Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 3953 Amber Maple is a Doellken Woodtape PVC edge banding designed to cover and protect exposed panel edges, so cabinet and fixture projects finish with a consistent Amber Maple appearance. The .018 inch thickness provides a low-profile edge that blends closely with sheet goods, supporting clean visual transitions on cabinet sides, shelves, and doors. The 7/8 inch width gives coverage for common panel thicknesses while leaving workable trim allowance, which helps dial in flush edges with standard edgebanding tools. This Amber Maple version aligns with wood-toned projects that call for a warmer maple look. The long-run format described as 1200FT/RL supports production workflows where extended footage on a single roll reduces mid-job changeover. As a PVC edgebanding from the Edgebanding & Surfacing category, it suits woodworking environments focused on consistent color and repeatable results across multiple panels.
This Doellken Woodtape edge banding uses a 7/8 inch width, giving installers working room to trim both faces down to the panel surface while keeping full coverage across common substrate thicknesses. The .018 inch thickness keeps the edge light and unobtrusive, which matters when matching laminate or thin-surface panels where a bulky edge could stand proud. As PVC edge banding in the Edgebanding & Surfacing category, it is suited to standard cabinet and casework processes that rely on banding narrow edges of panels cut from larger sheets. The Amber Maple color orientation supports projects built around maple tones where visual alignment from face to edge is important across multiple components.
This edge banding is positioned in the Edgebanding & Surfacing category as PVC Edge Banding, which makes it a natural fit wherever exposed panel edges need covering on cabinets, furniture, or built-ins. The Amber Maple color direction suits installations where a maple appearance carries across tops, sides, and fronts, so the edge does not visually interrupt the run of grain or tone. At 7/8 inch wide, it works along straight panel edges that fall within common thickness ranges used in shop-built casework, letting fabricators process shelves, verticals, and door edges on the same roll. The .018 inch thickness keeps the edge visually tight, which supports projects that rely on close color and profile matching to adjacent laminate or veneer surfaces without a bulky transition.
The manufacturer part number 3953-1418-2 uniquely identifies this Doellken Woodtape Amber Maple edge banding, which helps shops repeat the same selection whenever additional material is required for follow-up work or matching replacements. The SAP description 7/8X.018 EB, AMBER MAPLE 1200FT/RL ties width, thickness, color, and roll length together, so purchasing and production reference the same configuration during planning. Being listed as Edge Banding within the broader Edgebanding & Surfacing lineup keeps this product clearly positioned for edge finishing tasks rather than general surfacing, which helps crews route it directly to edgebanding stations. The web description noting Color Match with Nevamar WM8340 Clear Maple T_Textured - Good signals a targeted visual relationship to that specific surface, which matters when aligning panel faces and edges so finished runs read as one coordinated system on site or in the shop.
Edgebanding 3953 Amber Maple is a Doellken Woodtape PVC edge banding used to cover exposed edges on panels, so cabinet and fixture components present a finished Amber Maple look.
This Amber Maple edge banding is 7/8 inch wide and .018 inch thick, giving coverage for typical panel thicknesses while keeping a slim edge that trims closely to the surface.
The 3953-1418-2 part number identifies this specific Doellken Woodtape Amber Maple edge banding configuration, which supports reordering the same width, thickness, and color for future work.
This edge banding has a Color Match note to Nevamar WM8340 Clear Maple T_Textured - Good, aligning its Amber Maple tone to that referenced surface for coordinated projects.
This product is classified as PVC edge banding within the Edgebanding & Surfacing category, positioning it for covering panel edges in woodworking applications.
The 1200FT/RL description indicates a long-run roll format, which supports extended production runs on edgebanding equipment with fewer roll changes.
Edgebanding 3953 Amber Maple from Doellken Woodtape combines .018 inch thickness, 7/8 inch width, and Amber Maple color in a single 1200FT/RL configuration, so shops can standardize on one PVC edge solution for matching maple-toned projects. The Color Match reference to Nevamar WM8340 Clear Maple T_Textured - Good supports projects built around that surface, while the defined manufacturer part number 3953-1418-2 streamlines specifying and reordering. For cabinet, fixture, or furniture runs that rely on a coordinated Amber Maple edge, this Edge Banding option from the Edgebanding & Surfacing category keeps material selection aligned to the visual target.
Sold In: 1200 Lineal Ft