Amerock Manor Cup Pull 5-1/16" (128 mm) Center to Center, Satin Nickel, BP26138G10

Amerock Manor Cup Pull 128mm For Cabinets

Amerock Manor cup pull 128mm gives cabinets a defined grip point across a 5-1/16 in (128 mm) center-to-center span, which helps align drilling layouts on multiple fronts during new work or retrofit jobs. The cup pull format creates a full-hand catch across its 1 in projection, which supports repeatable drawer operation where users pull from the center. A 5-1/2 in overall length bridges wider rail sections, which helps this pull sit visually balanced on standard and larger drawer faces. The 1 in width concentrates the pull visually while still leaving room above and below for finish reveals or edge profiling. The satin nickel finish presents a muted metallic surface, which suits projects calling for a modern but not high-gloss look.

Key Amerock Manor Cup Pull Working Advantages

• The 5-1/16 in (128 mm) center-to-center measurement matches a common drilling pattern, which supports straightforward alignment with existing 128 mm layouts on cabinet doors or drawers.
• The 5-1/2 in length spans a broader portion of the cabinet face, which helps the pull read proportionally on standard-width drawers and panels.
• The 1 in projection defines how far the grip stands off the surface, which matters when planning hand clearance relative to door overlaps, adjacent pulls, or trim details.
• The 1 in width keeps the pull compact from top to bottom, which helps maintain visible stile or rail detail above and below the hardware line.
• The satin nickel finish establishes a specific color tone, which allows consistent hardware selection across rooms calling for similar metal finishes.

Mounting Fit For 128 Mm Center-To-Center Layouts

The 5-1/16 in (128 mm) center-to-center value sets the mounting hole spacing for this Amerock Corporation pull, which lets installers position drilling exactly to that measurement for repeat work across cabinet runs. With a 5-1/2 in overall length, there is modest overhang beyond each mounting point, which gives some visual tolerance for slight layout variations on site. The 1 in projection defines how far the pull sits off the face, which matters when planning clearances near adjacent doors or vertical obstacles.

Using This Manor Collection Pull In Projects

Where The Amerock Manor Cup Pull Fits Best

The Manor Collection identity ties this piece to Amerock decorative hardware groupings, which helps projects that keep a consistent look across multiple handles and pulls. As a cup pull, this part suits drawer and door fronts where users benefit from a defined lower cup edge, which provides an easy grab point in daily operation. The satin nickel finish positions this pull for jobs targeting a specific nickel tone across kitchen, bath, or casework runs, giving a coordinated look wherever matching hardware from the same finish family appears. The 5-1/16 in (128 mm) center-to-center spacing places this pull in layouts that favor a medium-span handle, which works on many base cabinet drawers and wider wall cabinet doors. Combined with the 5-1/2 in length, this span helps the pull sit comfortably on fronts that are neither extremely narrow nor extra-wide.

Details That Support Repeatable Cabinet Results

The defined 5-1/16 in (128 mm) center-to-center measurement allows installers to build or reuse templates set to that spacing, which speeds drilling and keeps all pulls aligned linearly across banks of cabinets. A 1 in projection fixes how far the hand engages off the surface, which supports consistent ergonomics from one cabinet to the next in the same project. The 1 in width gives a predictable top-to-bottom footprint, which simplifies layout when balancing this pull relative to panel edges, rails, or applied molding. The satin nickel finish is a locked-in specification, which aids ordering and replacement of matching pulls under the same finish description when projects expand later. The Amerock Corporation manufacturer tie-in and BP26138G10 part number together create an exact reference, which helps shops and installers reorder the same cup pull for service work or phased installations.

Common Questions About Amerock Manor Cup Pull 128mm

Selecting This Satin Nickel Cup Pull For Work

The Amerock Manor Series 5-1/16 in (128 mm) center-to-center satin nickel cup pull brings defined dimensions and finish into cabinet work, which supports consistent layout and appearance from one front to the next. With a 5-1/2 in length, 1 in projection, and 1 in width, it offers a predictable footprint that suits many standard drawers and doors. Using the BP26138G10 part number and satin nickel designation streamlines specifying this same pull again whenever projects extend or repeat across multiple jobs.