Smith Wood Products, Ltd. 3/8" Unfinished Oak Wood Screw Hole Plug, OB0375 - 1000/Box

3/8 Inch Oak Screw Hole Plug For Clean Finishes

3/8 inch oak screw hole plug from Smith Wood Products, Ltd. fills a drilled 3/8 inch screw hole with matching wood so the fastener is hidden and the surface reads as solid lumber. The plug is made from oak, so it visually ties into oak projects where exposed metal would distract from the grain. Because the plug is a dedicated screw hole button, it is shaped to occupy the bore created for common 3/8 inch fasteners and similar joinery details. The unfinished oak surface accepts shop-applied stains or clear coats, allowing the plug to be finished with the rest of the workpiece in one run. This product is sold in full box quantities, giving shops and serious DIY users enough plugs on hand for runs of cabinets, fixtures, or trim jobs without stopping mid-project.

Key Oak Screw Hole Plug Details For Shops

• The screw hole plug diameter of 3/8 inch is sized to match 3/8 inch bores, so it fills the opening and hides the screw head in cabinet, furniture, or millwork applications.
• The plug is made of oak wood, so it visually coordinates with oak components and lets the repair or fastener point blend into surrounding rails, stiles, or panels.
• The plug is unfinished, so stains, dyes, or clear topcoats can be applied on site, helping the plug take on the same color schedule as the rest of the assembly.
• The product is described as a screw hole button, so it is intended specifically for covering fastener holes rather than acting as a structural dowel in a joint.
• The item is sold in full box quantities only, so production environments can plan repetitive work where every screw location receives a matching wood plug.

Installation Use Of The 3/8 Inch Screw Hole Plug

The 3/8 inch screw hole plug diameter aligns with a 3/8 inch drilled opening, so the installer bores a consistent hole size wherever a fastener needs to be concealed. Because the plug is an unfinished oak component, it can be set after fastening and then finished in the same sanding and coating sequence as the surrounding material. The product sits within the broader category of screw cover caps and washers, so its role is to visually finish the fastener location rather than alter the structural capacity of the joint. Sold in full box quantities, it supports workflows where identical holes and plugs repeat across banks of doors, face frames, or trim pieces on a job.

Using Oak Screw Hole Buttons In Wood Projects

Where This Oak Wood Screw Plug Performs Best

This screw hole plug from Smith Wood Products, Ltd. is part of the screw cover caps and washers class, so it belongs wherever fasteners in wood need a finished appearance rather than a visible head. The 3/8 inch plug diameter corresponds to commonly used 3/8 inch bores, making it suited to projects where a uniform drill size is practical across a run of cabinets or fixtures. Because the plug material is oak, it aligns especially well with oak cabinets, furniture frames, or architectural trim where a consistent species appearance matters. In those settings, switching from an exposed screw to a wood plug improves the overall presentation without changing the underlying fastening approach. The OB0375 designation identifies this specific 3/8 inch oak version within the Smith Wood Products, Ltd. line, helping shops repeat the same look job to job.

Why Unfinished Oak And Diameter Support Consistency

The unfinished surface of this oak screw hole plug allows stain or clear finish to be applied after installation, so the plug can be blended into the final color schedule instead of relying on a prefinished tone. This matters on oak projects where color matching across rails, panels, and face frames is controlled in-house. The 3/8 inch diameter specification, reflected in the SAP description as a 3/8 inch oak screw hole button, supports repeatable drilling and plugging because every hole is prepared to the same size. Being categorized as a fastener-related item within screw cover caps and washers, the plug focuses on appearance at the fastener point, which simplifies planning: the structural screw choice remains unchanged while the plug handles the visual result. Sold by Wurth Baer Supply in full box quantities, it supports repeat workflows for woodworking professionals.

Common Questions About The 3/8 Inch Oak Plug

Selecting This Oak Plug For Fastener Concealment

This 3/8 inch oak screw hole plug from Smith Wood Products, Ltd. provides a dedicated way to cover 3/8 inch fastener bores while maintaining an oak appearance across the project. The unfinished oak accepts the same stain or clear coat as the surrounding wood, so finished parts read consistently. Classified within screw cover caps and washers and sold in full box quantities by Wurth Baer Supply, it suits cabinet shops, millwork firms, and focused DIY projects that repeat a 3/8 inch drill-and-plug pattern across multiple components.