Timberline File Frame Set gives a drawer box a defined rail system for hanging letter-width files in an organized track, so a standard drawer can function as a file drawer without changing the overall drawer construction. The kit is described as a letter size kit, so it is intended for letter-width file use where that format is required in office or workstation cabinetry. Two 13-1/8 inch long front and rear rail brackets are designed to screw mount into the front and back of the drawer box, so the rails fasten directly to the drawer structure for a stable support layout. The rail system is made of metal with a black finish, so it brings a consistent appearance that visually matches other black hardware in a cabinet run. The black finish is guaranteed to withstand 50,000 cycles with no paint wear or other degradation, so the rails are designed to handle repeated file access in daily use.
The kits are described as easy to install, with a clear three-step process that follows the drawer box geometry. Step 1 states to screw the front and rear rail brackets into the drawer box, so the installer first establishes the fixed anchor points at the front and back of the drawer for consistent spacing. Step 2 states to cut to length with a hacksaw the side rails which snap onto the front and rear rail brackets, so the 25 inch long front-to-back side rails can be trimmed to match the internal drawer depth and then snapped in for a custom fit. Step 3 states to snap the center rail into place, so the 12 inch side-to-side rail is installed only after the main lengthwise rails are seated, giving a stable frame before cross-tying the layout.
The product is identified as a Timberline File Frame Set for letter width file use, so it fits applications where a drawer needs to carry hanging letter-size files in a controlled track. It is part of the file drawer components class within drawer construction systems and drawer box accessories, so it is intended to live inside a wooden or similar drawer box rather than replace the drawer itself. The system uses two 13-1/8 inch long front and rear rail brackets that mount into the front and back of the drawer box, so it aligns with drawer designs that provide solid front and rear panels for screw mounting. Two 25 inch long front-to-back side rails span between those brackets, so the setup suits drawer depths that can be accommodated by trimming these rails to length with a hacksaw before snapping them into place.
The letter size kit layout with front and rear rail brackets, front-to-back side rails, one side-to-side rail, and two clips creates a defined frame, so file positions are guided by metal rails instead of relying on loose supports. The instruction to cut the side rails to length with a hacksaw before snapping them onto the front and rear brackets means the same FF-SK2 file system adapts to various drawer depths while keeping the rails firmly seated on a bracketed base. The center rail that snaps into place between the side rails adds a cross member inside the frame, so the file rows gain a central reference that helps keep the hangers aligned under load. The metal construction with a black finish that is guaranteed to withstand 50,000 cycles with no paint wear or other degradation means the working surfaces of the rails maintain their finish through repeated file movement, so the track appearance and feel remain consistent over long-term operation.
The Timberline File Frame Set is described as a letter size kit for letter width file use, so it is intended for hanging letter-size file layouts inside a drawer box.
The Timberline File Frame Set uses two 13-1/8 inch front and rear rail brackets that are designed to screw mount into the front and back of the drawer box, creating fixed anchor points.
The Timberline File Frame Set uses two 25 inch front-to-back side rails that are cut to length with a hacksaw, so they can match the internal drawer depth before snapping onto the brackets.
The Timberline File Frame Set provides one 12 inch side-to-side rail that snaps into place between the side rails, adding a cross member to support and guide the file rows.
The Timberline File Frame Set rail system is made of metal with a black finish, so it offers rigid file support with a dark appearance matching other black drawer hardware.
The Timberline File Frame Set finish is guaranteed to withstand 50,000 cycles with no paint wear or other degradation, supporting long-term file access without visible finish breakdown.
The Timberline File Frame Set for letter width file use, identified by manufacturer part FF-SK2, provides a defined metal rail layout for turning a drawer box into a letter-size file drawer. With screw-mounted 13-1/8 inch front and rear rail brackets, 25 inch front-to-back side rails cut to length with a hacksaw, a 12 inch side-to-side rail, and two clips used with the side rail, the system creates a structured track for hanging files. The metal rail construction with a black finish guaranteed to withstand 50,000 cycles helps this drawer box file system perform in file-heavy environments where consistent access and appearance matter.
Sold In: 1 Each