Amerock Manor Cup Pull 3" (76 mm) Center to Center, Polished Chrome, BP2613026

Amerock Manor 3 In Cup Pull For Cabinets

Amerock Manor 3 in cup pull is a polished chrome cabinet handle designed around a 3 in (76 mm) center-to-center mounting dimension, which lets it fit door or drawer drill patterns that follow this standard spacing for a clean, aligned look. The cup pull shape is formed from zinc die-cast material, giving the handle a solid feel while keeping weight manageable when installing multiple pulls across a run of cabinets. A polished chrome finish on the handle creates a bright surface that reflects light, helping cabinet faces read crisp and defined in kitchens, baths, or casework using this finish. The handle length of 3-7/16 in (87 mm) slightly exceeds the mounting centers, so the pull edges visually frame the fastener line and give users a full, usable grip across the front. A projection of 7/8 in (22 mm) sets the front edge away from the door or drawer, providing finger clearance during everyday use.

Key Amerock Manor Cup Pull Working Details

• The 3 in (76 mm) center-to-center dimension establishes a consistent hole spacing, which simplifies layout on cabinet doors and drawers that are drilled to this common standard in many shop and field installations.
• The 3-7/16 in (87 mm) overall length gives the pull a modest overhang beyond the mounting points, which helps visually balance narrow and standard-width drawer fronts without overwhelming smaller faces.
• The 7/8 in (22 mm) projection holds the gripping edge off the cabinet surface, which provides enough space for fingers to wrap behind the pull while limiting how far the hardware extends into walkways.
• The 1 in (25 mm) width and matching 1 in (25 mm) base width create a stable footprint, which spreads the contact area on the cabinet face and supports straightforward alignment during layout and installation.
• The polished chrome finish delivers a reflective surface, which pairs with other polished chrome components in a project so hinges, faucets, and pulls read as a coordinated finish set.
• The zinc die-cast construction forms the cup profile in a single, consistent body, which supports repeatable appearance across multiple pulls used on banks of doors and drawers.

Amerock BP2613026 Mounting Fit And Dimensions

This Amerock BP2613026 pull uses a 3 in (76 mm) center-to-center measurement, which positions its mounting points on a straight line that matches a widely used cabinet drilling standard for cup pulls. The base length of 3-7/16 in (87 mm) and base width of 1 in (25 mm) match the overall footprint, which means the visible body area corresponds directly to the support area resting on the cabinet surface. With a projection of 7/8 in (22 mm), the cup pull sits close to the door or drawer front while still creating a defined gripping space along the front edge. A polished chrome finish on the zinc die-cast body defines the pull as part of Amerock's Manor Collection, giving a consistent visual reference when cabinets specify that collection and finish across the job.

Using This Manor Collection Pull In Cabinet Work

Where This Amerock Manor Cup Pull Fits Best

The Amerock Manor Series 3 in (76 mm) center to center polished chrome cup pull is part of the Manor Collection, which aligns its style with other components identified under that collection name for unified cabinet hardware layouts. Its 3 in (76 mm) center-to-center spacing is suited to cabinet doors and drawers drilled on that dimension, allowing new work or replacement work to follow a single drilling pattern across a run. The 3-7/16 in (87 mm) length keeps the pull proportionate on standard drawer fronts, so a bank of drawers can repeat the same pull without needing multiple sizes. A width and base width of 1 in (25 mm) give this pull a compact face, which is useful on narrower rails or smaller doors where a larger pull footprint could crowd the stile. The polished chrome finish aligns with designs that call for bright, reflective metal on faces, tying in with polished chrome fixtures specified elsewhere in the room.

Details That Support Consistent Layout And Use

The zinc die-cast material of this cup pull forms a defined, repeatable profile, which helps installers line up multiple pulls with matching appearance along long cabinet runs. A projection of 7/8 in (22 mm) creates a practical handhold, giving users space to engage the pull edge while keeping the hardware low profile on cabinet faces. The base length of 3-7/16 in (87 mm) mirrors the overall length, so the full body of the pull sits flat against the cabinet surface, making alignment to layout lines straightforward. The 1 in (25 mm) width provides enough front-to-back depth for a comfortable gripping surface while maintaining a clean front elevation on framed or frameless cabinet styles. As part of Amerock Corporation's Manor Collection in polished chrome, this pull can be specified by Manufacturer Part # BP2613026, which supports clear identification when ordering or matching to project documentation. The defined center-to-center dimension and consistent body size help reduce layout variation from cabinet to cabinet.

Buyer Questions On Amerock Manor 3 In Cup Pull

Selecting The Right Amerock Manor Cup Pull

The Amerock Manor Series 3 in (76 mm) center to center polished chrome cup pull, identified as Manufacturer Part # BP2613026, combines a 3 in mounting pattern with a 3-7/16 in (87 mm) length for balanced cabinet proportions. Its zinc die-cast construction and 7/8 in (22 mm) projection create a defined, usable grip on doors and drawers. With a 1 in (25 mm) width and matching base footprint, this polished chrome Manor Collection pull offers a compact, coordinated option when a project calls for a 3 in center-to-center polished chrome cup pull.