Amerock Manor Polished Nickel 1" (25 mm) L x 1" (25 mm) W Knob, BP26131PN

Cabinet Knob Square 1 Polished Nickel Use

Cabinet Knob Square 1 Polished Nickel describes a 1 inch long by 1 inch wide Amerock Manor Series knob in a polished nickel finish, so it suits projects calling for a compact, square pull point with a bright metal look. The knob is manufactured by Amerock Corporation as part of the Manor Collection, which positions it with other pieces celebrating the Jeffersonian spirit of American architecture, so the profile matches traditional and classic interiors. Its zinc die-cast material builds a solid metal body, which supports everyday cabinet and furniture use where a rigid grip point is needed. The polished nickel finish provides a reflective surface, which visually matches other polished nickel decorative hardware in the space. The knob has a 1-1/16 inch projection, so fingers have room to pull the door or drawer without crowding the surface.

Key Amerock BP26131PN Details For Projects

• The knob measures 1 inch in length and 1 inch in width, creating a square footprint that lines up cleanly on narrow stiles and drawer fronts where oversized pulls could crowd edges.
• A 1-1/16 inch projection sets the gripping surface off the face of the cabinet, giving adequate finger clearance while keeping the knob from sticking out too far into walkways or tight galley spaces.
• The base diameter is 7/16 inch, so the contact point is compact and suits door and drawer faces where a smaller mounting pad looks proportional to narrow or thin frame members.
• The knob is made from zinc die-cast material, forming a dense metal component that handles routine opening and closing cycles on cabinets and furniture pieces.
• The polished nickel finish defines the surface appearance, so the knob visually aligns with other polished nickel decorative hardware and trim used across the room.

Amerock Square Knob Fit And Mounting Details

The Amerock Corporation knob identified as BP26131PN uses an 8-32 x 1 inch screw size, so it mounts through a standard cabinet door or drawer front drilled for that thread pattern and length. Its 7/16 inch base diameter creates a small circular contact area against the wood, which helps position the knob on face frames, slab doors, or drawer fronts without covering large areas of the surface. With the 1 inch by 1 inch square outline, the knob centers neatly over the drilled hole, which supports precise layout on grids of drawers or banks of doors. The 1-1/16 inch projection dimension defines how far the gripping area stands away from the cabinet face, so installers can plan clearances relative to adjacent doors, walls, and appliance handles.

Using The Amerock Manor Knob In Work

Where This Manor Collection Knob Performs Best

The knob belongs to the Amerock Manor Collection, which is described as genuine, distinctive and classic, so it fits residential or light commercial work where a traditional architectural style is part of the design intent. Its square 1 inch by 1 inch footprint works on cabinet doors, vanity fronts, or built-in storage where uniform, compact hardware is needed across multiple openings. The polished nickel finish supports use in kitchens, baths, and built-ins that coordinate with polished nickel faucets, hinges, or other visible metal parts. Because it is categorized under Decorative Hardware & Moldings and Knobs, it is suited to cabinet and furniture applications where a single-point pull is the desired hardware style instead of a handle. The zinc die-cast construction provides a metal mass appropriate for doors and drawers that see frequent operation during day-to-day use. With the small 7/16 inch base diameter, the knob sits visually light on narrow rails and drawer fronts, which matters when designers want a refined, architectural touch rather than a bulky mounting pad. The manufacturer part number BP26131PN ties it to this exact size, finish, and form within the Amerock line, which helps standardize selections across a project that uses multiple Manor Collection components.

Details That Support Layout Consistency And Results

The 1 inch length and 1 inch width dimensions create a true square, so installers can align edges parallel to door or drawer lines for a consistent look on rows of cabinets. The 1-1/16 inch projection is a fixed value, which allows planning of reveals and clearances on adjacent faces so hardware pieces do not visually conflict. Its polished nickel finish gives a bright, reflective surface that highlights the knob profile when mounted against painted or stained wood, helping users visually locate the pull point. The 7/16 inch base diameter keeps the mounting footprint small, which lets layout grids stay tight without overlapping molding profiles or panel details. The specified 8-32 x 1 inch screw size defines the fastener interface, which supports through-bore mounting from the back side of a standard cabinet door or drawer front. Because the knob is categorized as an Amerock product in the Knobs, Amerock class, it can be matched across a job with other Amerock components using similar finishes and styling. The Manor Collection reference connects it to a portfolio centered on the Jeffersonian spirit of American architecture, which helps maintain an architectural theme from room to room when repeating this knob on multiple installations.

Common Questions About Amerock BP26131PN Knob

Selecting This Knob For Cabinet Projects

The Amerock Manor Series polished nickel 1 inch by 1 inch knob pairs a compact square footprint with a 1-1/16 inch projection, so it suits cabinets and furniture where a classic, metal pull point is needed. The zinc die-cast construction and polished nickel finish give a consistent appearance across doors and drawers that share this model. With its 7/16 inch base diameter and 8-32 x 1 inch screw size interface, it aligns with standard drilling patterns that support clean, repeatable layouts. Use the BP26131PN part number when specifying or ordering this knob for projects that follow the Manor Collection style.