Flat head assembly screw describes a Wurth #8 x 2 inch screw that provides a flush surface in wood assemblies, which matters when you want cabinet parts and panels to pull tight without a raised fastener head snagging other components.
This screw is identified as a Wurth flat head assembly screw combo drive, so it accepts both square and Phillips driver styles, giving flexibility on site when different installers use different bits but need to work the same run of fasteners.
The screw uses a coarse thread, which bites aggressively into typical woodworking substrates, so parts draw together quickly and reduce the likelihood of spinning in softer material when you are pulling joints tight.
The type 17 auger point on this screw helps it start into wood efficiently, which matters when driving near edges or working fast on repetitive cabinet or fixture assembly where clean starting reduces split risk and rework.
This screw is case hardened, so its surface is engineered for strength in driving, which supports consistent seating when running long rows with powered drivers in shop or on-site installations.
The black finish on this screw provides a dark appearance at the fastener head, which is useful where visible screws need to blend with darker materials or hardware in finished assemblies.
The web description notes that 3/4 inch and 1 inch lengths in this family are threaded fully while all other sizes are threaded two-thirds from the bottom of the screw, which means this 2 inch length has partial threading that can help clamp two pieces together as the smooth shank lets the top piece draw tight.
This screw uses a type 17 auger point, which is designed to feed into wood as it rotates, so drilling often becomes faster because the point helps clear a path while the coarse thread advances the screw.
The case hardened construction supports repeated driving and potential removal, which is important when running work with power drivers where bit slippage or over-torque might otherwise damage a softer screw.
Using #2 Square Drive bits for insertion, as specified in the description, gives positive engagement at the head, which can translate to straighter driving and more predictable seating depth along long cabinet runs.
This Wurth flat head assembly screw in #8 x 2 inch size fits many cabinet and woodworking builds where two boards or panels need to be drawn together firmly, because the coarse thread at the lower portion anchors securely in the base piece.
The note that only 3/4 inch and 1 inch lengths are fully threaded while other sizes are threaded two-thirds from the bottom means this 2 inch screw has a partial thread layout, which helps the unthreaded upper section slide through the near piece and pull it tight against the anchored substrate as the threads engage.
The flat head design lets the head sit level with or below the wood surface after a countersink, which is important when you want overlay parts, hinges, or other hardware to sit flat without rocking or when you plan to cover the head with filler or caps for a cleaner look.
The black finish on the screw head gives a dark, discreet appearance at the surface, which works well where the fastener may remain visible against darker laminates, painted surfaces, or black hardware so the head visually blends with the rest of the installation.
Because the screw is described as an assembly screw, it is oriented toward bringing components together rather than light-duty anchoring, which aligns with cabinet assembly, jig building, and fixture construction where joint strength and pull-down action matter.
The combo drive on this flat head assembly screw works with #2 Square Drive bits for insertion, so during initial installation the driver bit locks into the screw recess and transmits torque efficiently, which reduces stripping at the head when running at production speeds.
The ability to use #2 Phillips Drive bits for after market adjustment means later service or small alignment tweaks can be handled using common Phillips bits, which keeps field adjustments straightforward when a square drive bit is not on hand.
The type 17 auger point at the tip of the screw is designed to cut its way into the wood as it spins, which supports faster starts and reduces wandering at the point, helping maintain accurate placement relative to edges or layout lines in joinery.
The coarse thread matched to the auger point lets the screw advance quickly once engaged, which shortens driving time on repetitive assembly lines and helps pull joints tight with fewer driver cycles.
Case hardened construction gives the screw surface a harder driving interface, which supports the combo drive recess during high-torque use so the head geometry stays functional for any later after market adjustment with either square or Phillips bits.
The Wurth #8 x 2 flat head assembly screw is a case hardened, coarse thread, type 17 auger point screw, so it is set up for pulling wood assemblies together with strong driving performance.
The combo drive accepts #2 Square Drive bits for primary insertion and #2 Phillips Drive bits for after market adjustment, giving flexibility for both production driving and later service work.
The web description states only 3/4 inch and 1 inch sizes are fully threaded, so this 2 inch screw is threaded about two-thirds from the bottom, which helps clamp two pieces together as the top piece slides on the shank.
The type 17 auger point helps the screw start and feed into wood efficiently, supporting quicker driving and cleaner starts near edges during cabinet and fixture assembly.
This screw combines coarse thread, type 17 auger point, and partial threading on the 2 inch length, so it bites strongly into a base piece while pulling the top piece tight in wood assemblies.
The black finish creates a dark head appearance, which helps the fastener visually blend with darker finishes or hardware where the screw head remains exposed.
This flat head assembly screw from Wurth brings together a #8 x 2 inch size, coarse thread, and type 17 auger point, so it fits many cabinet and woodworking joints where strong pull-down and efficient driving matter.
The combo drive that accepts both #2 Square Drive bits for insertion and #2 Phillips Drive bits for after market adjustment supports practical workflows in shops and field service, keeping installations and later tuning on the same fastener style.
When a black, case hardened flat head screw with partial threading suits your assembly approach, this Wurth option aligns with wood-focused fastening where flush heads, strong bite, and adaptable drive options are priorities.
Sold In: 4000 Each
