Bungalow zinc die cast pull gives cabinets and drawers a rectangular pull option that matches straight-line layouts. Its beveled edges break the square profile slightly, which softens the touch point while keeping a crisp, geometric look on doors and fronts. The Windover Antique finish provides a darker, aged tone on the zinc die cast material, so it reads as a traditional color while working with contemporary shapes. The pull belongs to the Bungalow collection, tying multiple doors and drawers together visually when the same series is used across a run of cabinets. With a length of 5-5/8 inches, the pull spans a good portion of the rail, which helps larger drawers feel proportional. A projection of 1 inch gives fingers clearance without sticking too far off the face, which supports tight kitchen or bath layouts.
This Belwith Keeler pull is specified with center-to-center options of 3 inches and 3-3/4 inches, so projects that already use these common spreads can align drilling patterns with the pull design. Using these specified center-to-center dimensions keeps mounting holes consistent from door to door, which helps rows of cabinets track straight visually. The 5-5/8 inch overall length gives enough bar beyond the mounting points to look balanced on both smaller and mid-size fronts. A 1 inch projection keeps the hand clear of the cabinet surface when pulling, limiting finger contact with the finish on doors and drawer faces during regular use. The Windover Antique finish on the zinc die cast pull creates contrast against lighter cabinet colors, which can help installers and owners quickly see handle locations in lower-light areas.
The Bungalow series pull is designed as a rectangular cabinet and drawer pull, which works well wherever straight cabinet lines are part of the layout. Its beveled edges complement doors and drawer fronts that have square profiles, so the hardware follows existing geometry instead of introducing curves. With a length of 5-5/8 inches, the pull suits both doors and medium-width drawers, supporting consistent hardware use across upper and lower cabinets. The Windover Antique finish lets the same pull function in spaces that lean traditional or transitional, because the darker tone can echo other aged-metal details. A width of 1-1/16 inches keeps the pull visually substantial on face frames and frameless cabinets while staying narrow enough for tight stile or rail dimensions.
The specified 3 inch and 3-3/4 inch center-to-center dimensions guide drilling patterns for the Bungalow zinc die cast pull, which helps maintain straight handle rows along banks of doors and drawers. When those center-to-center measurements are followed, the 5-5/8 inch overall length positions equal material beyond each fastener point, giving a balanced look on each front. The 1 inch projection defines how far the grip stands off the cabinet face, which keeps the hand clear of surrounding trim while limiting how much the pull extends into walk paths. The zinc die cast construction holds the rectangular profile with sharp edges, so alignment against door edges or drawer lines appears clean when multiple pulls are installed. The combination of a 1-1/16 inch width and beveled edges gives a consistent visual margin from the pull to nearby panel edges, which supports repeatable results across a full kitchen or bath.
The Bungalow zinc die cast pull has a length of 5-5/8 inches, a width of 1-1/16 inches, and a projection of 1 inch, so it creates a substantial handhold without extending far from the cabinet face.
The Windover Antique pull is specified with 3 inch and 3-3/4 inch center-to-center dimensions, letting it align with common drilling patterns used on many cabinet and drawer fronts.
The Windover Antique finish gives the zinc die cast pull a darker, aged appearance, which contrasts well with lighter cabinets and pairs with traditional or transitional room finishes.
The Belwith Keeler Bungalow pull is made from zinc die cast material, allowing its rectangular shape and beveled edges to be formed with precise, consistent lines on each piece.
The 1 inch projection sets the pull slightly off the cabinet face, giving fingers clearance for a solid grip while keeping the handle from extending too far into walkways or tight spaces.
The part number P2153-WOA identifies this specific Bungalow series pull in the Windover Antique finish, helping match existing installations or specify the same hardware across multiple cabinets.
The Belwith Keeler Bungalow zinc die cast pull in Windover Antique pairs a rectangular profile with beveled edges, so it suits straight-line cabinet layouts that need a defined yet simple handle. Its 5-5/8 inch length, 1-1/16 inch width, and 1 inch projection give a consistent grip across doors and drawers. With specified 3 inch and 3-3/4 inch center-to-center dimensions, this pull matches common drilling patterns, which supports uniform hardware alignment on projects using cabinets from Wurth Baer Supply.
Sold In: 1 Each
