Edgebanding 4498P Amber Maple 3mm identifies this Doellken Woodtape PVC edge banding as a 3mm thick solution suited to covering exposed panel edges, so cabinet and furniture projects gain a finished front that matches Amber Maple surfaces. The 15/16 inch width gives enough coverage for common panel thicknesses while allowing a clean trim line along both faces, which helps installers produce straight, professional edges in fewer passes. The 3mm thickness creates a more substantial edge profile than thin tape, adding visual depth along doors, drawer fronts, and shelving runs. Being part of the Edgebanding & Surfacing category aligns this product with laminate and similar panel work, so it fits naturally into casework, commercial fixtures, and residential cabinetry built around decorative surfaces. The Amber Maple color reference in the product name supports color coordination wherever matching 4498P Amber Maple designs is required.
The 15/16 inch width on this Doellken Woodtape PVC edge banding provides modest overhang on many panel configurations, which supports straight trimming along the faces after bonding. That extra fraction of an inch helps compensate where panels vary slightly, keeping the finished edge tight to both surfaces without exposing the core. The 3mm thickness builds a firm front edge that stands up visually against panel faces, giving fabricators more material to flush without cutting through. Because it sits in the Edgebanding & Surfacing class, this strip aligns with standard edge banding tools and methods used on laminate panels, allowing installers to integrate it into their existing equipment setups and production flow.
This Edgebanding 4498P Amber Maple 3mm Thick x 15/16 inch Width works wherever a PVC edge is needed to finish exposed panel cores in Amber Maple designs, such as cabinet cases, doors, and drawer fronts. Its Amber Maple designation connects it visually to matching decorative surfaces, which supports long, continuous runs across upper and lower cabinets without abrupt color shifts. In the Edgebanding & Surfacing category, it aligns with typical laminate and panel-based construction, so shops can apply it along countertops, partitions, and built-ins that share the same finish theme. The 3mm thickness adds definition around openings and vertical dividers, which helps highlight lines in both residential and commercial casework.
The 3mm thickness on this Doellken Woodtape edge banding gives installers more material to work with during trimming and flushing, which reduces the risk of cutting through to the panel and helps achieve a uniform, rounded edge profile. The 15/16 inch width offers enough coverage for standard panel constructions, allowing a bit of tolerance for variations while still trimming back to a tight, clean edge along both faces. The specific manufacturer part number 4498P-1503-1 ties the Amber Maple color and size to one defined product, which simplifies matching during repairs or additions to existing installations using the same design. Being PVC Edgebanding within the Edgebanding & Surfacing category keeps this product in line with common woodworking and cabinet shop practices, so it fits established processes for handling, cutting, and finishing edge treatments on panels.
The Edgebanding 4498P Amber Maple 3mm Thick x 15/16 inch Width has a 3mm thickness, which creates a substantial edge profile and offers installers more material to trim and flush on cabinet components.
The Doellken Woodtape 4498P-1503-1 edge banding is 15/16 inch wide, giving coverage over typical panel edges with some overhang, which supports precise trimming to a clean finished line.
This product is classified as PVC Edgebanding within the Edgebanding & Surfacing category, so it is intended for edge finishing on panel and surfacing projects in woodworking environments.
The 3mm Amber Maple edge banding is produced by Doellken Woodtape, providing a clearly identified source for shops standardizing on specific edgebanding lines.
The 15/16 inch width gives a small margin past the panel faces, allowing fabricators to trim back to a flush, clean edge and reduce visible core material along cabinet fronts.
The 4498P Amber Maple designation links this edge banding to Amber Maple decorative surfaces, supporting consistent color runs and easier matching when expanding or repairing installations.
The Edgebanding 4498P Amber Maple 3mm Thick x 15/16 inch Width from Doellken Woodtape provides a defined combination of thickness, width, and Amber Maple color for panel edge finishing. The 3mm PVC construction and Edgebanding & Surfacing classification align it with cabinet, furniture, and casework projects built around Amber Maple designs. Using the identified 4498P-1503-1 part number keeps future orders consistent, supporting repeatable results across new builds and follow-up work.