Timberline File Frame Set for Legal Width File, Black

Timberline File Frame Set For Legal Files

Timberline file frame set for legal is a metal rail system that creates hanging file storage in a drawer box for legal-width files. The kit uses front and rear rail brackets, side rails, and a center rail to form a rigid frame that supports legal-size filing in a cabinet drawer. Two 16-1/8 inch front and rear rail brackets screw mount into the front and back of the cabinet, so the frame ties directly into the drawer structure for stable file support during daily use. Two 25 inch front-to-back side rails span between the brackets, giving full-depth support so legal folders ride smoothly from front to back. A 15 inch side-to-side rail sets the legal width across the drawer, so hanging rails stay aligned. Two clips work with the front-to-back side rails, helping lock the layout so rows stay straight as the drawer cycles.

Key File Drawer Components For Legal Use

• The legal size kit uses two 16-1/8 inch front and rear rail brackets that screw mount into the front and back of the cabinet, creating a fixed reference line so the file frame stays square to the drawer box during operation.
• Two 25 inch front-to-back side rails run between the rail brackets, giving continuous front-to-back support so loaded legal folders track along metal rather than wood edges, which helps maintain smooth, repeatable motion.
• One 15 inch side-to-side rail spans across the drawer, establishing the legal-width spacing so hanging bars stay parallel and legal folders sit properly without shifting into the drawer sides.
• Two clips are designed to be used with the front-to-back side rails, tying the rails into the frame so the layout resists spreading or racking while files are added and removed.
• The rail system is made of metal with a black finish, so the file rails present a uniform appearance inside the drawer and coordinate with other black hardware components in the cabinet run.
• The black finish is guaranteed to withstand 50,000 cycles with no paint wear or other degradation, supporting long-term filing performance in drawers that open and close many times each day.

Installation Steps For Legal Size File Frame

The legal size kit is designed for a straightforward three-step installation that fits typical shop workflows. First, the two 16-1/8 inch front and rear rail brackets screw into the drawer box front and back, so the mounting points are fixed directly to the cabinet structure. Second, the two 25 inch side rails are cut to length with a hacksaw and then snapped onto the front and rear rail brackets, letting the installer adjust for drawer depth while keeping a positive snap-fit at each end. Third, the 15 inch center rail snaps into place, tying the sides together at the legal-width spacing. This sequence builds the frame from anchored brackets outward, so alignment is controlled by the drawer geometry and the metal parts rather than by loose measurements.

Using This Legal File System In Drawer Builds

Where This Legal File Frame Kit Fits Best

This file drawer components set is suited to drawer box projects where legal-size hanging files are required inside a cabinet. Because the front and rear rail brackets are designed to screw mount into the front and back of the cabinet, the system integrates directly into drawer boxes built for office, commercial, or home file storage. The two 25 inch front-to-back side rails give enough length to serve typical full-depth legal file drawers, and cutting them to length with a hacksaw lets the installer match the actual interior depth. The 15 inch side-to-side rail defines the hanging file width, which supports layouts based specifically on legal-size folders instead of letter-size spacing. With metal construction and a black finish, the kit aligns visually and structurally with other metal drawer components used in cabinetry and woodworking projects.

Why These File Drawer Details Support Consistency

The CompX Timberline file system layout is built around metal rails and brackets, so the geometry of the file frame depends on factory-formed parts rather than improvised wood strips. The screw-mounted 16-1/8 inch front and rear rail brackets give a consistent mounting baseline, which helps drawers across a project share the same file rail height and setback. Cutting the 25 inch side rails to length with a hacksaw means each drawer can match its exact internal depth while still snapping securely to the brackets, reducing variation between units. Snapping the center 15 inch rail into place fixes the legal-width spacing, so hanging file rows stay uniform across multiple drawers. The two clips that work with the front-to-back side rails add localized restraint, which supports alignment over time as drawers are loaded with legal files. The black finish that is guaranteed to withstand 50,000 cycles with no paint wear or other degradation supports long-duty service in file drawers that see frequent open-and-close cycles, helping the system maintain both appearance and metal-to-folder contact quality.

Common Questions About This Legal File Frame

Select This Legal Kit For Drawer Projects

The legal size kit from CompX Timberline gives a defined rail system for building legal-width file storage inside a drawer box using metal components. With screw-mounted 16-1/8 inch front and rear rail brackets, cut-to-length 25 inch side rails, and a 15 inch side-to-side rail that snaps into place, the FF-SK3 layout ties directly into cabinet geometry. The black metal construction and finish, guaranteed for 50,000 cycles with no paint wear or other degradation, support demanding file drawer applications where consistent hanging performance and appearance matter over time.