Amerock Sleek 3-3/4" (96 mm) Center to Center Brushed Chrome Pull, BP2613526D

Amerock Sleek Series Brushed Chrome Cabinet Pull

Amerock Sleek Series brushed chrome pull BP2613526D is a zinc die-cast handle designed for cabinet and furniture projects where a modern, linear look is needed. The handle measures 6-13/16 inches in overall length, so it spans a noticeable width on doors or drawers and creates a strong visual line across the front. Its 3-3/4 inch, or 96 mm, center-to-center drilling gives a standard mounting layout that aligns with many common boring patterns in shops. The 1-1/8 inch projection sets the grip away from the surface to give fingers space to pull without rubbing the face, which helps when doors are heavier. A 1/2 inch width keeps the pull visually slim while still providing a defined edge to grab in daily use. The brushed chrome finish offers a muted metallic appearance that supports contemporary and transitional cabinet designs.

Key Amerock Sleek Pull Details For Cabinet Work

• The zinc die-cast material gives this pull a solid feel while allowing precise shaping of the Sleek profile, which supports consistent alignment across multiple doors and drawers in a run.
• The brushed chrome finish softens reflections compared with polished chrome, which helps the pull sit quietly on the face while still tying into other chrome elements in a room.
• The 3-3/4 inch, or 96 mm, center-to-center dimension creates a predictable drilling layout that fits many shop jigs, reducing layout time on repetitive cabinet or drawer fronts.
• The 6-13/16 inch overall length spreads the handle visually across the panel, which can help balance wider drawer fronts or taller doors in a bank of cabinets.
• The 1-1/8 inch projection holds the gripping surface away from the face, giving space for fingers and helping reduce knuckle contact on thicker doors or drawer fronts.
• The 1/2 inch width keeps the handle profile slim and unobtrusive, which is useful when a cleaner, linear hardware line is preferred on modern cabinet designs.

Mounting Dimensions And Fit For This Amerock Pull

This Amerock Corporation handle uses a 3-3/4 inch, or 96 mm, center-to-center dimension so hole boring can follow a straightforward measurement from one fastener point to the other. With an overall length of 6-13/16 inches, the pull extends beyond the boring points, allowing installers to position it so the ends frame the working area of a door or drawer front. The 1-1/8 inch projection keeps the gripping surface proud of the cabinet face, which supports finger clearance when mounted on face-frame or frameless cabinets. At 1/2 inch in width, the rail of the pull keeps a narrow footprint on the front, which can help when working with tight spacing between adjacent fronts or edge details.

Using The BP2613526D Pull In Real Projects

Where This Brushed Chrome Pull Works Best

This Amerock Sleek Series brushed chrome pull is positioned in the Decorative Hardware & Moldings Handles and Pulls category, so it fits jobs that need visible cabinet hardware as part of the finished look. The brushed chrome finish lets it tie into hinges, faucets, or other chrome elements without a high-gloss surface, which helps when the design calls for a calmer metallic tone. With a 6-13/16 inch overall length, it works well across medium to wider drawer fronts, giving a longer gripping bar across the panel. The 3-3/4 inch, or 96 mm, center-to-center measurement means this handle can be laid out easily on new cabinet doors where a standard drilling pattern is preferred. The zinc die-cast material suits residential and light commercial cabinet applications where a shaped metal pull is part of the design.

Details That Support Consistent Cabinet Results

The Amerock BP2613526D part number identifies this specific Sleek Series configuration, so shops can repeat the same model across multiple projects when a uniform hardware line is required. The 3-3/4 inch center-to-center spacing pairs well with common drilling jigs, which helps keep handles level and consistent from front to front in production runs. A 1-1/8 inch projection sets the strike point of the hand away from the surface, which can reduce fingerprints and wear patterns directly around the fastener line. At 1/2 inch width, the pull provides a clear edge for grip without covering too much of the door or drawer face, which is useful when the panel material or finish needs to stay visually prominent. The Amerock Sleek collection identity signals a coordinated style family, allowing this handle to be matched with other Sleek pieces on the same job.

Common Questions About This Amerock Sleek Pull

Select This Amerock Pull For Coordinated Cabinet Runs

The Amerock Sleek Series brushed chrome pull BP2613526D combines a 3-3/4 inch, or 96 mm, center-to-center layout with a 6-13/16 inch overall length, giving both predictable drilling and a substantial visual span. Its zinc die-cast construction and 1-1/8 inch projection support comfortable gripping on doors and drawers. The 1/2 inch width and brushed chrome finish keep the profile lean while still reading as a finished design element. For cabinet and furniture projects that call for a modern, linear handle from a defined collection, this Amerock Corporation pull from the Sleek line is a direct, spec-ready choice.