EPCO BP Pull 5-1/16" (128 mm) Center to Center, Satin Nickel, BP128-SN

EPCO BP Series 128 Mm Pull For Cabinets

EPCO BP Series 128 mm pull uses a 5-1/16 inch (128 mm) center to center spacing, which sets your drilling layout and keeps handle placement consistent across doors and drawers. The steel construction provides a solid bar-style handle that feels firm in hand during regular cabinet use. A satin nickel finish gives the pull a neutral, brushed look that works across many cabinet colors while helping minor fingerprints blend into the surface. The overall length of 7-3/8 inches establishes the visual scale on the face of the door, so the pull reads as a substantial bar rather than a small knob. A projection of 1-27/64 inches stands the pull away from the door enough for fingers to wrap behind comfortably. With the EPCO BP128-SN part number, this pull sits clearly in the Steel Bar Pull Series, which helps align it with other matching handles in the same collection.

Steel Bar Pull Details That Support Daily Use

• The 7-3/8 inch overall length creates a long gripping area, which spreads hand contact and makes it easier to open wider or heavier cabinet doors with a straight pull.
• The 5-1/16 inch (128 mm) center to center dimension lines up with a common drill spacing, which simplifies layout when repeating the same hole pattern across multiple cabinet fronts.
• The 1-27/64 inch projection holds the bar out from the cabinet face, which gives enough clearance for average adult fingers to hook behind the pull without scraping the door surface.
• The steel material forms a rigid bar, which keeps the handle feeling stable when doors or drawers are operated many times in typical kitchen or shop environments.
• The satin nickel finish provides a muted metallic look, which helps the pull blend into other satin nickel decorative hardware for a consistent appearance across a project.

Mounting Dimensions For Straightforward Handle Layout

The 5-1/16 inch (128 mm) center to center mounting dimension defines the exact spacing between the two holes, which streamlines jig setup and keeps each pull aligned from cabinet to cabinet. The 7-3/8 inch overall length sets where the bar extends beyond the mounting points, which helps with centering the handle visually on doors and drawers. A projection of 1-27/64 inches dictates how far the handle stands proud of the surface, which influences finger access and clearance for hands. The 8-32 screw size specification identifies the thread that engages the pull, which aligns with a widely used machine screw standard in cabinet construction. With the BP128-SN designation, this handle sits within EPCO decorative hardware, which helps keep part selection organized by series during planning.

Using This Satin Nickel Bar Pull In Projects

Where This EPCO BP Series Handle Fits Best

The 5-1/16 inch (128 mm) center to center measurement places this EPCO BP Series handle in a mid-size pull range, which suits many base cabinets and larger drawers where a bar pull is preferred. The 7-3/8 inch overall length gives the bar a balanced proportion on typical kitchen or vanity doors, so it neither overwhelms smaller faces nor disappears on wider fronts. With a projection of 1-27/64 inches, the handle stands far enough from the cabinet face for a firm four-finger grip, which supports frequent opening and closing in busy work areas. The satin nickel finish positions the pull within a common decorative hardware color, which helps coordinate it with other satin nickel pieces in the same room. Being part of the Steel Bar Pull Series places this model alongside other bar-style options in the EPCO catalog, which supports building a consistent handle scheme across different cabinet sizes.

Why These EPCO BP128-SN Details Matter On The Job

The defined 128 mm center to center spacing on the EPCO BP128-SN pull allows jigs or templates to be set once, which reduces layout time and helps every handle line up accurately along cabinet runs. The specified 8-32 screw size threads into the pull body, which lets installers match drilling to a familiar fastener standard during cabinet fabrication. A 7-3/8 inch overall length anchors the pull visually on the door, which helps maintain even margins from panel edges when repeating the same handle across a bank of fronts. The 1-27/64 inch projection establishes a predictable stand-off, which reduces the chance of knuckles rubbing the door as hands close around the bar. The steel construction keeps the bar firm under pull force, which supports repeated daily use on active doors and drawers in kitchens, baths, or shop cabinetry. The satin nickel finish keeps the handle in a matte metallic range, which helps it read cleanly under typical interior lighting without drawing glare.

Common Questions About The EPCO BP128-SN Pull

Selecting This EPCO Pull For Cabinet Projects

The EPCO BP Series 5-1/16 inch (128 mm) center to center satin nickel pull BP128-SN combines steel construction, a 7-3/8 inch overall length, and 1-27/64 inch projection, giving cabinets a substantial bar handle with defined mounting dimensions for repeatable installation across your project.