Omega National S95 Series 10"Wx19-1/2"Dx2"H Birch Spice Drawer Insert, -S9510DNL1
Description
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSDI1910 to RSSDI1910.
Omega National S95 Spice Drawer Insert For Jars
Omega National S95 spice drawer insert is a birch spice drawer insert built for organizing spice jars directly in a drawer. The 10 inch width fits drawer layouts that match this span, so spices line up without wasting side-to-side space in the cabinet run. The 19-1/2 inch depth matches common drawer box depths, so the insert uses the full front-to-back space for rows of jars. The 2 inch height keeps the insert low in the drawer, so jars rest on its surfaces while staying below typical drawer sides for a clean fit. Three 33 degree angled surfaces hold spice jars at a steady slant, so labels stay visible when the drawer is open. Construction from Baltic Birch plywood with a durable UV coating provides a smooth surface under jars that stands up to repeated use in a working kitchen or shop installation.
Key Birch Spice Drawer Insert Details For Use
- The 10 inch wide layout focuses storage into a defined footprint, so installers can dedicate a specific drawer to spices without reworking wider box dimensions.
- The 19-1/2 inch deep design extends storage across the full length of typical drawer boxes, so each angled surface can support multiple jars in a single pull-out motion.
- The 2 inch overall height keeps the insert shallow, so it sits inside many standard-height drawers while still raising jars onto the angled planes for easier label viewing.
- Three 33 degree angled surfaces hold spice jars at a consistent tilt, so jars resist rolling while the drawer opens and closes and labels remain readable from above.
- Baltic Birch plywood construction with a durable UV coating creates a hard, smooth surface, so jars slide into position easily and the insert surface handles ongoing kitchen cabinet use.
Spice Drawer Insert Fit And Layout Basics
This spice drawer insert uses its 10 inch width and 19-1/2 inch depth to define where it fits within a drawer, so planners can dimension drawer boxes and fronts around a known footprint. The 2 inch height limits the profile inside the drawer, so the insert rests over the drawer bottom while leaving surrounding space for drawer sides or rails. The three 33 degree angled surfaces create stepped rows inside that footprint, so each row of jars presents at a readable angle when the drawer opens. Baltic Birch plywood with a durable UV coating supplies a rigid base, so the insert holds its shape across the full depth and supports jars along each angled run.
Using This Spice Tray Insert In Cabinet Projects
Where This Baltic Birch Spice Drawer Insert Fits
This Baltic Birch spice drawer insert fits cabinet projects centered around a 10 inch wide spice drawer, so it suits layouts that reserve a narrow drawer near cooking areas. The 19-1/2 inch depth works with drawer boxes that run nearly the full depth of the cabinet, so the insert spans from front to back instead of stopping short. With a 2 inch height, the insert occupies low vertical space in the drawer, so it lies over the drawer bottom while remaining clear of many drawer sides. The three 33 degree angled surfaces divide this footprint into stepped rows, so spices can be arranged by type or frequency of use across the rows for faster selection. Baltic Birch plywood with durable UV coating forms a stable platform, so the insert supports repeat loading and unloading in active kitchen or shop environments.
Why These Angled Surfaces Support Consistent Results
The three 33 degree angled surfaces in this spice tray insert set a fixed angle for each jar, so labels face upward at a repeatable tilt every time the drawer is opened. That tilt resists jar rolling, so jars stay seated on each plane when the drawer moves in and out. The 10 inch width and 19-1/2 inch depth hold these angled surfaces in a defined rectangle, so installers can standardize drawer layouts that repeat across multiple cabinets. The 2 inch height keeps the angled tiers low while still lifting jars off the flat drawer bottom, so jars are easier to see without changing the drawer front height. Baltic Birch plywood with durable UV coating keeps the surfaces rigid and smooth, so jars slide into their positions and remain supported along the full length of each angled row.
Common Questions About This Spice Drawer Insert
What are the overall dimensions of the S9510DNL1 insert?
The S9510DNL1 spice tray insert measures 10 inches wide, 19-1/2 inches deep, and 2 inches high, so it is sized for narrow, full-depth spice drawers in kitchen cabinets.
How are spice jars positioned on this drawer insert?
This spice drawer insert uses three 33 degree angled surfaces to hold spice jars, so jars rest at a slant that keeps labels visible from above when the drawer is open.
What material is this Omega National spice tray made from?
The spice tray insert is produced from Baltic Birch plywood with a durable UV coating, so the surfaces are rigid and smooth for repeated jar movement.
How tall is the spice drawer insert inside the drawer?
The spice tray insert is 2 inches tall, so it sits low in the drawer while elevating jars onto the angled surfaces for easier viewing.
How does the 10 inch width affect drawer planning?
The 10 inch width defines a narrow spice drawer layout, so designers can allocate a specific drawer to spices without changing wider cabinet sections.
What does the part number S9510DNL1 represent?
The part number S9510DNL1 identifies this Omega National S95 Series 10 inch by 19-1/2 inch by 2 inch Birch spice drawer insert for ordering and project documentation.
Select This Spice Tray Insert For Defined Fit
Choosing this Omega National S95 spice drawer insert sets a clear 10 inch by 19-1/2 inch by 2 inch footprint for spice storage, so cabinet layouts can reserve a precise drawer for jars. The three 33 degree angled Baltic Birch surfaces with durable UV coating hold jars at a stable tilt, so labels stay readable during everyday drawer use. Using the S9510DNL1 part number ties design notes and orders to this specific birch spice tray insert, so projects keep the same drawer configuration from planning through installation.
