Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 3150 Series stemware rack mounts to the underside of a wall cabinet and holds stemmed glasses inverted, keeping a wine glass collection organized and within reach while clearing counter and shelf space below.
Stemmed glasses stored on open shelves take up a disproportionate amount of cabinet real estate, and left on the counter they are exposed to knocks. Mounting this rack to the underside of a wall cabinet flips that equation: glasses hang by their bases, protected and out of the way, while the shelf below remains open for everyday use. The 18-inch depth gives each glass a stable cradle from front to rear, so the rack does not tilt or allow bottles to slide forward when the door is opened nearby.
The Satin Nickel finish sits in a useful middle ground in the hardware palette. It reads as modern without the mirror quality of polished chrome, and it pairs naturally with stainless appliances, brushed nickel pulls, and mixed-metal kitchens where one finish dominates and others accent. The steel frame carries the finish well and resists the everyday contact that comes with a glass storage application. At 4-1/4 inches wide, this is a narrower rack than the wider configurations in the 3150 Series, which makes it the right fit for a single cabinet section, a divided run, or a bar area where cabinet width is limited. Confirm the minimum opening dimensions against your cabinet before ordering: 18-1/4 inches of depth and 1-5/8 inches of height are required for the rack to mount flush and function correctly.
This rack is a practical fit for a kitchen wine station, a butler's pantry, or a wet bar where wall cabinet space is available and the goal is to get stemware off the counter without buying a separate furniture piece. Designers specifying hardware for a full kitchen will find the Satin Nickel finish aligns with brushed-nickel pull and hinge selections, keeping the accessory hardware consistent. Cabinet shops building custom bar cabinetry can use this rack to add a finished stemware solution in a narrow upper cabinet opening. Homeowners setting up a dedicated wine or entertaining area get a clean, practical answer to the common problem of no good place to put the glasses.
It mounts to the underside of a wall cabinet so glasses hang inverted by their bases. Mounting hardware requirements should be confirmed against the installation instructions included with the rack.
Satin Nickel is a brushed, mid-tone silver finish. It coordinates well with brushed nickel, stainless steel, and similar matte silver hardware families. If your existing pulls or hinges are polished chrome or a warm-toned brass, check a physical sample against your installed hardware before committing.
Yes. The Rev-A-Shelf 3150 Series includes configurations in additional widths. If your cabinet opening is wider than 4-3/8 inches, a wider rack in the same series will fill the space more completely while keeping the finish consistent.
The rack requires a minimum opening depth of 18-1/4 inches, a minimum opening height of 1-5/8 inches, and a minimum opening width of 4-3/8 inches. Measure before ordering to confirm the fit.
Choose this Rev-A-Shelf 3150 Series rack in Satin Nickel to turn the underside of a wall cabinet into organized, protected stemware storage that keeps glasses accessible and the counter below free.
Sold In: 1 Each
