Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Bungalow knob gives cabinets and furniture a satin nickel pull point sized for everyday use, with a 1-3/4 inch length and 15/16 inch width that provide a solid grip while keeping a compact footprint on doors and drawers. The knob is built from zinc die cast material, which creates a consistent shape that seats cleanly on the surface and supports repeatable layout across multiple fronts. Its satin nickel finish matches the KNOB, SATIN NICKEL description and works wherever a soft metallic look is needed in the job. A 1 inch projection brings the hand away from the cabinet face enough for fingers to wrap behind the profile without crowding surrounding fronts in tight banks. The 1-1/16 by 1/2 inch base measurement gives installers a defined bearing surface that helps the knob sit stable on the panel.
The 1-3/4 inch length on this Belwith Keeler knob simplifies layout because installers can center the pull on narrow drawer fronts while still giving users a solid contact point. Its 15/16 inch width keeps the footprint narrow, which matters when knobs sit near inside edges or face frame reveals. With a 1 inch projection, the knob stands off the panel enough to clear finger joints as drawers open, helping reduce accidental contact with the cabinet face. The 1-1/16 by 1/2 inch base defines a stable landing on the panel, so once the mounting hole is drilled the knob seats consistently and resists rotation during normal use.
This Bungalow collection cabinet knob, under manufacturer part P2151-SN, is sized for standard cabinet doors and drawers where a 1-3/4 inch pull point suits residential or shop-built casework. The satin nickel finish coordinates with other satin nickel decorative hardware and moldings in the same Belwith Keeler and Hickory Hardware families, allowing installers to run a single finish across hinges, pulls, and knobs. As a knob in the Decorative Hardware & Moldings category, it works on face-frame or frameless cabinet fronts where a compact shape is preferred over longer pulls. The 1 inch width and base dimensions support use on rails, stile edges, or drawer centerlines without covering too much of the visible panel.
The 8-32 x 1 inch screw size defines the thread and length used with this knob, so drilling patterns and pilot preparation can be standardized across a run of cabinets. With a 1 inch projection, installers can keep consistent standoff from the face, which helps doors and drawers line up visually when multiple fronts are fitted in a bank. The 1-3/4 inch length and 15/16 inch width make it easy to align the knob square to door edges or drawer rails using simple edge measurements. Zinc die cast construction keeps each knob dimensionally similar, supporting consistent reveals and spacing across large jobs. The defined 1-1/16 by 1/2 inch base helps installers sight straight lines along upper and lower cabinets for a clean finished layout.
The P2151-SN knob measures 1-3/4 inches in length and 15/16 inch in width, giving a compact pull area that works well on standard cabinet doors and drawers.
The satin nickel knob has a 1 inch projection, providing enough clearance for fingers to grip behind the knob while keeping the profile tight to the cabinet.
The Hickory Hardware Bungalow knob is made from zinc die cast material, giving a solid, consistently shaped body suited to repeated opening and closing.
The Belwith Keeler cabinet knob uses an 8-32 x 1 inch screw size, so hole drilling and thread selection can follow that standard measurement on cabinet fronts.
The cabinet knob has a base measurement of 1-1/16 by 1/2 inch, creating a defined bearing surface that helps the knob sit stable against the cabinet panel.
The P2151-SN satin nickel knob is part of the Bungalow collection from Hickory Hardware, allowing coordinated use across matching decorative hardware pieces.
The Hickory Hardware Bungalow Series satin nickel 1-3/4 inch by 15/16 inch knob from Belwith Keeler brings a defined size, 1 inch projection, and zinc die cast construction that align well with cabinet and furniture work. With a KNOB, SATIN NICKEL finish and a 1-1/16 by 1/2 inch base, it supports clean, repeatable layouts on drawers and doors. The standardized 8-32 x 1 inch screw size further supports consistent installation across projects. Use this knob when a compact satin nickel pull point is required on new builds or hardware refresh jobs.
Sold In: 1 Each
