallow in thinner or profiled doors. The hinge cup edge drilling distance is 2.5 mm, giving a defined reference for consistent machining across a run of parts. Excentra, three cam adjustment hinges provide cam depth, lateral, and height adjustment ranges, so once the cups and plates are set you can bring every door into alignment using only the cams and slotted holes. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which matches common stock thickness and keeps the boring pattern compatible across multiple cabinet lines.
Salice 1 inch overlay hinge geometry matches face frame cabinets that need a full 1 inch overlay on the frame, so it is well-suited to overlay kitchen, vanity, and built-in doors. The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it works with many standard panel constructions without changing cup tooling. A cup depth of only 11 mm allows this hinge to be used on most door styles, which is useful when you are dealing with thinner rails or routed profiles that do not allow deep boring. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so when used on these overlays the door does not project into the opening and the interior can be planned around pull-outs or organizers without interference from the open door.
This 3-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, so even when frames or doors vary slightly you can recover clean margins without rebuilding parts. Excentra, three cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, which helps pull doors tighter to the case or relieve contact when paint or edge build-up changes the fit. Their cam lateral adjustment from plus 3.0 mm to minus 2 mm allows easy tuning of double doors meeting at a stile, which reduces the time spent trimming edges. The slotted screw hole height adjustment of plus or minus 2 mm lets you shift doors up or down to track continuous lines across a bank of cabinets, helping finished runs look intentional even when the rough cabinetry is slightly off. The self-closing design pulls doors tight at the end of travel, which supports consistent reveals and helps keep doors resting firmly against the face frame each time they are used.
Salice Excentra S face frame hinge is for face-frame cabinets with 1 inch overlay doors, so it supports concealed mounting on overlay kitchen, bath, or built-in cabinet frames.
The hinge provides 106 degree opening, which lets the door swing wide enough for normal cabinet access while controlling clearance around adjacent doors and walls.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, so it matches common cabinet door constructions without changing to a different cup system.
The hinge provides cam depth from plus 2.8 mm to minus 0.5 mm, lateral from plus 3.0 mm to minus 2 mm, and height plus or minus 2 mm, giving generous post-install tuning.
The 11 mm cup depth allows this hinge to be used on most door styles, so thinner or profiled doors can be bored without breaking through the face or weakening the panel.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft-closing action can be added where those devices are specified in a project.
Salice Excentra S face frame hinge brings a 1 inch overlay fit, 106 degree opening, and self-closing action together in a concealed cabinet hinge, so it suits many overlay face-frame runs. With 3-cam adjustment across depth, lateral, and height, it supports quick field tuning when frames or doors vary. When a job calls for a concealed face frame hinge with zero door protrusion on 1/2 inch and greater overlays, this CSP3299NR model gives a defined geometry and adjustment range for repeatable cabinet installations.
Sold In: 1 Each
