8050 EZ Hinged Door Slide with 20lb Capacity, Anochrome, 20", Polybag

8050 EZ Hinged Door Slide For Up-And-Under Use

8050 EZ Hinged Door Slide describes a Knape and Vogt up and under flipper slide that supports 20 lb per pair, so an overhead or up-and-under door can travel smoothly without overloading the hardware in normal multimedia or workspace cabinets. The 20 inch length lets the door move into the cabinet, supporting typical cabinet depths where overhead flipper doors are used. The up and under flipper slide design supports doors that pivot and then slide inside the opening, which helps keep the door clear of the work area when open. As an overhead flipper slide in the Multimedia and Workspace Components category, it suits cabinets where doors need to retract out of the way while still closing flush when pulled back out. The Knape and Vogt brand and specific manufacturer part number 8050PEZ 20 help match this slide to projects calling for that exact model.

Key Flipper Slide Details That Support Jobs

• The KV8050 20 lb class per pair rating defines the working load, helping installers size doors and fronts so the slide operates within its capacity over repeated openings.
• The one-piece, non-marring roller allows the door to roll along the slide without marking the mating surface, which helps maintain a clean cabinet interior and smoother travel.
• The permanently staked hinge pin secures the hinge connection in the slide body, reducing the chance of hinge components loosening during repeated flipper door cycles.
• The up and under flipper slide product class describes motion where the hinged door moves up and then under, which is useful when an overhead door must clear the user workspace when open.
• The Overhead Flipper Slides category placement points to use in shelf, closet, and garage organization or multimedia and workspace cabinets, aligning this slide with common overhead cabinet door layouts.

Mounting And Cabinet Sidewall Installation Role

The note that the slide mounts to the inside of the cabinet sidewall defines how it is positioned, which helps plan for clearances along the interior sides of the cabinet opening. Mounting to the inside face keeps the slide aligned with the door movement path so the up and under action happens entirely within the cabinet footprint. This interior sidewall mounting setup also supports keeping external cabinet faces uncluttered, because the motion hardware works from the inside. As part of a flipper door installation in a cabinet, the 20 inch length and sidewall mounting combination give a predictable geometry for locating hinges and door dimensions relative to the cabinet depth.

Using This KV 8050 Flipper Slide In Projects

Where The KV 8050 Flipper Slide Fits Best

The 8050 EZ Hinged Door Slide sits in the Shelf, Closet and Garage Organization category, so it fits storage cabinetry where a door needs to retract into the cabinet instead of swinging out. As an Overhead Flipper Slides product within Multimedia and Workspace Components, it also matches overhead cabinets above desks or work surfaces where an open swinging door would interfere with access. The up and under flipper slide product class means the hinged door travels upward and then under into the cabinet interior, which suits applications where the open position should be contained inside the case. The 20 inch length works with cabinet depths around that dimension, offering a straightforward option when designing flipper doors in typical overhead cabinet runs.

Details That Help Repeatable Flipper Door Motion

The KV Model designation KV8050 and manufacturer part number 8050PEZ 20 identify a specific flipper slide with known behavior, which supports consistent performance when matching pairs across multiple cabinet openings. The 20 lb class per pair capacity sets expectations for door construction and any applied fronts so the slide runs within its intended load range. The one-piece, non-marring roller supports smoother movement along the slide path, which helps the door transition from closed to fully retracted without binding against the cabinet interior. The permanently staked hinge pin maintains the hinge connection over time, supporting repeatable up and under motion through many open and close cycles. Mounting to the inside of the cabinet sidewall keeps alignment fixed relative to the box, so door travel remains predictable in each cabinet where this Knape and Vogt slide is used.

Common Questions About The KV 8050PEZ 20 Slide

Selecting This 8050 EZ Slide For Overhead Doors

The 8050 EZ Hinged Door Slide with 20 lb capacity, 20 inch length, and up and under flipper design offers a defined solution for overhead or retracting cabinet doors. Using the KV Model KV8050 and part number 8050PEZ 20 ties projects to a specific Knape and Vogt slide, aligning cabinet layouts with known load class and interior sidewall mounting. For Shelf, Closet and Garage Organization or multimedia and workspace cabinets where doors need to roll inside the case, this overhead flipper slide configuration provides a clear motion style to build around.