Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Sleek Series 3 in pull gives cabinets a minimalist look by using crisp, fluid lines from the Sleek Collection in a compact 3 in (76 mm) center-to-center size, which fits many standard drilled cabinet hole layouts. The polished chrome finish reflects light clearly, so the pull reads clean and modern on doors and drawers in kitchens, baths, and shop-built casework. Zinc die-cast construction forms the body of the pull, providing a solid-feeling grip in daily cabinet use. A 5-1/16 in (129 mm) overall length leaves finger room at each end beyond the 3 in mounting centers, which helps with comfortable grasping on wider drawer fronts. The 1 in (25 mm) projection spaces the hand away from the cabinet face, supporting easy opening even on thicker door edges.
This 3 in center to center cabinet pull spans 3 in (76 mm) between mounting holes, so it aligns with a widely used cabinet drilling pattern on many doors and drawers. The overall length of 5-1/16 in (129 mm) extends past the mounting points, which centers the grip over the screw line for balanced pulling force. The 1 in (25 mm) projection keeps the bar comfortably off the face of the cabinet, so hands can wrap behind the pull without interference from raised panels or applied moldings. A 1/2 in (13 mm) width gives a slim front view while still presenting enough surface depth for a confident pinch or four-finger pull on heavier drawers.
The Sleek Collection design with crisp, fluid tones suits cabinets where a definitive minimalist look is desired, because the simple form does not compete with door profiles. On flat-panel or slab cabinet doors, the 5-1/16 in (129 mm) overall length stretches across more of the rail, visually anchoring the front while staying compact. On drawers drilled at 3 in (76 mm) center-to-center, this pull drops into the existing pattern, helping maintain alignment with neighboring hardware across a bank of cabinets. The polished chrome finish coordinates visually with polished chrome faucets, shower trim, and appliance details, tying together kitchen or bath hardware. In shop-built or commercial millwork, the streamlined 1/2 in (13 mm) width reads clean against laminate or veneer faces, supporting a modern aesthetic.
The 3 in (76 mm) center-to-center mounting dimension keeps screw loads close together, which helps concentrate force in a predictable zone on the door or drawer front. The zinc die-cast construction provides a sturdy body, so repeated pulling across this span is supported by a solid casting. A 1 in (25 mm) projection is significant for hand clearance, letting fingers wrap behind the pull without contacting the cabinet face during opening, which can reduce finish wear around the hardware area. The 1/2 in (13 mm) width creates a narrow leading edge, allowing fingertips to hook under or around the pull easily even in tight layouts near walls or adjacent cabinets. The polished chrome finish on the Amerock BP2613426 pull presents a smooth surface that feels consistent along the full 5-1/16 in (129 mm) length, giving the hand the same contact feel whether the pull is grasped at the center or nearer one end.
The Amerock Sleek Series BP2613426 pull has a 3 in (76 mm) center-to-center measurement, which matches a common cabinet drilling pattern for handles and pulls.
The Amerock BP2613426 pull measures 5-1/16 in (129 mm) overall length, giving extra bar length beyond the 3 in mounting centers for a fuller hand grip.
The Sleek Collection cabinet pull projects 1 in (25 mm) from the cabinet face, allowing finger clearance between the pull and the door or drawer front.
The Amerock BP2613426 pull is made from zinc die-cast material, providing a solid cast body for regular cabinet door and drawer operation.
This 3 in Amerock cabinet handle has a polished chrome finish, giving a bright, reflective look that coordinates with other polished chrome hardware.
The Amerock Sleek Series 3 in pull has a 1/2 in (13 mm) width, creating a slim profile while still offering enough surface for a secure grip.
The Amerock Sleek Series 3 in pull with polished chrome finish and zinc die-cast construction offers a minimalist cabinet handle sized for 3 in (76 mm) center-to-center layouts. Its 5-1/16 in (129 mm) overall length, 1 in (25 mm) projection, and 1/2 in (13 mm) width work together to provide comfortable cabinet operation on both doors and drawers. For projects using Amerock BP2613426 throughout a room, the consistent size and finish help keep hardware details aligned from cabinet to cabinet.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AMBP26135-26D Mfr# BP2613526D | Amerock Sleek Pull 3-3/4" (96 mm) Center to Center, Brushed Chrome, BP2613526D | ||||
Sold in: 1 Each |  AMBP26135-G10 Mfr# BP26135G10 | Amerock Sleek Pull 3-3/4" (96 mm) Center to Center, Satin Nickel, BP26135G10 |