Knape and Vogt PSF Series White 14"L x 2"D x 3"H x Sink Tip Out Tray, No Tab Stop - PSF14SH-2-W

Knape And Vogt PSF Sink Tip Out Tray Use

Knape and Vogt PSF sink tip out tray describes a plastic sink tip-out tray from the KV PSF Series, giving a defined option when building storage behind a sink false front. The tray is listed at 14 inches long, 2 inches deep, and 3 inches high, so it is sized for false fronts in that width range where shallow depth is needed in front of the sink bowl. The product is identified as a sink tip out tray in the Sink Tip Out Trays and Accessories class, so it is intended for mounting behind a fixed false drawer front to swing open on hinges. The tray is described as white, which helps it visually match common white cabinet interiors or white fixtures. Being described as plastic indicates a non-metal construction, which affects how it feels in daily use and how it responds to normal moisture around a kitchen or bath sink area.

Key PSF14SH-2-W Details For Cabinet Projects

• The product name specifies a Knape and Vogt PSF Series sink tip out tray, so it falls within a defined family that installers can standardize on across similar sink cabinets for consistent layout.
• The dimensions of 14 inches long, 2 inches deep, and 3 inches high give clear guidance for fitting behind a sink false front, which helps plan rail spacing and hinge placement on the cabinet face.
• The SAP description notes the tray as FALSEFRONTTRAY,WHITE, tying it directly to false front applications and a white finish that coordinates with many light-colored interiors and trim pieces.
• The web description states KV's line plastic sink tip-out tray kits are available only in white, so color decisions are straightforward when matching other white components in the same cabinet run.
• The same description explains tray kits are available in Slim (1-5/8 inch) and Standard (2 inch) depths, so this 2 inch depth variant aligns with the Standard depth option when planning uniform storage space across multiple sink openings.

Sink Tip Out Tray Fit And Layout Details

The PSF14SH-2-W sink tip out tray uses a stated 14 inch width, which matters when aligning the tray span to a sink base false drawer opening so that the tray does not interfere with neighboring fronts. The 2 inch depth listed in the product name ties to the Standard depth called out in the series description, so installers know how far the tray projects into the cabinet cavity in front of bowls or plumbing. The 3 inch height provides a defined vertical profile, which affects where to position the tray relative to the top and bottom rails of the false front frame. Knowing that tray kits in this PSF Series use scissor hinges at 40 degrees informs how the front will swing and how much clearance the front edge of the tray sees as it tips forward.

Using This PSF Series Sink False Front Tray

Where The PSF14SH-2-W Tray Is Applied

The manufacturer part number PSF14SH-2-W identifies this unit as part of the Knape and Vogt PSF Series, placing it in a line focused on sink tip out trays for kitchen and bath cabinet work. The category listing as Kitchen & Bath Cabinet Accessories and the product class of Sink Tip Out Trays and Accessories position it specifically for use behind sink false fronts rather than general drawer storage. Its 14 inch length works in cabinet openings of similar width, helping align the tray span with a typical single wide false front above a sink. The 2 inch depth, referenced as a Standard depth within the PSF line, is sized to sit just inside the cabinet face without reaching deeply into the sink base where plumbing or bowls are located. The white color named in both the product name and SAP description coordinates with other white interior components commonly used by shops outfitting multiple sink bases on the same job.

Details That Help Repeatable Installation Results

The PSF14SH-2-W sink tip out tray is described as plastic, which keeps the tray body lightweight as it tips with the front, affecting hinge motion and reducing load on the scissor hinges used in the PSF tray kits. The 3 inch height listed in the name helps installers center the tray vertically behind the false front so that the opening reveals enough of the tray edge for access while respecting the top and bottom rail clearances. The connection to the PSF Series, with scissor hinges operating at 40 degrees in the tray kits, means the movement arc is predictable from one sink base to another, reducing layout guesswork across a run of cabinets. The Standard 2 inch depth also provides a repeatable measure for positioning plumbing or nearby components so that the tipping motion has clear space during use.

Common Questions About The PSF14SH-2-W Tray

Selecting This Tray For Sink False Front Work

The Knape and Vogt PSF Series white 14 inch by 2 inch by 3 inch sink tip out tray, part number PSF14SH-2-W, gives cabinet shops a defined Standard-depth option for sink false front layouts. Its plastic construction, PSF Series movement at 40 degrees, and sizing tailored to typical sink openings provide known dimensions when planning face frame spacing and interior clearances. For projects calling for a white, Standard-depth PSF Series sink tip out tray, this model aligns with that requirement and supports consistent setups across multiple kitchen or bath installations.