Wurth #8 x 1-3/4 inch assembly screw gives a flat head, Phillips drive fastener for general assembly work, so you get a screw that sits flush and drives with familiar #2 Phillips bits on cabinets, fixtures, and other builds. The flat head design offers a clean bearing surface in countersunk holes, helping parts draw up tight for solid joints. The #8 size and 1-3/4 inch length create a common combination for joining typical woodworking and shop components where extra bite is needed beyond shorter options. Coarse thread configuration is specified, so the threads engage quickly in softer materials. Zinc finish is stated, providing a basic coated surface that suits many indoor shop, cabinet, and assembly environments. This screw sits in Wurth Baer Supply's fasteners lineup, giving a trade-focused choice for everyday fastening tasks where consistent drive and head style matter.
The web description states that 3/4 inch and 1 inch lengths in this line are threaded fully, and all other sizes are threaded two-thirds from the bottom of the screw, so this 1-3/4 inch length follows the two-thirds threading pattern for balanced driving and clamping. Coarse thread pattern noted in the description lets the screw bite quickly, which helps when running into common woodworking substrates where fast engagement reduces strip-out risk under normal driving. The screw uses a Phillips drive and is specified for #2 Phillips drive bits, so impact drivers and drills can use standard bits without special tooling. The Type 17 auger point called out in the product name indicates a cutting-style tip that helps the screw start into material while moving chips, supporting smoother starts as you drive into stock.
This screw is part of the Wurth Baer Supply fasteners and screws category, aligning it with cabinet hardware and woodworking use where repeatable assembly is important. The #8 diameter works in many common cabinet and fixture layouts, letting you use established pilot hole routines across rails, stretchers, and carcass joints. At 1-3/4 inch long, the screw offers added reach for situations where you are fastening through a face frame or panel into thicker structural members, providing more thread engagement than shorter options from the same line. The flat head profile supports use wherever you countersink into wood or panel products, so the head can sit flush and allow parts such as drawers or doors to close without interference around the fastener locations. With a zinc finish identified in the description, the screw suits indoor environments common to shops, cabinets, and general interior fixtures, matching many other zinc fasteners used in similar assemblies.
The description notes that, for this series, lengths other than 3/4 inch and 1 inch are threaded two-thirds from the bottom, so the partially threaded shank on this 1-3/4 inch screw allows the unthreaded section to help draw materials together as the threads pull into the base piece. Coarse threads interact with typical woodworking substrates by advancing with fewer turns, which can reduce drive time when you are running many screws along cabinet sides or stretchers on a job. The Type 17 auger point named in the product title provides a cutting style tip that helps the screw start into wood while moving material out of the way, supporting steady driving action and reducing the effort required to establish a bite at the start of the hole. Case hardened construction mentioned in the description gives the screw a hardened structure, so the head and shank handle normal driving torque without deforming, which is helpful when using powered drivers all day in production or install settings. The zinc finish, also specified, works well in typical interior woodworking environments, so you can match this screw with other zinc fasteners on the same project for a consistent approach to interior assemblies.
This Wurth #8 x 1-3/4 inch assembly screw uses a Phillips drive and is specified for #2 Phillips drive bits, so it works with common driver bits used in many drills and impact drivers.
The web description notes that lengths other than 3/4 inch and 1 inch are threaded two-thirds from the bottom, so this 1-3/4 inch screw has partial threading that helps draw materials tightly together.
The Type 17 auger point referenced in the name provides a cutting-style tip that helps the screw start into material and move chips, giving smoother starts when driving into wood.
This product sits in Wurth Baer Supply's fasteners and screws category and features a flat head, coarse threads, and a Type 17 auger point, which align well with many woodworking assembly tasks.
The description specifies a zinc finish, providing a coated surface that suits many indoor cabinet, fixture, and general woodworking environments where basic corrosion resistance is sufficient.
The web description notes case hardened construction, which gives the screw a hardened outer structure so the head and threads better handle normal driving torque in repeated installations.
The Wurth #8 x 1-3/4 inch flat head assembly screw combines a Phillips drive, coarse threads, Type 17 auger point, zinc finish, and case hardened construction, so it fits many cabinet and woodworking assembly setups handled by Wurth Baer Supply customers. The specified two-thirds threading for this length supports pull-together action between joined parts, helping installers and shop teams tighten joints efficiently across repeat projects. For buyers needing a trade-focused fastener from the Wurth screws line, this product provides a clearly defined size, head style, drive type, point design, and finish suited to interior assembly work.
Sold In: 1000 Each
