
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock free swinging 3/4 overlay non-mortise hinge describes a hinge built to handle a 3/4 inch overlay door without cutting a mortise, so a face-frame cabinet door can be mounted with less door and frame prep. The PK3180TBG10 manufacturer part number ties the hinge to Amerock Corporation, which helps keep reorders and job specs consistent across projects. Its semi-concealed hinge design leaves part of the hinge visible, so the hardware still contributes to the finished cabinet look while most working parts stay out of sight. Being a non-mortise hinge means the leaves sit on the surface instead of recessed, which can shorten installation time when working through a run of cabinets. As a screw-on hinge style, it uses screw fasteners to secure to the cabinet and door, supporting straightforward installation with standard tools.
This Amerock semi-concealed hinge is a screw-on design, so it fastens to the cabinet and door using screws driven through its leaves, keeping the workflow centered on drilling pilot holes and driving fasteners. Its non-mortise hinge classification means the leaf thickness is intended for surface mounting, which removes routing or chiseling steps from the installation sequence on face-frame cabinets. As a 3/4 inch overlay hinge, its geometry is built so the mounted door overlays the frame by that amount, guiding layout when marking hinge locations along the stile. The hinge belongs to the semi-concealed face-frame hinge category, indicating it is shaped for use on face-frame cabinetry, which aligns with many kitchen, bath, and shop cabinet builds using framed construction.
This Amerock Corporation hinge sits in the semi-concealed face-frame hinge class, placing it in projects that use framed cabinet construction. Its 3/4 inch overlay rating suits doors designed to cover most of the face-frame stile, fitting layouts where the door edge steps past the opening. Because it is a non-mortise hinge, it works in cabinet builds where the frame and door edges remain intact without recessing for hinge leaves, which can be practical in both shop-built and jobsite-modified cabinets. The satin nickel finish positions the hinge in jobs that specify satin nickel decorative hardware, helping match the hinge appearance to pulls and knobs specified under the same finish family.
This hinge uses a free swinging design, allowing the door to move through its swing without spring action from the hinge, which can help when a project calls for doors that stay in position based on catches or other hardware. The ball tip on the hinge brings a small but defined decorative end to the visible knuckle, which can help keep exposed hinge sections visually aligned with more traditional or detailed cabinet styles. Its manufacturer part number PK3180TBG10 links directly to Amerock documentation, supporting repeat ordering for service work or matching existing installations in the same job. The semi-concealed format leaves part of the hinge visible, which aids visual alignment of a door row because installers can read hinge lines against the face frame while adjusting fit.
The Amerock PK3180TBG10 hinge is classified as a semi-concealed face-frame hinge, so it is intended for use on face-frame style cabinet construction.
The Amerock PK3180TBG10 hinge is specified as a 3/4 inch overlay hinge, so it is designed for doors that overlay the cabinet face frame by 3/4 inch.
The PK3180TBG10 hinge is identified as a non-mortise hinge, so it is intended for surface mounting without routing recesses into the frame or door edges.
The PK3180TBG10 hinge is described as satin nickel, giving the visible portions of the semi-concealed hinge a satin nickel appearance on the cabinet.
The hinge is specified as a ball tip hinge, so the ball-shaped finials provide a decorative end to the visible hinge knuckle on the cabinet.
The PK3180TBG10 semi-concealed hinge is produced by Amerock Corporation, aligning it with Amerock-branded cabinet hardware lines.
The Amerock PK3180TBG10 hinge combines a 3/4 inch overlay layout, non-mortise construction, and semi-concealed face-frame design, aligning with many framed cabinet projects. Its satin nickel ball tip style pairs with satin nickel hardware programs. When a job calls for a free swinging, screw-on Amerock hinge in this configuration, this model offers a defined part number for planning new installations and matching existing work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each | AMCM9765F-PT Mfr# CM9765FPT | 9765 Magnetic Catch for Full Inset, Tan |