Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade hook and loop sanding sheet is a 3 x 4-5/16 inch abrasive sheet that pairs a manageable pad size with hook and loop backing, so changing sheets on a compatible pad is fast during production work. The 150 grit aluminum oxide on C-weight paper provides a fine cutting action that suits light de-burring and scouring, helping refine edges and surfaces without aggressive stock removal. The sheet design is described as no hole, which means the abrasive face is continuous, useful when full-face contact is preferred. Being part of Dynabrade general purpose production paper means it is intended for repeated use in shop environments where consistent sanding results across multiple workpieces are important.
This 3 x 4-5/16 inch Dynabrade hook and loop sanding sheet is sized for pads that accept that rectangular footprint, so the user can match the sheet area to the tool pad for even contact. The hook and loop backing is designed to mate with a matching hook and loop pad surface, allowing the sheet to be pressed on, used, and then removed when it is time to change abrasives. Because the sheet is no hole, the abrasive face remains continuous, so sanding contact is defined entirely by pad area, which matters when working into tighter zones or across narrow edges. The combination of aluminum oxide on C-weight paper and 150 grit positioning is suited to light de-burring and scouring, where controlled material removal and surface cleanup are desired.
This Dynabrade aluminum oxide sanding sheet in a 3 x 4-5/16 inch size fits sanding tasks that benefit from a compact rectangular pad, such as working along edges, into smaller panels, or around detail areas where larger sheets may be cumbersome. Its general purpose production paper description places it in everyday shop use where the same abrasive type may be applied to multiple parts over a shift. The 150 grit rating targets light de-burring and scouring, helping remove minor burrs or surface marks while preparing parts for subsequent finishing steps. With aluminum oxide bonded to C-weight paper, the sheet brings together a cutting mineral and a backing that can flex to the work yet still present a stable sanding surface. The no hole configuration serves work where uninterrupted abrasive coverage across the pad contact area is preferred over a vented pattern.
The hook and loop backing on this Dynabrade abrasive sheet allows it to attach directly to a matching hook and loop pad surface, which streamlines sheet changes during multi-step sanding sequences and supports consistent repositioning on the pad. Aluminum oxide as the abrasive grain works with the 150 grit rating to provide a fine, controlled cut, helping refine surfaces during light de-burring and scouring rather than aggressively shaping them. The C-weight paper backing under the aluminum oxide contributes a balance of flexibility and support, so the sheet can respond to modest contours while still holding flat on appropriate surfaces for even scratch patterns. Because the sheet is specified as no hole, the full abrasive face contacts the work where the pad meets the surface, which can benefit sanding situations that favor continuous contact across the pad width and length. All of these details combine to create a sanding sheet that supports repeatable surface preparation across multiple workpieces in general production use.
The Dynabrade 93785 sanding sheet is described as general purpose production paper used for light de-burring and scouring, so it targets everyday surface refinement tasks in shop environments.
The hook and loop backing allows the sheet to attach to a matching pad, so sheets can be applied and removed quickly, supporting efficient grit changes during production work.
The 150 grit rating places this sheet in a finer abrasive range suited to light de-burring and scouring, helping smooth surfaces without the deeper scratches of coarser grits.
The no hole design keeps the abrasive face continuous, so the full 3 x 4-5/16 inch surface contacts the work wherever the pad meets the material.
Aluminum oxide on C-weight paper provides a cutting abrasive on a balanced paper backing, so the sheet offers both conformity and support during sanding passes.
The 3 x 4-5/16 inch size defines a compact rectangular sheet that reaches smaller surfaces and edges while still covering enough area for efficient sanding strokes.
The Dynabrade hook and loop 150 grit aluminum oxide sanding sheet in a 3 x 4-5/16 inch no hole format offers a defined combination of size, backing, and abrasive suited to general purpose production work. Its design focuses on light de-burring and scouring with a continuous abrasive face, so it supports controlled surface refinement where a compact rectangular pad is preferred. For shops relying on hook and loop pads and looking to maintain consistent sanding performance across multiple workpieces, this Dynabrade sheet provides a clearly specified option grounded in its described materials, grit, and format.
Sold In: 1 Package