Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Inspirations 3 in pull is a zinc die-cast cabinet handle in an oil rubbed bronze finish, so it delivers a classic dark tone that pairs well with a wide range of wood stains and painted fronts. The pull has a 3 in (76 mm) center-to-center drilling, which sets the mounting holes at a common cabinet spacing to streamline layout on doors and drawers. Its total length of 4-1/8 in gives fingers extra clearance beyond the screw holes, which helps when gripping deeper drawer fronts. A projection of 1-1/4 in stands the handle off the face of the cabinet, creating enough space for a full hand wrap while the front stays close to the surface for a tidy profile. The 7/16 in width keeps the look visually light while still defining a clear pull point.
This Amerock Inspirations cabinet pull is defined by a 3 in (76 mm) center-to-center measurement, which means the mounting holes on the cabinet or drawer front are drilled 3 in apart for a direct fit. With an overall length of 4-1/8 in, the pull spans beyond those holes, giving visual balance on both small and medium faces. The 1-1/4 in projection establishes the working distance off the face of the cabinet, affecting how easily hands can grip at different angles. A 7/16 in width keeps the contact surface narrow, which suits tight rail sections while still marking a clear handhold point.
The Amerock Inspirations Series 3 in (76 mm) center to center oil rubbed bronze pull works well anywhere a standard 3 in drilling pattern is used on doors or drawers, because its hole spacing aligns with that layout. In kitchen runs, the 4-1/8 in overall length sits comfortably on common drawer widths, so handles do not look undersized or oversized across a bank of fronts. On bath vanities, the 7/16 in width keeps the pull visually light on smaller doors, helping the hardware sit within narrow stiles. The 1-1/4 in projection allows fingers to wrap behind the pull on thicker drawer fronts, which supports smooth opening even when fronts carry added panel detail. The oil rubbed bronze finish ties into darker hinges or other decorative cabinet pull 3 inch hardware, helping create a consistent appearance along the whole installation.
The zinc die-cast construction of this Amerock BP1584ORB handle yields repeatable dimensions across multiple pulls, which helps lines stay straight when hardware is installed in rows. The fixed 3 in (76 mm) center-to-center distance provides a reliable reference for jigs or drilling templates, which supports quicker production work on multiple cabinet fronts. With an overall length of 4-1/8 in, installers can align edges to drawer proportions for a balanced look from piece to piece. The 1-1/4 in projection defines how far the pull stands off the surface, which influences how doors swing past frames without fingers contacting the cabinet face. A narrow 7/16 in width concentrates the grip area, which can make the handle feel precise when pulling heavier drawers from full extension slides. The oil rubbed bronze finish helps any slight variations in panel color read as intentional contrast rather than mismatch.
The Amerock BP1584ORB pull has a 3 in center-to-center, 4-1/8 in overall length, 1-1/4 in projection, and 7/16 in width, which together define the pulls footprint and hand clearance on the cabinet front.
The 3 in center-to-center spacing on this pull matches a standard drilling pattern, which helps align holes consistently across doors and drawers in new or retrofit cabinet work.
The 1-1/4 in projection sets how far the pull stands off the cabinet face, which affects finger clearance and how comfortably hands can grip from different angles.
The Amerock Inspirations 3 in pull is zinc die-cast, which provides a consistent molded form so multiple pulls align evenly in a run of cabinets.
The oil rubbed bronze finish on this pull gives a dark, warm look, which helps hardware coordinate with traditional cabinet styles and other bronze-toned components.
The 7/16 in width keeps the pull slim, which suits narrower rails and smaller drawer faces while still providing a defined gripping area.
The Amerock Inspirations Series 3 in (76 mm) center to center oil rubbed bronze pull BP1584ORB offers zinc die-cast construction with an oil rubbed bronze finish, so it suits projects calling for a warm, traditional look. With a 3 in center-to-center layout, 4-1/8 in overall length, 1-1/4 in projection, and 7/16 in width, the pull provides a clear balance between hand clearance and a compact footprint on cabinet fronts. For runs built around standard 3 in drilling, this handle gives a consistent measure to work from across kitchens, baths, or other casework.
Sold In: 1 Each
