Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf stemware rack gives you a dedicated way to store hanging wine glasses under a cabinet or shelf area while keeping the mounting point out of view. This brand-specific metal stemware rack is the Rev-A-Shelf 3450 Series model 3450-11SN, finished in satin nickel and sized at 11 inches deep, 17 inches wide, and 1-1/2 inches high. The one-piece four row design helps organize multiple glasses in a compact storage zone. Heavy 8mm gauge wire construction supports a rigid holder layout for stemware. Buyers searching for RS3450-11SN often want a wine glass rack that keeps glasses accessible, uses a clean satin nickel finish, and fits cabinet projects where visible hardware is not desired.
Key specs to confirm: This Rev-A-Shelf stemware rack is listed as 11 inches deep, 17 inches wide, and 1-1/2 inches high. It is a one-piece four row metal rack with heavy 8mm gauge wire construction and a satin nickel finish. Before purchase, confirm the inside cabinet or shelf mounting area, the front-to-back clearance for your glasses, and the spacing needed to slide stems in and out comfortably. If you need safety, load, or compliance details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified information shows the product is sold as each. The listing identifies one Rev-A-Shelf 3450 Series satin nickel stemware rack. Mounting hardware and additional components should be confirmed before ordering.
What to verify before ordering: Check your available mounting width and depth, the style and bowl size of your glasses, the number of rows you want in one holder, the finish match with nearby hardware, and whether your installation surface is suitable for concealed-looking mounting points.
This under cabinet stemware rack fits buyers who want to move wine glasses out of a cabinet shelf and into a dedicated hanging position. In a kitchen, butler pantry, or bar area, glasses often get stacked, shifted, or placed on shelves where stems can tangle and bowls can touch. A four row wine glass rack addresses that by giving each glass a guided path into place. The Rev-A-Shelf stemware rack is built as a one-piece unit, so buyers planning a neat storage layout can install one rack rather than align multiple separate rows.
The 11 inch depth matters for real projects because front-to-back cabinet space can be limited. Buyers should compare that depth with the shape of their wine glasses and the position of doors, face frames, or adjacent shelving. The 17 inch width also helps when planning whether the rack will fit within the underside of a cabinet, shelf, or bar structure. Since the product height is 1-1/2 inches, installers can also account for vertical clearance before mounting.
The satin nickel stemware rack finish is useful when the project already includes nickel-toned hardware. The heavy 8mm gauge wire construction gives the metal stemware rack a rigid format that suits repeated use in active kitchen and entertaining spaces. Another practical point is the concealed appearance of the mounting arrangement. The product is designed to mount without the mounting point in view, which helps when the rack will be visible below a cabinet.
For buyers searching by model, RS3450-11SN is the satin nickel version in this listing. If you are matching other finishes or looking at related storage options, the 3450 series is also described as available in chrome, brass, and oil rubbed bronze, but this page is specifically for the satin nickel holder. Before ordering, confirm your glass base and bowl dimensions, because the listing does not provide exact channel spacing for stem sizes.
When comparing a metal stemware rack, buyers usually focus on three things: layout, finish, and install appearance. This Rev-A-Shelf wine glass rack gives a defined answer on all three. The layout is a one-piece four row format. The finish is satin nickel. The installation style is described as mounting without the mounting point in view. Those are concrete details that help narrow choices when many racks look similar at a glance.
Another comparison point is construction. This product is described as heavy 8mm gauge wire construction, which gives buyers a specific build detail instead of a vague material claim. The listed dimensions also make comparison easier because you can measure your cabinet area against 11 inches deep by 17 inches wide by 1-1/2 inches high. That is especially useful for installers who need to avoid ordering a rack that overhangs a face frame or crowds nearby storage.
Brand consistency can also matter in cabinet accessories. Rev-A-Shelf is clearly identified as the manufacturer and brand for this stemware holder, which helps buyers who want matching accessory lines or who already specify that brand in woodworking and cabinet projects. Since the product data does not include load rating, mounting hardware details, or glass capacity by size, those are the main points to verify before final purchase. Using the verified dimensions and construction details first will help you compare options on fit rather than assumptions.
This Rev-A-Shelf stemware rack is designed to mount beneath a surface, such as a cabinet or shelf area, with the mounting point not in view.
The RS3450-11SN stemware rack is 11 inches deep, 17 inches wide, and 1-1/2 inches high.
This wine glass rack is a one-piece four row model.
This holder is made for stemware, but exact glass fit should be confirmed because channel spacing and supported glass sizes are not provided in the verified data.
The product listing verifies the rack is sold as each, but included mounting hardware is not specified and should be confirmed before ordering.
This under cabinet stemware rack uses a satin nickel finish.
The rack is a metal stemware rack made with heavy 8mm gauge wire construction.
This glass rack requires checks for mounting width, cabinet depth, glass bowl clearance, and access to slide glasses in and out. Follow manufacturer installation guidance and local building requirements where applicable.
Satin nickel stemware rack selection starts with fit. This Rev-A-Shelf 3450 Series holder gives you a verified 11 inch depth, 17 inch width, 1-1/2 inch height, four row layout, and heavy 8mm gauge wire construction in a satin nickel finish. The listing confirms it is sold as each and designed to mount without the mounting point in view. Before purchase, confirm your cabinet mounting area, the size and style of the glasses you plan to store, and whether mounting hardware is included for your installation plan.
Sold In: 1 Each
