
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
1/2 inch unfinished oak wood screw hole plug describes a wood fastener designed to fill exposed screw holes in woodworking projects where oak is the visible material. The plug diameter of 1/2 inch matches 1/2 inch counterbored holes, so the plug seats properly and levels with the surrounding surface when trimmed. The unfinished oak construction lets the installer sand and finish the plug along with the rest of the oak workpiece, which helps the repair visually blend into doors, face frames, trim, or panels. The product is identified as Smith Wood Products, Ltd. 1/2 inch Unfinished Oak Wood Screw Hole Plug, OB0500, which ties directly to manufacturer part OB0500 for consistent reorders on repeat jobs. Being part of the Screw Cover Caps and Washers class places it within the fastener finishing step of a woodworking workflow, where covering fastener heads matters for appearance.
The SAP description "SCREWHOLE BUTTON,1/2'OAK" confirms that this piece is sized as a 1/2 inch oak screw hole button, so boring or counterboring to that diameter creates the intended interference for the plug. Because the category is Fasteners|Screw Covercaps & Washers, the plug is meant to follow screw installation as the finishing step, so drilling depth and hole sizing can be planned ahead in the workflow. The unfinished oak surface allows the plug to be trimmed flush and then sanded with the surrounding material, which supports tight visual alignment between the plug and adjacent grain. Using the named 1/2 inch size across workpieces helps installers standardize drill tooling and layout for repeating hole locations.
The brand Smith Wood Products, Ltd. and the classification as Screw Cover Caps and Washers place this 1/2 inch unfinished oak screw hole plug in applications where exposed fasteners sit in oak components. In cabinet or woodworking jobs that use oak, the 1/2 inch plug diameter matches holes bored to the same size, so the plug can be driven or pressed into position after screws are set. The reference to plug diameters of 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch shows that this 1/2 inch model is part of a size system, which is useful when different framing members or panels need different hole diameters while keeping a similar oak plug appearance. Within Wurth Baer Supply's broader fastener offering, this plug integrates into workflows where installers first anchor components using screws and then conceal those fasteners in visible oak surfaces.
The product name explicitly states "unfinished oak", which means the plug surface is ready to be worked along with the rest of the oak assembly, so sanding and finishing can occur in the same passes. This unfinished state allows stain or clear coat to be applied across both plug and surrounding oak, which helps color and sheen track closely between components. The 1/2 inch diameter specification gives installers a clear target when selecting drill bits or boring equipment, which reduces rework from mis-sized holes during layout. Being part of the Screw Cover Caps and Washers class reinforces that this plug belongs to the final detailing phase after screw installation, so crews can plan hole spacing and plug orientation as part of their standard fastening sequence. The manufacturer part number OB0500 provides a repeatable identifier, so when a shop dials in its process around 1/2 inch oak plugs, reordering the exact same part supports consistent appearance across jobs.
The OB0500 oak screw hole plug has a 1/2 inch plug diameter, so it is sized for screw holes or counterbores drilled at 1/2 inch where an oak plug is desired.
The OB0500 plug is described as an unfinished oak wood screw hole plug, so it is made from oak and arrives ready for sanding and finishing on site.
The plug is specified as unfinished oak, allowing it to be sanded and finished with the surrounding oak surface so stain or clear coat can be applied in one sequence.
The OB0500 part is categorized as a Screw Cover Caps and Washers fastener, so it is used after screws are driven to conceal screw holes in oak components.
The manufacturer part number OB0500 identifies the 1/2 inch unfinished oak wood screw hole plug from Smith Wood Products, Ltd., which supports consistent reordering for repeat work.
The web description notes plug diameters of 3/8, 1/2, 3/4, and 1 inch, so this OB0500 plug is the 1/2 inch option within that oak plug size range.
The Smith Wood Products, Ltd. 1/2 inch unfinished oak wood screw hole plug, part OB0500, gives installers a defined oak solution for covering 1/2 inch screw holes in visible work. The fastener classification as Screw Cover Caps and Washers signals its role in the finishing stage of cabinet and woodworking projects. Using this identified 1/2 inch oak plug lets shops and field crews align drilling, fastening, and finishing steps around a repeatable component. For projects built from oak where exposed screw holes need to be hidden with matching wood, selecting the OB0500 plug from Wurth Baer Supply ties installation details directly to a specific, reorderable part.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each | SB38B-O Mfr# OB0375 | Smith Wood Products, Ltd. 3/8" Unfinished Oak Wood Screw Hole Plug, OB0375 - 1000/Box | ||||
Sold in: 250 Each | SB38B-B-L5 Mfr# SB38B-B | Smith Wood Products, Ltd. 3/8" Unfinished Maple Wood Screw Hole Plug, SB38B-B - 500/Box | ||||
Sold in: 1000 Each | SB38B-B Mfr# BB0375 | Smith Wood Products, Ltd. 3/8" Unfinished Birch Wood Screw Hole Plug, BB0375 - 1000/Box | ||||
Sold in: 100 Each | SB34B-B-C Mfr# BB0750 | Smith Wood Products, Ltd. 3/4" Unfinished Birch Wood Screw Hole Plug, BB0750 - 100/Box | ||||
Sold in: 250 Each | SB12B-O-L5 Mfr# SB12B-O | Smith Wood Products, Ltd. 1/2" Unfinished Oak Wood Screw Hole Plug, SB12B-O - 500/Box |