Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Lido Designs closet rod and shelf brackets combine a shelf holder and a pole bracket in one piece, so a single bracket supports both the shelf and the hanging rod in a closet run. The design supports shelves up to 12 inches wide, allowing typical closet shelving depth while keeping the load within the bracket's rated range for stable storage. Each bracket also supports up to a 1-1/2 inch diameter rod or dowel, so it handles common closet pole sizes without slop at the connection point. The brackets are rated at 150 lb per pair, giving a clear load reference when laying out shelf spans in a closet or storage area. Construction in steel provides a solid structural base for this rating, aligning the bracket material with the load requirement. The polished chrome finish creates a consistent, finished look when used with chrome closet rods and visible closet interiors.
The closet shelf and rod brackets are designed around a 12 inch shelf depth, so installers can size shelving to that depth and keep the load centered over the bracket support. Capacity for a 1-1/2 inch diameter rod or dowel means the bracket opening is intended for that specific size, which guides selection of the rod for a snug fit. The 150 lb per pair rating gives a reference when determining how many brackets to use along a closet run so the installed system stays within the stated load range. Since each bracket is steel, fastening it securely to suitable wall structure lets the material work as intended under load.
These Lido Designs polished chrome closet rod and shelf brackets are suited to closet and storage layouts where both a hanging rod and a shelf run together along the wall. Because each bracket doubles as a shelf holder and a pole bracket, it supports the horizontal shelf surface while also carrying the hanging rod directly beneath, which simplifies bracket placement across the span. The 12 inch shelf depth support means they fit closet designs using shelves of that width, from reach-in layouts to utility storage sections, keeping the shelf footprint aligned with the bracket geometry. The 1-1/2 inch rod diameter capacity positions these brackets for use with rods or dowels of that size in bedroom closets, coat closets, or similar hanging areas where a standard pole diameter is preferred. With a polished chrome finish over steel, they visually match chrome closet rods in open or partially open storage where hardware is visible.
The 150 lb per pair rating on these closet shelf and rod brackets provides a fixed value for planning bracket spacing, so installers can repeat a spacing pattern across multiple closet sections while keeping each pair within that load reference. Steel construction supports that rating by giving a stiff connection point, which helps maintain shelf alignment when weight is placed on the shelf or on the hanging rod. The 12 inch shelf width capacity guides material selection for shelving, helping keep the load centered above the bracket rather than extending significantly beyond the support point. The 1-1/2 inch rod or dowel capacity standardizes the interface between bracket and pole, so multiple closet areas can be built around the same rod diameter and bracket combination. By combining the shelf holder and pole bracket functions, each bracket reduces the number of separate support parts required along the wall, which can simplify layout, drilling, and mounting steps during repeat installations.
The Lido Designs closet rod and shelf brackets are designed to support shelves up to 12 inches wide, so shelving can be sized to that depth for proper support.
The LB-10-8150A bracket is designed for up to a 1-1/2 inch diameter rod or dowel, so rods of that diameter fit the bracket opening.
These closet shelf and rod brackets are rated at 150 lb per pair, giving a load reference when planning bracket spacing along a closet run.
These polished chrome closet rod and shelf brackets are made from steel, providing the structural base that supports the stated load rating.
These closet brackets double as a shelf holder and pole bracket, so the shelf rests on the bracket while the rod or dowel is supported below.
The LB-10-8150A closet bracket is described as polished chrome, matching chrome-finished closet rods and hardware.
Lido Designs polished chrome closet rod and shelf brackets bring the shelf support and rod support into one steel component, which suits closet runs where a 12 inch shelf and a 1-1/2 inch diameter rod are planned together. The 150 lb per pair rating provides a concrete load figure for laying out bracket spacing in residential or light storage closets. When a project calls for polished chrome hardware and a combined shelf-and-rod layout, this bracket style aligns the material, finish, shelf depth, and rod diameter into a single, unified support choice.
Sold In: 1 Each