Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 3/4-inch pan head screw is built specifically for mounting cabinet hinges and drawer slides. The compact length is well matched to the shallow mounting plates of European-style hinges and side-mount drawer slides, where a longer screw would over-penetrate and a shorter one would sacrifice grip.
At 3/4 inch, this screw is sized for the thin mounting conditions common to European cup hinges and drawer slide hardware. Most hinge mounting plates and slide brackets are fastened to 3/4-inch cabinet panels, and a screw of this length threads fully into the panel without breaking through the face veneer or laminate on the opposite side. That makes it a reliable choice for frameless cabinet boxes and face-frame installations alike, where the hardware sits directly against the panel surface and panel integrity matters.
The pan head profile provides a broad, flat clamping surface that bears evenly across hinge and slide mounting plates. It does not require a countersink, so the screw drops straight through the pre-bored holes in the hardware and clamps the plate firmly against the panel. The Type 17 Auger point handles the entry work: the fluted tip clears material as the screw starts, reducing the torque needed to drive into particleboard, MDF, and hardwood cabinet sides. That matters on an installation where the same motion is repeated dozens of times across a cabinet run.
Hinge and drawer slide installation is one of the highest-repetition fastening tasks in a cabinet shop. A 10,000-piece box keeps the bin stocked through long production runs without the interruption of a mid-job reorder. The #2 Phillips drive means no specialty bits are required, and the zinc finish is appropriate for the dry interior conditions of residential and commercial cabinetry. This screw is a shop-floor staple for production cabinet makers, custom shops, and hardware installers who need a dependable, consistently performing mounting screw in large quantity.
Yes. The 3/4-inch length and pan head are well suited to both frameless boxes and face-frame cabinets where hardware mounting plates sit directly against the panel surface.
Pan heads are designed to bear against flat surfaces without a countersink, so the head will seat flat against the mounting plate as long as the plate holes match the #8 gauge.
Even at 3/4 inch, the Type 17 Auger point reduces starting torque and helps the screw enter particleboard and MDF cleanly. That translates to less effort and less risk of the screw wandering during repetitive driving.
Zinc plating provides standard indoor corrosion protection, which covers the humidity levels typical of kitchen and bath cabinetry in residential and light commercial settings.
The coarse thread and Type 17 Auger point are effective in particleboard, MDF, plywood, and hardwood cabinet panels — the materials most commonly used for cabinet box construction.
When hinge and drawer slide work is part of every job, a short, reliable pan head screw in volume packaging removes one variable from the process and lets the installation focus stay on the hardware itself.
Sold In: 10000 Each
