Dynabrade 150 Grit 4-Hole Hook & Loop Sanding Sheet describes a 3 x 4-5/16 inch abrasive sheet that handles general purpose production work, so installers and fabricators can use one sheet style across many sanding tasks on the bench. The 150 grit rating means this sheet fits where a medium-fine cut is needed, so surfaces can be smoothed while still keeping control over material removal. The 4-hole layout coordinates with compatible vacuum-style backing pads, so dust is pulled through the sheet instead of building up on the face. Hook and loop backing allows the sheet to fasten to hook and loop pads, so swapping sheets during a sequence happens quickly without tools. Being part of Dynabrade abrasive sheets ties this piece into a wider system of abrasives, so crews can match this sheet with other Dynabrade options for a consistent sanding process.
The 3 x 4-5/16 inch size defines a compact rectangular sanding area, so the sheet works well where controlled coverage over edges, narrow parts, or small panels is important. The hook and loop backing engages matching hook and loop pads, so installing or removing the sheet is a press-on, peel-off motion during normal tool setup. The 4-hole pattern aligns with compatible vacuum pad designs, so dust can be moved through the sheet surface instead of loading on the grit. The aluminum oxide on C-weight paper structure creates a stable sheet body, so the abrasive stays supported under the pad during repeated passes in a production setting.
The Dynabrade 150 Grit 4-Hole Hook & Loop Aluminum Oxide on C-Weight Paper Sanding Sheet, 3 x 4-5/16, fits abrasive sheet applications where a compact pad needs a controlled sanding footprint, so operators can work close to edges, corners, and narrow parts. The general purpose production paper description indicates it is suited to ongoing shop or jobsite sanding tasks, so the same sheet type can move between prep, intermediate smoothing, and cleanup within a run of parts. Being used for light de-burring means it targets slight burrs left after cutting or machining, so technicians can knock down sharp transitions while maintaining the overall profile. Its scouring capability supports surface cleanup, so marks or residues can be addressed as part of normal sanding passes without changing to a specialty abrasive.
The 150 grit rating places this sheet in a medium-fine range, so it refines surfaces after coarser passes while still leaving enough tooth for later finishing stages. The 4-hole design works with matching hole patterns on sanding pads, so dust is directed through the sheet face and away from the cutting points, which supports more consistent cutting across the usable life of the sheet. Hook and loop backing allows repeated removal and reattachment, so operators can rotate or replace sheets during a shift without tools or clamping steps. Aluminum oxide on C-weight paper creates a firm yet flexible base, so the abrasive grains are supported during light de-burring and scouring passes and can stay engaged with the work rather than collapsing under pad pressure.
The Dynabrade 93890 sheet uses aluminum oxide on C-weight paper, so the abrasive layer provides a balanced cut for production sanding tasks while being carried on a firm paper backing.
The hook and loop backing on this general purpose production paper allows quick attachment to hook and loop pads, so sanding sheets can be changed during sequences without tools.
The 150 grit on this sanding sheet provides a medium-fine cut, so it suits intermediate smoothing, light de-burring, and scouring steps between coarser sanding and later finishing work.
The 3 x 4-5/16 inch size gives a compact sanding area, so the sheet is useful on smaller surfaces, edges, and narrow parts where control is more important than wide coverage.
The 4-hole layout on this sheet aligns with compatible vacuum-style pads, so dust can move through the sheet face and reduce loading on the abrasive during sanding passes.
This Dynabrade sheet is described for general purpose production use, light de-burring, and scouring, so it fits day-to-day cleanup and refinement work in abrasive sheet applications.
The Dynabrade 150 Grit 4-Hole Hook & Loop Sanding Sheet brings together medium-fine 150 grit, aluminum oxide on C-weight paper, a 3 x 4-5/16 inch footprint, and hook and loop backing, so it fits general purpose production sanding where control and quick sheet changes are important. Its use for light de-burring and scouring makes it a practical choice for cleanup and refinement passes on many shop or jobsite sanding tasks. Choosing this Dynabrade abrasive sheet through Wurth Baer Supply connects that performance to a supplier focused on the woodworking industry.
Sold In: 1 Package