Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #8 x 2" flat head assembly screw combines a twinfast double-lead thread with a sharp point and #2 Phillips drive to deliver quick penetration and efficient seating in chipboard, particleboard, MDF, and similar engineered wood panels. Packed 1000 to the box, it is sized for production cabinet shops and millwork operations that need a dependable, consistent screw for everyday panel assembly.
This is a production assembly screw for engineered wood panels. It performs well in chipboard, particleboard, MDF, and melamine-faced sheet goods — the materials that make up the bulk of cabinet carcass work. The twinfast thread covers ground fast, which matters when a shop is driving hundreds of screws per shift. The flat countersunk head seats cleanly into the panel face, leaving a flush surface that requires no further preparation on exposed interiors. For cabinet boxes, drawer box sides, shelf dados, and back-panel attachment, this screw handles the repetitive work efficiently.
The black finish is a practical choice when screws will remain visible inside dark cabinet interiors or against black melamine and laminate panels. It does not call attention to the fastener the way a zinc or bright steel finish would. This screw is designed for interior woodworking applications in dry environments. It is not rated for exterior use or for contact with moisture.
A shop assembling kitchen cabinets, bath vanities, or case goods on a production schedule needs screws that drive without hesitation and seat consistently run after run. The twinfast thread cuts the number of driver rotations per screw, which adds up across a full day of assembly. The #2 Phillips drive is the bit already in the driver — no changeover, no compatibility question. And a 1000-piece box means the bin stays full through the work week. This screw is a workable fit for small shops running individual builds as well, but the pack quantity and thread design make it especially well suited to higher-volume environments.
This screw is designed for chipboard, particleboard, MDF, and melamine-faced engineered panels — the standard materials in cabinet carcass construction. The sharp point and twinfast thread are optimized for the low-to-medium density fiber matrix of those substrates.
In most engineered panel materials, the flat head will self-countersink as the screw seats. In harder or thinner materials, a pre-drilled countersink may produce a cleaner result. The screw does not carry underhead nibs, so the head relies on the screw's driving action rather than milling features to seat flush.
A twinfast thread has two thread helices starting at offset positions on the shank. The screw advances twice as far per driver revolution compared to a single-lead thread of the same pitch, which reduces installation time in high-volume assembly work.
No. The black finish on this screw is suited to dry indoor environments. For exterior or moisture-exposed work, choose a screw with a corrosion-resistant coating rated for that exposure.
Yes. This screw accepts a #2 Phillips bit, which is the standard size for #8 gauge screws and the bit most commonly used in cabinet shop and construction drivers.
When the job is cabinet carcasses, drawer boxes, and panel assembly at production pace, this Würth flat head twinfast screw gives the shop a consistent, fast-driving fastener that seats cleanly and keeps the line moving.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |