Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Bungalow knob identifies this piece as part of the Bungalow collection, so it visually matches other Bungalow Series cabinet hardware on a project where a consistent style matters. The knob is described as Windover Antique, giving it a specific finish identity that helps align the look with existing decorative hardware on cabinets or furniture runs. The material is zinc die cast, which creates a solid molded body that keeps the knob uniform across multiple doors and drawers in a job. The length or diameter is 1-3/4 in (44 mm), giving a full-size hand grip that helps with everyday door and drawer operation. Width is stated as 1 in, so the footprint across the face of the cabinet remains compact while still providing finger contact for pulling. The base measurement of 1-1/16 in x 1/2 in defines the contact area against the cabinet surface, helping with layout around rail, stile, and panel details.
This knob has a length or diameter of 1-3/4 in (44 mm), so its face covers modest surface area while still fitting comfortably on typical cabinet doors and drawer fronts. The 1 in width keeps the front profile narrow, which helps when spacing multiple knobs along a drawer bank or lining up hardware on narrow stiles. The projection is stated as 1 in, defining the distance from cabinet face to front of the knob, so installers can anticipate finger clearance and how far hardware will extend into walkways. A base measurement of 1-1/16 in x 1/2 in sets the footprint at the mounting point, which matters when laying out centerlines on frames or when aligning with existing drill locations. The specified screw size is 8-32 x 1 in, tying the knob to a standard cabinet knob thread, which simplifies selection wherever existing 8-32 holes are used.
The Web Description identifies this product as part of the Bungalow collection, so it naturally fits projects that already use Bungalow Series pulls or other matching decorative hardware. The category listing as Knobs, Belwith and Decorative Hardware & Moldings|Knobs places it directly in the cabinet and furniture hardware space, which suits use on kitchen cabinets, bath vanities, or built-ins that need a defined knob style. The 1-3/4 in (44 mm) length or diameter works well on both doors and drawers because it provides a sizable grip on wider fronts without overwhelming narrower faces. With a 1 in projection, the knob stands off the surface enough to grasp when mounted near adjacent doors or appliances, while still keeping the hardware close to the case. The base measurement of 1-1/16 in x 1/2 in makes it a good match for typical face-frame and frameless door layouts where the contact area must sit cleanly on the finished surface.
The Manufacturer Part # P2151-WOA gives a precise identifier, so specifying this exact knob across drawings and orders helps keep all openings on a project matched. The zinc die cast material produces uniform castings, which supports consistent knob shape and feel from door to door and drawer to drawer. The combination of 1-3/4 in diameter and 1 in width sets a known front profile, helping installers repeat drilling locations and maintain visual balance along cabinet runs. The 1 in projection defines how far the knob sits from the surface, giving a repeatable distance that keeps finger clearance the same across all installed pieces. The base size of 1-1/16 in x 1/2 in creates a predictable footprint, so layout marks can be referenced from edges and rails to maintain alignment. The specified screw size of 8-32 x 1 in ties into standard cabinet knob threaded holes, which supports straightforward swap-outs or matching on jobs that follow common knob drilling practices.
The knob has a stated length or diameter of 1-3/4 in (44 mm), width of 1 in, and a projection of 1 in, giving a compact but full-size grip for typical cabinet doors and drawers.
The knob is described as zinc die cast, meaning the body is cast from zinc, which provides a solid, molded form that keeps sizing and shape consistent across multiple pieces.
The Web Description lists the finish as Windover Antique, so the knob presents that specific antique-style look to coordinate with matching decorative hardware finishes.
The Web Description specifies an 8-32 x 1 in screw size, so the knob is threaded to accept this standard cabinet knob screw dimension during mounting.
The base measurement is 1-1/16 in x 1/2 in, defining the contact footprint on the cabinet surface for layout along rails, stiles, or panel details.
The Manufacturer Part # is P2151-WOA, which identifies this exact Windover Antique Bungalow knob for drawings, specifications, and repeat ordering.
The Hickory Hardware Bungalow knob in Windover Antique finish combines a 1-3/4 in diameter, 1 in projection, and a 1-1/16 in x 1/2 in base, giving clear size and footprint details for cabinet layouts. With zinc die cast construction and an 8-32 x 1 in screw size, it aligns with common cabinet knob dimensions, making it straightforward to specify wherever a Bungalow collection knob and Windover Antique finish are required.
Sold In: 1 Each
